The power delivery requirements for the early microprocessors were fairly rudimentary due to the relatively low power levels. However, several decades of exponential scaling powered by Moore’s law has greatly increased the power requirements and the complexity of the power delivery scheme. The breakdown in Dennard scaling in the mid-2000s has ushered in the multi-core era which has increased the number of cores and the power consumption in microprocessors. The steady growth in the power levels and the number of power rails in high performance microprocessors has increased the power delivery challenges. Integrated Voltage Regulators (IVR) have emerged as a key power delivery technology to address these challenges. There are a number of IVR schemes implemented on-die ranging from the simple power gate to fully integrated switching regulators. After covering the fundamentals of power delivery, this paper discusses the pros and cons of the different types of IVR as well as the technology ingredients required to meet future IVR requirements. The paper concludes with a section on advanced packaging technologies that are being developed and needed to enable heterogeneous integration and their impact on power delivery.
14 December 2021 in IEEE Transactions on Power Electronics
This article presents a 48–1 V merged-two-stage hybrid-switched-capacitor converter with a linear extendable group operated point-of-load (LEGO-PoL) architecture for ultrahigh-current microprocessors, featuring 3-D stacked packaging and coupled inductors for miniaturized size, fast speed, and vertical power delivery. The architecture is highly modular and scalable. The switched-capacitor circuits are connected in series on the input side to split the high input voltage into multiple stacked voltage domains. The multiphase buck circuits are connected in parallel to distribute the high output current into multiple parallel current paths. It leverages the advantages of switched-capacitor circuits and multiphase buck circuits to achieve soft charging, current sharing, and voltage balancing. The inductors of the multiphase buck converters are used as current sources to soft-charge and soft-switch the switched-capacitor circuits, and the switched-capacitor circuits are utilized to ensure current sharing among the multiphase buck circuits. A 780-A vertical stacked CPU voltage regulator with a peak efficiency of 91.1% and a full load efficiency of 79.2% at an output voltage of 1 V with liquid cooling is built and tested. The switched capacitor circuits operate at 286 kHz and the buck circuits operate at 1 MHz. It regulates output voltage between 0.8 and 1.5 V through the entire 780-A current range. This is the first demonstration of a 48–1 V CPU voltage regulator to achieve over 1-A/mm $^\text{2}$ current density and the first to achieve 1000-W/in $^3$ power density.
28 November 2023 in IEEE Transactions on Power Electronics
This article presents the design and optimization of a miniaturized 48-V-to-1-V, 240-A linear-extendable group operated point-of-load (LEGO-PoL) CPU voltage regulator module (VRM)— Mini-LEGO —with a volume of 30 mm×11.2 mm × 8.4 mm. The Mini-LEGO converter provides vertical power delivery, and it achieves a peak efficiency of 87.1%, a full load efficiency of 84.1%, and a power density of 1390 W/in $^{3}$ when stepping down a 48 V input voltage to an output voltage of 1 V. The Mini-LEGO offers compact device implementation, simple gate drive circuitry, and a fast regulation-stage switching frequency of 1.5 MHz. The 9-mm-by-9-mm, 4-phase, 20-A-per-phase vertical coupled inductor has a per-phase transient inductance of 10.3 nH, with its coupling reducing the ripple by a factor of six, and a height of 2.5 mm. This vertical coupled inductor structure is designed following a systematic approach to minimizing its height while achieving significant current ripple reduction and maintaining sufficient saturation margin. Thermal simulations are performed to verify the cooling feasibility. A measurement characterization method for vertical coupled inductor structures is introduced and used to characterize the designed vertical coupled inductor.
Circuit area scaling driven by Moore’s law coupled with the push to thinner packages for mobile microprocessors has reduced the volume available for Air Core Inductors (ACI). This translates to a reduction in the conversion efficiency of Fully Integrated Voltage Regulator (FIVR). Magnetic Inductor Array (MIA) modules are used for the first time on the 10 th generation Intel Core™ microprocessor in mobile segments to improve FIVR efficiency. In addition to improving the peak efficiency, it is also possible to realize large light load efficiency gains and minimize voltage ripple through the use of magnetic inductors. This paper covers the magnetic inductor array (MIA) design considerations for improving performance as well as meeting high volume manufacturability and reliability requirements.
28 January 2022 in IEEE Journal of Solid-State Circuits
A buck converter using a low-voltage GaN nMOS power transistor with 5– $10\times $ superior switching figure-of-merit over Si laterally-diffused MOS (LDMOS) and stacked CMOS at 5 V has been employed to build a high-frequency (3–20 MHz), high-density (9 A/mm 2 ) buck converter for high-performance-compute applications. The GaN-based converter is co-packaged with a CMOS Companion Die on a 4 mm $\times $ 4 mm package and employs on-die gate clamps to minimize the impact of package parasitics for high efficiency. For 5-V input to 1-V output conversion, the converter achieves 94.2% peak efficiency at 3.1-MHz switching frequency with a 40-nH inductor, and >80% peak efficiency at 20 MHz with an air-core inductor.
5 July 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
This paper discusses a reduced-order modeling and simulation approach for fast transient power integrity verification at full system level. The reference structure is a complete power distribution network (PDN) from platform voltage regulator module (VRM) to multiple cores, including board, package, decoupling capacitors, and per-core fully integrated voltage regulators (FIVR). All blocks are characterized and known through high-fidelity models derived from first-principle solvers (full-wave electromagnetic and circuit-level extractions). The complexity of such detailed characterization grows very large and becomes intractable, especially for power integrity verification of massive multicore platforms subjected to real workload scenarios. We approach this problem by exploiting a multi-stage macromodeling and compression process, leading to a compact representation of the system dynamics in terms of a linearized state-space structure with multiple feedback loops from the FIVR controllers. The PDN macromodel is obtained through a data-driven approach starting from reference small-signal frequency responses, obtaining a sparse and structured representation specifically designed to match the behavior of the reference system. The resulting compact model is then solved in time-domain very efficiently. Results on mobile and enterprise server benchmarks demonstrate a speedup in runtime up to 50× with respect to HSPICE, with negligible loss of accuracy.