Jamil Haddad

Jamil Haddad

Auto-generated profile, based on publicly available information

Jamil Haddad

Department of Mechanical Engineering, Faculty of Engineering Technology, Al-Balqa Applied University, Amman, Jordan

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 July 2023 in Archives of Mining Sciences
Verified
Journal Article
Open access
PDF file
JHJamil Sami Haddad
Jamil Sami Haddad
ODOleksandr Denyshchenko
Oleksandr Denyshchenko
DKDmytro Kolosov
Dmytro Kolosov
SBStanislav Bartashevskyi
Stanislav Bartashevskyi
VRValerii Rastsvietaiev
Valerii Rastsvietaiev
OCOleksii Cherniaiev
Oleksii Cherniaiev
Reducing WeaR of the Mine RopeWays coMponents Basing upon the studies of theiR contact inteRaction to improve the durability of the rollers of supporting and guiding devices as well as traction ropes of ropeway facilities based upon the analysis of their contact interaction. theoretical studies of a mathematical model of contact interaction of mine ropeway components to determine regularities of the formation of dynamic efforts within the contact area and experimental studies of the plant under mine conditions. Based upon a mathematical model, contact stresses within the zone of contact of traction rope with guiding rollers and drive sheaves of mine ropeways under real operating conditions have been determined. the obtained results are validated experimentally under mine conditions. innovative patent-protected design solutions have been proposed; the solutions make it possible to considerably increase the durability of the ropeway components. it has been determined that methods of surface increase in the strengthening of a roller working surface do not have proper effect as the strengthened layer on a soft base cracks and delaminates due to high contact loads; maximum angle of rope bending on rollers of supporting devices (6º-in operation manual; 15º-in safety rules) recommended for GrW is overstated. it shouldn't be more than 1.5º in terms of values of contact stresses for standard plants; development of prestressed compression state in the material of elastic lining of a drive friction sheave allows increasing considerably (by two times and more) its service life. ropes with reduced diameters of external layer wires (Ukraine's regulatory document-dSt 2688) being used currently on mine ropeways do not meet the operating conditions and have a short period of service life due to their corrosive and fatigue breaking. to lengthen the service life of GrW traction ropes, it is required to change for the ropes with increased diameters of the external layer wires with preliminarily clamped strands.

9 April 2019 in Journal of The Institution of Engineers (India): Series D
Verified
Journal Article
Closed access
PDF file
VSV. I. Symonenko
V. I. Symonenko
JHJamil Sami Haddad
Jamil Sami Haddad
OCO. V. Cherniaiev
O. V. Cherniaiev
VRValerii Rastsvietaiev
Valerii Rastsvietaiev
MAM. O. Al-Rawashdeh
M. O. Al-Rawashdeh

