12 October 2022 in The Journal of Physical Chemistry B
In this paper, the solubility of methane in water along the 400 bar isobar is determined by computer simulations using the TIP4P/Ice force field for water and a simple LJ model for methane. In particular, the solubility of methane in water when in contact with the gas phase and the solubility of methane in water when in contact with the hydrate has been determined. The solubility of methane in a gas-liquid system decreases as temperature increases. The solubility of methane in a hydrate-liquid system increases with temperature. The two curves intersect at a certain temperature that determines the triple point T3 at a certain pressure. We also determined T3 by the three-phase direct coexistence method. The results of both methods agree, and we suggest 295(2) K as the value of T3 for this system. We also analyzed the impact of curvature on the solubility of methane in water. We found that the presence of curvature increases the solubility in both the gas-liquid and hydrate-liquid systems. The change in chemical potential for the formation of hydrate is evaluated along the isobar using two different thermodynamic routes, obtaining good agreement between them. It is shown that the driving force for hydrate nucleation under experimental conditions is higher than that for the formation of pure ice when compared at the same supercooling. We also show that supersaturation (i.e., concentrations above those of the planar interface) increases the driving force for nucleation dramatically. The effect of bubbles can be equivalent to that of an additional supercooling of about 20 K. Having highly supersaturated homogeneous solutions makes possible the spontaneous formation of the hydrate at temperatures as high as 285 K (i.e., 10K below T3). The crucial role of the concentration of methane for hydrate formation is clearly revealed. Nucleation of the hydrate can be either impossible or easy and fast depending on the concentration of methane which seems to play the leading role in the understanding of the kinetics of hydrate formation.
9 May 2023 in The Journal of Chemical Physics
In this paper, the solubility of carbon dioxide (CO2) in water along the isobar of 400 bar is determined by computer simulations using the well-known TIP4P/Ice force field for water and the TraPPE model for CO2. In particular, the solubility of CO2 in water when in contact with the CO2 liquid phase and the solubility of CO2 in water when in contact with the hydrate have been determined. The solubility of CO2 in a liquid–liquid system decreases as the temperature increases. The solubility of CO2 in a hydrate–liquid system increases with temperature. The two curves intersect at a certain temperature that determines the dissociation temperature of the hydrate at 400 bar (T3). We compare the predictions with T3 obtained using the direct coexistence technique in a previous work. The results of both methods agree, and we suggest 290(2) K as the value of T3 for this system using the same cutoff distance for dispersive interactions. We also propose a novel and alternative route to evaluate the change in chemical potential for the formation of hydrates along the isobar. The new approach is based on the use of the solubility curve of CO2 when the aqueous solution is in contact with the hydrate phase. It considers rigorously the non-ideality of the aqueous solution of CO2, providing reliable values for the driving force for nucleation of hydrates in good agreement with other thermodynamic routes used. It is shown that the driving force for hydrate nucleation at 400 bar is larger for the methane hydrate than for the carbon dioxide hydrate when compared at the same supercooling. We have also analyzed and discussed the effect of the cutoff distance of dispersive interactions and the occupancy of CO2 on the driving force for nucleation of the hydrate.
17 March 2023 in The Journal of Chemical Physics
In this work, we shall estimate via computer simulations the homogeneous nucleation rate for the methane hydrate at 400 bars for a supercooling of about 35 K. The TIP4P/ICE model and a Lennard-Jones center were used for water and methane, respectively. To estimate the nucleation rate, the seeding technique was employed. Clusters of the methane hydrate of different sizes were inserted into the aqueous phase of a two-phase gas–liquid equilibrium system at 260 K and 400 bars. Using these systems, we determined the size at which the cluster of the hydrate is critical (i.e., it has 50% probability of either growing or melting). Since nucleation rates estimated from the seeding technique are sensitive to the choice of the order parameter used to determine the size of the cluster of the solid, we considered several possibilities. We performed brute force simulations of an aqueous solution of methane in water in which the concentration of methane was several times higher than the equilibrium concentration (i.e., the solution was supersaturated). From brute force runs, we infer the value of the nucleation rate for this system rigorously. Subsequently, seeding runs were carried out for this system, and it was found that only two of the considered order parameters were able to reproduce the value of the nucleation rate obtained from brute force simulations. By using these two order parameters, we estimated the nucleation rate under experimental conditions (400 bars and 260 K) to be of the order of log10 (J/(m3 s)) = −7(5).
