30 June 2016 in Eastern-European Journal of Enterprise Technologies
Patterns of interrelation between the ambercontaining mining mass and vibrohydraulic intensifier were defined with the substantiation of its technological parameters for creating the required density of the medium, which provides for maximal extraction of amber. Existing methods and methods for the extraction of amber were analyzed and a new method for the extraction of amber out of ambercontaining sand field was proposed, providing for higher efficiency of its recovery while negative impact on the natural environment is reduced. Laboratory and field studies were carried out on ambercontaining sand fields in RivnenskyVolynsky region with the purpose of improvement of existing technologies of extraction of amber. When carrying out experimental research, we determined the main technological parameters of hydromechanical method of amber extraction and determined the patterns of influence of water and air on the liquefaction of ambercontaining sandy media when an array is exposed to the action of a vibrohydraulic intensifier, during which a maximal speed of amber recovery to the surface is achieved.In the process of field research, we implemented the latest technology and achieved maximum extraction of amber in the deposit, which is 90–95 % of the total mass.
30 October 2016 in Eastern-European Journal of Enterprise Technologies
The study proves the efficiency of using electric separation for extracting the copper concentrate from a crushed mass of basalt, lava-breccia, and tuff after their preliminary magnetic separation. We have determined the preferred particle-size classes (–1.0 +0.63 mm) in the processes of preparing the ore and classifying the components of the basaltic rock mass (from –0.25 +0.05 mm to –1.0 +0.63 mm) before electric separation; the copper concentrate outputs have been specified for basalt, tuff, and lava-breccia with regard to the electric field voltage for different particle-size fractions in the initial product. The undertaken tests have revealed a linear dependence of the native copper output on the electric field voltage of the separator, which must be taken into account while developing the technological scheme of extracting native copper from basaltic raw materials. We have proved that all the three components of the basaltic raw material (basalt, lava-breccia, and tuff) contain some percentage of copper that is of commercial interest. To extract substantial amounts of copper, it is essential to have a specific particle-size composition of the basaltic raw material before feeding it into the electric separator (basalt – 10.370 %, lava-breccia – 5.741 %, and tuff – 4.074 %; thereby, the particle size class of the feedstock is –1.0 +0.63 mm, and the electric field voltage is 30 kW). The obtained findings help develop the basic requirements for industrial tests. It is expedient to carry out more field tests and to create an industrial site for a complex processing of basalt raw materials. The completed study is a necessary element of developing a non-waste technology of processing the basalts of the Rafalovsky basalt quarry in Ukraine. In addition to native copper, these deposits contain such useful components as iron, titanium, manganese, and a silicate part. While extracting strategically valuable raw materials, the ecological situation in the region is improved due to the processing of industrial wastes such as tuff and lava-breccia.
28 February 2017 in Eastern-European Journal of Enterprise Technologies
Effectiveness of the use of technogenic tuff placers for the extraction of heavy metals, which are accumulated on the objects of processing mineral raw material, was shown. It was experimentally proved that the distribution of metals in a technogenic placer is uneven both by the height and lengthwise in a placer. The bulk of metal with the hydraulic mix is concentrated in the central section of a placer and forms the heavy metals zone in the form of the core with percentage from 59.46 % to 85.35 %. Pulp consistency (P:T) in the studies was accepted in ratio 80 % to 20 %; 85 % to 15 %; 90 % to 10 % with percentage of native copper 0.5 %, 0.75 %, 1 % with respect to the tuff weight. Under conditions of placers formation on a plane, we substantiated the regularities of heavy metals distribution, which makes it possible to determine their position and to design parameters of the zones of increased metal concentration in the body of a technogenic placer. It is proven that the height and the length of the base of a technogenic cone-shaped placers depend on the density of hydraulic mix. The height of a placer increases at an increase in ratio P:T, and the width of its base decreases. A formula for determining parameters of the zones of heavy metals concentration in the body of a technogenic placer was obtained. Parameters of the zones of increased content of heavy metals in a technogenic placer change by a dependence, described by polynomial of third degree. Polynomial coefficients characterize the dynamics of formation of the core of a placer, where from 59.46 % to 85.35 % of heavy metals are concentrated. Obtained results of the studies indicate the need for processing technogenic waste, which include precious metals, by searching for the zones of their maximum concentration by the established regularity for the purpose of their extraction and further processing.Results of the studies make it possible to develop initial requirements for conducting commercial tests and creating an area for processing technogenic tuff placers for the purpose of extraction of copper and other metals.
30 March 2024 in Mining of Mineral Deposits
Purpose.Develop an efficient assessment model for amber placers within the analyzed block involving its content in the samples taken inside the block as well as out of it. Methods. To obtain results, a complex of scientific procedures has been applied consisting of system analysis; generalization; mathematical statistics; mathematical, perfect, and psychical modelling; field experiment; and forecasting. Findings. Methods to assess amber placer reserves have been substantiated. The potential of discrete kriging has been involved inclusive of the search for the best evaluation of amber content within the analyzed block taking into consideration the mineral percentage in the samples taken inside the block as well as out of it. Originality. The research has helped understood that the discrete kriging results help assess average amber content within the square and curvilinear zones tending to the central well (in terms of amber percentage) both in the central well and in wells of the first and second contact zones. Practical implications.Identification of the most efficient technique, assessing amber reserves, improves forecasting reliability of the resources with minimal cost.
1 January 2020 in Mining of Mineral Deposits