PEDOT:PSS is widely used as a hole transport layer (HTL) in perovskite solar cells (PSCs) due to its facile processability, industrial scalability, and commercialization potential. However, PSCs utilizing PEDOT:PSS suffer from strong recombination losses compared to other organic HTLs. This results in lower open-circuit voltage (VOC) and power conversion efficiency (PCE). Most studies focus on doping PEDOT:PSS to improve charge extraction, but it has been suggested that a high doping level can cause strong recombination losses. Herein, we systematically dedope PEDOT:PSS with aqueous NaOH, raising its Fermi level by up to 500 meV, and optimize its layer thickness in p-i-n devices. A significant reduction of recombination losses at the dedoped PEDOT:PSS/perovskite interface is evidenced by a longer photoluminescence lifetime and higher magnitude of surface photovoltage, leading to an increased device VOC, fill factor, and PCE. These results provide insights into the relationship between doping level of HTLs and interfacial charge carrier recombination losses.
Light soaking (LS) is a well-known but poorly understood phenomenon in perovskite solar cells (PSCs) which significantly affects device efficiency and stability. LS is greatly reduced in large-area inverted PSCs when a PC61BM electron transport layer (ETL) is replaced with C60, where the ETL is commonly in contact with a thin bathocuproine (BCP) interlayer. Herein, we identify the key molecular origins of this LS effect using a combination of surface photovoltage, ambient photoemission spectroscopy, Raman spectroscopy, integrated with density functional theory simulations. We find that BCP forms a photoinduced charge-transfer (CT) complex with both C60 and PC61BM. The C60/BCP complex accelerates C60 dimer formation, leading to a favourable cascading energetic landscape for electron extraction and reduced recombination loss. In contrast, the PC61BM/BCP complex suppresses PC61BM dimer formation, meaning that PC61BM dimerisation is not the cause of LS. Instead, it is the slow light-induced formation of the PC61BM/BCP CT complex itself, and the new energetic transport levels associated with it, which cause the much slower and stronger LS effect of PC61BM based PSCs. These findings provide key understanding of photoinduced ETL/BCP interactions and their impact on the LS effect in PSCs.
Perovskite solar cells achieve high power conversion efficiencies but usually rely on vacuum-deposited metallic contacts, leading to high material costs for noble metals and stability issues for more reactive metals. Carbon-based materials offer a cost-effective and potentially more stable alternative. The vast majority of carbon-electrode PSCs use the negative-intrinsic-positive (n-i-p) or "hole-transport-layer-free" architectures. Here, we present a systematic study to assess the compatibility of "inverted", p-i-n configuration PSC contact layers with carbon top electrodes. We identify incompatibilities between common electron transport layers and the carbon electrode deposition process and previously unobserved semiconducting properties in carbon electrodes with unique implications for charge extraction and electronic behavior. To overcome these issues, we introduce a double-layer atomic layer deposited tin oxide (SnO2) and Poly-(2,3-dihydrothieno-1,4-dioxin)-poly-(styrenesulfonate) (PEDOT:PSS), yielding up to 16.1% PCE and a retained 94% performance after 500 h of outdoor aging. The study is a crucial step forward for printable, metal-electrode-free, and evaporation-free perovskite PV technologies.
Performance losses in positive–intrinsic–negative architecture perovskite solar cells are dominated by nonradiative recombination at the perovskite/organic electron transport layer interface, which is particularly problematic for wider bandgap perovskites. Large endeavours have been dedicated to the replacement of fullerenes, which are the most commonly used class of electron transport layers, with limited success thus far. In this work, we demonstrate blending the fullerene derivatives [6,6]-phenyl C61 butyric acid methyl ester (PCBM) and indene-C60 bis-adduct (ICBA) as a thin interlayer between 1.77 eV bandgap perovskite and an evaporated C60 layer. By tuning the fullerene blend to a trace 2% by mass of PCBM in ICBA, we remarkably form an interlayer which features improved energetic alignment with the perovskite and the PCBM : ICBA fullerene mixture, together with a stronger molecular ordering and an order of magnitude higher electron mobility than either neat PCBM or ICBA. Additional molecular surface passivation approaches are found to be beneficial in conjunction with this approach, resulting in devices with 19.5% steady state efficiency, a fill factor of 0.85 and an open-circuit voltage of 1.33 V, which is within 10% of the radiative limit of the latter two device parameters for this bandgap. This work highlights the complex nonlinear energetic behaviour with fullerene mixing, and how control of the energetics and crystallinity of these materials is crucial in overcoming the detrimental recombination losses that have historically limited perovskite solar cells.
18 February 2026 in ACS Applied Materials & Interfaces
As lab-scale perovskite solar cells (PSCs) approach their efficiency limits, reproducing this performance in large-area, manufacturable devices remains challenging. Here, we show that printing interlayers of metal oxide nanoparticles, specifically Al2O3 and SnO2, can systematically control the morphology and interfacial energetics of solution-processed PC61BM electron transport layers (ETLs) in flexible roll-to-roll printed PSCs. These nanoparticle interlayers enhance ETL uniformity, reduce pinholes, and increase shunt resistance, improving power conversion efficiencies (PCEs) and reducing device failure rates by 50%. Through a combination of systematic device characterization, morphological, spectroscopic and energetic analysis, coupled with drift-diffusion simulations, the distinct roles of insulating (Al2O3) and semiconducting (SnO2) nanoparticle interlayers in mediating carrier extraction and recombination are elucidated. Al2O3 suppresses interfacial recombination and improves device reproducibility, albeit with some penalty in short-circuit current, whereas SnO2 enhances electronic coupling and charge extraction, delivering a champion PCE of 11.0% (active area: 0.5 cm2). Incorporating SnO2 interlayers into larger-area modules (active area: 7.2 cm2) further demonstrates the robustness of this strategy under manufacturing-relevant conditions. Together, these results provide an important framework for nanoparticle-mediated interface engineering and establish a simple, effective, and scalable route to improving both performance and yield in printed large-area PSCs.