4 February 2021 in The Journal of Physical Chemistry B
Using computer simulations, the structural properties of solvation water of three model hydrophobic molecules, methane and two fullerenes (C60 and C80), were studied. Systems were simulated at temperatures in the range of 250–298 K. By analyzing both the local ordering of the molecules of water in the solvation layers and the structure of hydrogen bond network, it is shown that in the solvation layer of hydrophobic molecules, ordered aggregates consisting of water molecules are formed. Even though it is difficult to define the exact structure of these aggregates, their existence alone is clearly noticeable. Moreover, these aggregates become more pronounced with the decrease of temperature. The existence of the ordered aggregates around the hydrophobic solutes complies with the concept of “icebergs” proposed by Frank and Evans.
7 April 2025 in The Journal of Chemical Physics
We investigate the nucleation of carbon dioxide (CO2) hydrates from carbon dioxide aqueous solutions by means of molecular dynamics simulations using the TIP4P/Ice and the TraPPE models for water and CO2, respectively. We work at 400 bar and different temperatures and CO2 concentrations. We use brute force molecular dynamics when the supersaturation or the supercooling is so high so that nucleation occurs spontaneously and Seeding otherwise. We use both methods for a particular state and found an excellent agreement when using a linear combination of q̄3 and q̄12 order parameters to identify critical clusters. With such order parameter, we get a rate of 1025 m−3 s−1 for nucleation in a CO2 saturated solution at 255 K (35 K of supercooling). By comparison with our previous work on methane hydrates, we conclude that nucleation of CO2 hydrates is several orders of magnitude faster due to a lower interfacial free energy between the crystal and the solution. By combining our nucleation studies with a recent calculation of the hydrate–solution interfacial free energy at coexistence [Algaba et al., J. Colloid Interface Sci. 623, 354–367 (2022)], we obtain a prediction of the nucleation rate temperature dependence for CO2-saturated solutions (the experimentally relevant concentration). On the one hand, we open the window for comparison with experiments for supercooling larger than 25 K. On the other hand, we conclude that homogeneous nucleation is impossible for supercooling lower than 20 K. Therefore, nucleation must be heterogeneous in typical experiments where hydrate formation is observed at low supercooling. To assess the hypothesis that nucleation occurs at the solution-CO2 interface, we run spontaneous nucleation simulations in two-phase systems and find, by comparison with single-phase simulations, that the interface does not affect hydrate nucleation, at least at the deep supercooling at which this study was carried out (40 and 45 K). Overall, our work sheds light on molecular and thermodynamic aspects of hydrate nucleation.
19 August 2016 in The Journal of Chemical Physics
Water molecules from the solvation shell of the ice-binding surface are considered important for the antifreeze proteins to perform their function properly. Herein, we discuss the problem whether the extent of changes of the mean properties of solvation water can be connected with the antifreeze activity of the protein. To this aim, the structure of solvation water of a type III antifreeze protein from Macrozoarces americanus (eel pout) is investigated. A wild type of the protein is used, along with its three mutants, with antifreeze activities equal to 54% or 10% of the activity of the native form. The solvation water of the ice-binding surface and the rest of the protein are analyzed separately. To characterize the structure of solvation shell, parameters describing radial and angular characteristics of the mutual arrangement of the molecules were employed. They take into account short-distance (first hydration shell) or long-distance (two solvation shells) effects. The obtained results and the comparison with the results obtained previously for a hyperactive antifreeze protein from Choristoneura fumiferana lead to the conclusion that the structure and amino acid composition of the active region of the protein evolved to achieve two goals. The first one is the modification of the properties of the solvation water. The second one is the geometrical adjustment of the protein surface to the specific crystallographic plane of ice. Both of these goals have to be achieved simultaneously in order for the protein to perform its function properly. However, they seem to be independent from one another in a sense that very small antifreeze activity does not imply that properties of water become different from the ones observed for the wild type. The proteins with significantly lower activity still modify the mean properties of solvation water in a right direction, in spite of the fact that the accuracy of the geometrical match with the ice lattice is lost because of the mutations. Therefore, we do not observe any correlation between the antifreeze activity and the extent of modification of the properties of solvation water.