31 March 2025 in IEEE Internet of Things Journal
This article explores the energy efficiency (EE) of a mobile-edge computing (MEC) architecture for Internet of Things (IoT) networks, in which multiple IoT devices (IoTDs) perform local computations while further offloading part of their tasks to the base station (BS)-enabled MEC server utilizing the time division multiple access (TDMA) protocol. To address the radio propagation issues caused by obstructions, we utilize an uncrewed aerial vehicle (UAV)-mounted active reconfigurable intelligent surface (RIS), referred to as a flying-RIS (FRIS), to reflect and even amplify the incident signal from IoTDs to the BS. Since tasks can be executed in parallel on both IoTDs and the BS, the assignment of service timeslots, the UAV trajectory, and the resource allocation for both IoTDs and FRIS should be jointly optimized to maximize system EE. To this end, we reformulate the optimization problem as a markov decision process (MDP) and introduce a deep reinforcement learning (DRL) approach for addressing the formulated problem, called the proximal policy optimization (PPO) based resource allocation with trajectory design and FRIS reflection matrix optimization (PPO-RATDFRO) algorithm. By continuously interacting within the constructed environment, the proposed system iteratively refines its policy to determine the FRIS trajectory and reflection matrix, along with the service timeslots and computation resources for each IoTD. Finally, simulation results demonstrate that the proposed PPO-RATDFRO algorithm significantly enhances EE for all served IoTDs, compared to various benchmark algorithms.
29 November 2024 in IEEE Internet of Things Journal
This paper investigates an unmanned aerial vehicle (UAV) relay network in the urban Internet of Things (IoT) environment designed to facilitate communications for ground terminals (GTs) by transmitting their data to a remote base station (BS) using the decode and forward (DF) protocol, where the orthogonal frequency division multiple access (OFDMA) is adopted for the GTs’ transmissions.To address the challenges posed by building obstructions on radio propagation, we incorporate the multiple reconfigurable intelligent surfaces (RISs) to improve the quality of the GTs-UAV and UAV-BS links.The primary objective is to maximize the sum rate of all the GTs through the joint optimization of UAV trajectory, GTs transmit power, sub-channel allocation, and multi-RIS phase shifts.To this end, we reformulate the optimization problem as a markov decision process (MDP) and propose a deep reinforcement learning (DRL) approach for addressing our formulated problem, called the soft actor critic based sub-channel allocation and phase shift optimization with trajectory design (SAC-CAPSTD) algorithm.By continuously interacting with the environment, the proposed system refines its policy to determine the optimal UAV flight trajectory and the sub-channel allocation strategy for GTs within their transmit power constraints.Concurrently, a discrete phase shift optimization method is implemented to adjust the phase shift for each RIS element.Finally, numerical results confirm that the proposed SAC-CATDPS algorithm can significantly achieve higher sum rate of all the served GTs and exhibit better convergence performance compared with the benchmark DRL-based algorithms.
1 December 2019 in Optics Communications
1 July 2017 in Chinese Physics Letters
A wideband tunable frequency-doubling optoelectronic oscillator (FD-OEO) is proposed and experimentally demonstrated based on a polarization modulator and an optical bandpass filter (OBPF). The central frequency of the correspondingly fundamental OEO could be adjusted by tuning the bandwidth and central frequency of the OBPF, which could also be regarded as a photonic-assisted tunable microwave filter. The frequency tuning range of the FD-OEO covers from 9.5 to 32.8 GHz, and the single sideband phase noise of the fundamental signal is lower than −100 dBc/Hz at an offset of 10 kHz. Moreover, the frequency stability of the generated signal is investigated by measuring its Allan deviation. The Allan deviation of the generated fundamental signal at 10 GHz is 2.39×10−9.
1 October 2023 in Journal of Physics: Conference Series
Multicore fiber is regarded as the most efficient way to realize SDM networks. Fabrication of low-loss and low-crosstalk multi-core fiber is the key to achieving high-capacity communication systems. This paper designed and fabricated low transmission loss seven-core single-mode fiber with a standard 125μm cladding diameter based on modified chemical vapor deposition. The preform of MCF is fabricated using drilling method. The seven-core fiber has achieved a low transmission loss of 0.19~0.28dB/km throughout the 1250-1600nm wavelength range. The transmission loss is below 0.19dB/km at 1550nm wavelength. The crosstalk is below -54dB/100km from 1200nm to 1600nm wavelength by utilizing a trench-assisted structure. At 1550nm wavelength, the bending loss (BL) is lower than 0.45dB/m with a bending radius of 5 mm, and the BL is 0.05dB/m with a bending radius of 15 mm. The fabricated multi-core fiber can be used for long-haul transmission and space division multiplexing communication systems.
20 July 2023 in SCIENTIA SINICA Physica, Mechanica & Astronomica
基于纳米结构的二次谐波发射是构建高灵敏度生化传感器等纳光子器件的重要手段,其中如何获得增强的二次谐波发射是实现这些应用的关键。本文采用溶剂热法制备出类钻石的十二面体铌酸锂纳米晶体颗粒,实现了磁偶极共振模式的有效激发。基于磁偶极共振对入射场能量的聚焦作用,以及铌酸锂材料本身所具有的较强二阶非线性响应,所制备铌酸锂纳米晶体颗粒能够实现二次谐波的增强发射。不同粒径铌酸锂颗粒散射光谱及二次谐波发射光谱的测试结果表明,当激发光波长与纳米颗粒的磁偶极共振模式匹配时,可有效增强二次谐波发射强度,其非线性转换效率达到2.0 × 10-6 W-1。这些研究结果表明本文所制备的铌酸锂纳米晶体颗粒是一种较为理想的非线性纳米材料,在非线性纳光子器件的设计等领域具有潜在的应用价值。