28 February 2022 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Verified
Journal Article
Closed access
AIA. O Ihnatov
A. O Ihnatov
YKYevhenii Koroviaka
Yevhenii Koroviaka
JHJamil Haddad
Jamil Haddad
BTB. A Tershak
B. A Tershak
TKT. M Kaliuzhna
T. M Kaliuzhna
VYV. V Yavorska
V. V Yavorska
Purpose. To analyse certain complex components of the rock breaking act during the well construction stipulated by the design features of the technical means of hydromechanical drilling and diversity of manifestations of hydraulic and physicochemical properties of the activated circulation medium. Methodology. Physicochemical parameters of the process of active substance adsorption from the water solutions on the rock surfaces were studied in terms of their disperse material by identifying optimal ratio in the solid phase particles volume of the activated solution group with the recording of time interval of the adsorption equilibrium establishment. Features of bottomhole processes in terms of the operating modernized facilities of hydromechanical drilling were considered involving up-to-date methods of analytical analysis and experimental-laboratory studies, i.e. by using certain techniques of mathematical and physical modelling, methods for processing and interpretation of the research results by means of SolidWorks, STATGRAPHICS, D, and control-and-measuring equipment and materials. Findings. The peculiarities of the combined hydromechanical drilling technique have been analysed from the viewpoint of the creation of the most efficient conditions of bottomhole rock breaking. Since a considerable degree of the development of breaking processes is the practically proved factor of hydromechanical drilling, the rationalization and intensification of those processes may be achieved by means of controlled physicochemical effect of the surface active medium. The experimental study was carried out to analyse the directedness of the development and results of surface interaction adsorption within the boundary of phase separation as the main factor of intensification of the rock mass breaking. A comparative analysis was performed concerning the surface activity of the corresponding substances that differ in their schemes of dissociation in a water solution whose properties are to be corrected additionally to make them close to the ones peculiar for natural drill muds. Positive influence of the adsorption phenomenon on the results of contact interaction of breaking elements of hydromechanical facilities was examined; this phenomenon is shown in the decelerated wear of metal surfaces. Originality. Useful influence of the physicochemical properties of the substances under consideration decreases beginning from the ionogenic anion-active sulfonol towards the ionogenic cation-active katapin K and to the non-ionogenic substance OP-10 (-10). However, in terms of combining the compositions of the mentioned substances, it can be strengthened additionally. Practical value. The indicated laboratory and experimental studies are the basic ones to design the mode parameters of the washing programme for a hydromechanical drilling well; they belong to the main output data used while substantiating the design and technical-technological parameters of the modernized pellet impact devices.

1 November 2019 in Journal of Mining Science
Verified
Journal Article
Closed access
PDF file
OSO. O. Shustov
O. O. Shustov
JHJ. S. Haddad
J. S. Haddad
AAA. A. Adamchuk
A. A. Adamchuk
VRValerii Rastsvietaiev
Valerii Rastsvietaiev
OCO. V. Cherniaiev
O. V. Cherniaiev
Layouts of reloading points in the cyclical-and-continuous technology for deep-level surface mining are analyzed. The innovative structure of a reloading point involving dump trucks drivethrough passing has been proposed; the structure will make it possible to increase reloading point productivity, cut the costs for rock mass extraction, and reduce the time of motor transport maneuvering. Dependence of general funds saving for overburden rock extraction upon the open pit depth while constructing a reloading point with the drivethrough passing comparing to a dead-end unloading of various-capacity dump trucks has been determined.

24 July 2023 in Archives of Mining Sciences
Verified
Journal Article
Closed access
PDF file
AIAndrii Ihnatov
Andrii Ihnatov
JHJamil Sami Haddad
Jamil Sami Haddad
YKYevhenii Koroviaka
Yevhenii Koroviaka
OAOleksandr Aziukovskyi
Oleksandr Aziukovskyi
VRValerii Rastsvietaiev
Valerii Rastsvietaiev
ODOlena Dmytruk
Olena Dmytruk

9 July 2019
Verified
Conference Paper
Open access
PDF file
OTOleksandr Tytov
Oleksandr Tytov
JHJamil Haddad
Jamil Haddad
VSVitalii Sukhariev
Vitalii Sukhariev
The aim of the work is modelling of stressed condition of the loose mined rock thin layer between two parallel working plates of disintegrator, taking into consideration the dependences of the layer porosity and its side thrust coefficient on the main stress value with hereditary model of deformation accumulation. The equation of extreme balance of mined rock compactable thin layer is obtained for the case of its compression with partial sliding on working surfaces. It is shown, that there is no sliding in the central area of deformed zone, unlike the peripheral area. The iterative algorithm for parameters calculation of the layer stressed condition for the hypothesis of symmetric parabolic distribution of the axial normal stresses in the directions being perpendicular to the plates is developed. The distributions of the side thrust coefficient in the layer, the effective coefficient of external friction and the stresses of disintegrators working surfaces are grounded. The practical value of the research is the possibility to determine precisely the contact forces while crushing of fine-grained material taking into consideration its compactibility.