1 January 2000 in Robotica
This paper attempts firstly to derive a mathematical model of the dynamics of a set of dual fingers with soft and deformable tips which grasps and manipulates a rigid object with some dexterity. To gain a physical insight into the problem, consideration is restricted to the case that the motion of the whole system is confined to a horizontal plane. Secondly on the basis of the derived model it is shown that the rotation of the object can be indirectly controlled by the change of positions of the center points of both contact areas on the object. Then, each of the center points of contact areas can be positioned by inclining the last link of each corresponding finger against the object. It is further shown that, when both forces of pressing the object becomes almost equal, the equation of motion of the object in terms of rotational angles assumes the form of a harmonic oscillator with a forcing term, which can be regulated coordinately by the relative angle between the two last links contacting with the object. It is also shown that dynamics of this system satisfy passivity. Finally, design problems of control for dynamic stable grasping and enhancing dexterity in manipulating things are discussed on the basis of passivity analysis.
27 January 2023 in Journal of Intelligent & Robotic Systems
This paper presents a comprehensive review of ground agricultural robotic systems and applications with special focus on harvesting that span research and commercial products and results, as well as their enabling technologies. The majority of literature concerns the development of crop detection, field navigation via vision and their related challenges. Health monitoring, yield estimation, water status inspection, seed planting and weed removal are frequently encountered tasks. Regarding robotic harvesting, apples, strawberries, tomatoes and sweet peppers are mainly the crops considered in publications, research projects and commercial products. The reported harvesting agricultural robotic solutions, typically consist of a mobile platform, a single robotic arm/manipulator and various navigation/vision systems. This paper reviews reported development of specific functionalities and hardware, typically required by an operating agricultural robot harvester; they include (a) vision systems, (b) motion planning/navigation methodologies (for the robotic platform and/or arm), (c) Human-Robot-Interaction (HRI) strategies with 3D visualization, (d) system operation planning & grasping strategies and (e) robotic end-effector/gripper design. Clearly, automated agriculture and specifically autonomous harvesting via robotic systems is a research area that remains wide open, offering several challenges where new contributions can be made.
1 February 2012 in Robotics and Autonomous Systems
1 December 2010 in IEEE Transactions on Neural Networks
In this paper, we address unresolved issues in robot force/position tracking including the concurrent satisfaction of contact maintenance, lack of overshoot, desired speed of response, as well as accuracy level. The control objective is satisfied under uncertainties in the force deformation model and disturbances acting at the joints. The unknown nonlinearities that arise owing to the uncertainties in the force deformation model are approximated by a neural network linear in the weights and it is proven that the neural network approximation holds for all time irrespective of the magnitude of the modeling error, the disturbances, and the controller gains. Thus, the controller gains are easily selected, and potentially large neural network approximation errors as well as disturbances can be tolerated. Simulation results on a 6-DOF robot confirm the theoretical findings.
1 February 2012 in Automatica