10 October 2017 in Advances in Materials Science and Engineering
To investigate the effects of nanoparticle content, storage time, and storage temperature on the storage stability of asphalt binders modified by nanoparticles, hot tube storage tests, softening point tests, and dynamic-shearing rheometer (DSR) tests were adopted to evaluate the properties of two kinds of nanotitanium dioxide (TiO2) modified asphalt binders. A statistical one-way analysis of variance (ANOVA) test was employed to analyze the effects of those variations on the storage stability of the nano-TiO2 modified asphalt binders. The results indicated that the softening point, the failure temperature, the dynamic-shear viscosity, and of the binders increased with nanoparticle content. The storage stability of the binders decreased with nanoparticle content. The impact of storage time on the storage stability of the binders was remarkable when the storage time was more than 48 h. Moreover, the storage stability of the binders at low temperatures was better than that at high temperatures. Based on the one-way ANOVA, the size of nanoparticle had little influence on the storage stability of the nano-TiO2 modified asphalt binders in this study. Reducing the nanoparticle size cannot effectively enhance the storage stability of the nanoparticle modified asphalt binder due to the agglomeration of nanoparticle.
1 January 2018 in Advances in Materials Science and Engineering
To determine and compare the fracture properties of different asphalt mixtures, single‐edge notched beam (SENB) tests using three types of asphalt mixtures were applied in this study under the conditions of different notched depths and different temperatures. The effects of notched depths and temperatures on the fracture toughness and fracture energy were analyzed. The results indicate that the notch depth has no significant effects on the fracture toughness and the fracture energy, but the gradation has relatively obvious effects on the fracture energy, which the larger contents of course aggregate leads to increase the discreteness of the fracture energy of the specimen. The temperature has significant effects on the ultimate loads, fracture energy, and fracture toughness. The ultimate loads of the SENBs reach the peak value at 0°C, which could be resulted in that viscoelastic properties of asphalt mixture depend with temperatures. The fracture toughness at −20°C of continuously graded asphalt mixtures are higher than those of gap‐graded asphalt mixtures. On the contrary, the fracture toughness of gap‐graded asphalt mixtures is higher at temperatures from −10°C to 20°C. The fracture energy increases with temperatures, and the fracture energy of SMA‐13 is significantly larger than those of AC‐13 and AC‐16.