1 February 2004 in Science and Technology of Welding and Joining
Results of computer simulations of long term service exposure for weldments of the CSN 15 128/P91 and SK3STC/P91 steels are presented and compared with corresponding results of phase and composition experiments. The welded material P91 (EU designation: X10CrMoVNb 9–1) represents progressive chromium steel alloyed with molybdenum, vanadium, carbon, and nitrogen. The CSN 15 128 (13CrMoV 2–5) material is low alloy Cr–Mo–V steel. The SK3STC alloy (12CrMo 10–10) represents the consumable electrode material. The stability of the weldment microstructure is investigated at elevated temperatures (500–700° C). The simulation method is based on the Calphad approach complemented with the theory of multicomponent bulk diffusion, local conditions of phase equilibrium, and the assumption that diffusion is the process that controls the rate of phase transformation. Significant phase profiles, concentration profiles, and phase transformation processes in the diffusion affected zone are simulated, investigated, and compared with experimental results. The potentially deleterious carbon depleted region inside each weld joint is discussed. The method described can be used to predict microstructure instability in weld joints.
31 December 2008 in Journal of the European Ceramic Society
1 April 2015 in Surface and Coatings Technology
26 December 2018 in Materials Science Forum
In the present work, the High-Entropy Alloys Al0.2Co1.5CrFeNi1.5Ti, Al1.3Co1.4Cr2.0FeNi4.0Ti4.0 and Al6.0Co1.2Cr2.5FeNi3.5Ti6.0 were produced by Mechanical Alloying and subsequent Spark Plasma Sintering processes to obtain properly densified bulks. The characterization of the materials was accomplished through X-Ray Diffraction, Scanning Electron Microscopy, microhardness and nanoindentation tests to identify and analyze the acquired microstructures’ features, phases formed, morphology and size of the grains and its average hardness. The results indicate that it was possible to obtain alloys presenting high values of hardness and multi-phase microstructures. The effect of the multiple phases on the microstructures was discussed in terms of its influence on the mechanical properties. A satisfying densification level of the materials was achieved with the selected parameters.
10 September 2013 in Key Engineering Materials
The paper presents results obtained during evaluation of dissimilar weld joints of creep-resistant steels. During high temperature exposure of dissimilar weld joints, alloying elements were redistributed across the weld interface. These diffusion effects can cause local changes of microstructure and have a direct effect on local mechanical properties in weld interface area. Carbon and nitrogen have the strongest influence on changes of mechanical properties of steels. . These local changes of mechanical properties have a strong influence on the reliability and the service live of the whole welded structures. The dissimilar joints of the austenitic steel/martenzitic steel type was studied. Laboratory weld joints were prepared and annealed at different temperatures for different time periods. Microhardness profiles across the weld interface were measured and the influence of long-term, high temperature exposure on the changes of local microhardness was evaluated. Results were compared with pseudo-binary phase diagrams and with the literature.
6 June 2018 in Materiali in tehnologije