1 January 2011 in Journal of Propulsion and Power
A study is conducted to predict graphite/carbon-carbon nozzle erosion behavior in solid rocket motors for wide variations of propellant formulations. The numerical model considers the solution of Reynolds-averaged Navier- Stokes equations in the nozzle, heterogeneous chemical reactions at the nozzle surface, variable transport and thermodynamic properties, and heat conduction in the nozzle material.Two different ablation models are considered and compared: a surface equilibrium approach and a finite-rate model. Results show that the erosion rate is diffusion limited for metallized propellants, ensuring sufficiently high wall temperatures, and it is kinetic limited for nonmetallized propellants. For low surface temperatures, the two models are consistent with each other and predict the same erosion rate, while the surface equilibrium model overpredicts the recession at low surface temperatures. The calculated results show an excellent agreement with the experimental data from the ballistic test and evaluation system motor firings, and the finite-rate model actually improves the predictions when the kinetic-limited regime is approached. 2010. Copyright © 2010 by D. Bianchi, F. Nasuti, M. Onofri, and E. Martelli
1 July 2010 in Journal of Spacecraft and Rockets
A study of graphite ablation in reentry flows is carried out by a surface ablation approach integrated with a two- dimensional axisymmetric Navier-Stokes solver. The gas-surface interaction model is based on chemical equilibrium ablation with surface mass and energy balances fully coupled with the numerical solver and can account for both surface oxidation and sublimation. The surface temperature is obtained from the steady-state ablation approximation. This numerical procedure can predict aerothermal heating, chemical species concentrations, and carbon material ablation rate over the heat-shield surface of reentry vehicles. Two-dimensional axisymmetric simulations have been performed to numerically reproduce the ablation of a graphite sphere cone that has been tested in the Interaction Heating Facility at the NASA Ames Research Center. The freestream conditions of the selected test case are typical for Earth reentry from a planetary mission. The predicted ablation rate and surface temperature assuming frozen chemistry in the flow show a good agreement with the available experimental data. The agreement is further improved freezing the nitrogen recombination reaction at the surface to be more consistent with experimental observation, which has shown nitrogen atom recombination not to occur at the graphite surface. Copyright © 2010 by D. Bianchi, F. Nasuti, and E. Martelli
9 January 2023 in Journal of Fluid Mechanics
A direct numerical simulation of an oblique shock wave impinging on a turbulent boundary layer at Mach number 2.28 is carried out at moderate Reynolds number, simulating flow conditions similar to those of the experiment by Dupont et al. (J. Fluid Mech., vol. 559, 2006, pp. 255–277). The low-frequency shock unsteadiness, whose characteristics have been the focus of considerable research efforts, is here investigated via the Morlet wavelet transform. Owing to its compact support in both physical and Fourier spaces, the wavelet transformation makes it possible to track the time evolution of the various scales of the wall-pressure fluctuations. This property also makes it possible to define a local intermittency measure, representing a frequency-dependent flatness factor, to pinpoint the bursts of energy that characterise the shock intermittency scale by scale. As a major result, wavelet decomposition shows that the broadband shock movement is actually the result of a collection of sparse events in time, each characterised by its own temporal scale. This feature is hidden by the classical Fourier analysis, which can only show the time-averaged behaviour. Then, we propose a procedure to process any relevant time series, such as the time history of the wall pressure or that of the separation bubble extent, in which we use a condition based on the local intermittency measure to filter out the turbulent content in the proximity of the shock foot and to isolate only the intermittent component of the signal. In addition, wavelet analysis reveals the intermittent behaviour also of the breathing motion of the recirculation bubble behind the reflected shock, and allows us to detect a direct, partial correspondence between the most significant intermittent events of the separation region and those of the wall pressure at the foot of the shock.
1 May 2009 in Journal of Spacecraft and Rockets
A study is conducted to predict carbon–carbon nozzle recession behavior in solid rocket motors for wide variations of propellant formulations and motor operating conditions. The numerical model considers the solution of Reynolds-averaged Navier–Stokes equations in the nozzle, heterogeneous chemical reactions at the nozzle surface, variable transport and thermodynamic properties, and heat conduction in the nozzle material. Results show that the ablation rate is largely determined by the diffusion of the major oxidizing species (H2 O, CO2 , OH) to the nozzle surface. Both the concentration of the major oxidizing species (affected by the aluminum content of the propellant) and the chamber pressure exert a strong influence on the ablation rate: it increases almost linearly with chamber pressure and it decreases with increasing aluminum content of propellants. The calculated results show an excellent agreement with the experimental data from the ballistic test and evaluation system motor firings
1 March 2005 in Journal of Propulsion and Power
Dual-bell nozzles represent a possible solution to improve the performance of large liquid rocket engines for launcher first stages. The present paper studies the role of the second bell shape on the side loads that can occur during the transition between the two main operating modes of the nozzle. In particular, the design of the second bell profile is critically discussed on the basis of results obtained from suitable test cases. The analysis of performance and behavior during the transition is carried out by a.validated turbulent Navier-Stokes solver. Geometries were generated by the method of characteristics. Results show that slightly different geometries designed by the method of characteristics yield modest: performance changes but severe differences in behavior during the transition phase
1 March 2007 in AIAA Journal
Dual-bell nozzles permit two different operating modes, which provide higher performance than conventional bell nozzles when applied to rocket engines operating from sea level. During the low-altitude mode, the flow is separated and the separation line is located near the inflection of the nozzle wall, in a region characterized by a negative value of the wall pressure gradient, as in conventional nozzles, and in which side loads may occur. The characteristics of this region in hot full-scale applications are addressed by means of numerical simulations, and scaling laws are sought for cold subscale side-load experiments. Moreover, the flow behavior during the transition between the two operating modes is analyzed by time-accurate simulations