4 September 2024 in Nature Communications
Capturing extreme surface velocities with >50 km/s dynamic range, which arise in shock physics such as inertial confinement fusion (ICF), is beyond the reach of conventional photon Doppler velocimetry (PDV) systems due to the need for extremely large electrical bandwidth under such conditions. The recent ignition in ICF calls for new velocimetry that can measure velocities exceeding 100 km/s. Time lens PDV (TL-PDV) is a solution where the high frequency beat signal from a conventional PDV system is periodically temporally magnified in the optical domain using a time lens. Here we experimentally demonstrate TL-PDV for the first time, validate the performance over a 74 km/s velocity range with high accuracy using a temporal magnification factor of 7.6, and verify excellent agreement with conventional PDV for laser driven micro-flyer experiments. TL-PDV currently provides the largest velocity dynamic range among PDV systems and is scalable to even higher velocities, which makes it an ideal candidate for material characterization under the most extreme conditions such as optimizing fuel efficiency in ICF experiments.
9 May 2025 in Acta Materialia
9 March 2023 in Journal of Open Source Software
20 February 2025 in Physical Review E
Polycarbonate is commonly used in extreme environments, particularly in applications involving high-velocity impact. A critical failure mode in high-velocity impact is that of spallation, where intersecting release waves result in the dynamic fracture of the material under high-rate tension. Despite the ubiquity of polycarbonate, major gaps exist in our understanding of its behavior at high rates over very short timescales. Here we investigate the spallation of polycarbonate on nanosecond timescales at strain rates of ∼10^{6}s^{-1} through a data set of 117 spall experiments. The size and fidelity of our dataset allow us to calculate fundamental uncertainties associated with the spallation of polycarbonate. Compared to lower rate experiments, we observe higher spall strengths, a higher spall initiation threshold, and a more gradual decrease in spall strength with increasing prior shock stress. This paper provides a strong basis for future computational model development and brings up questions on the underlying mechanisms that control spallation in polymers at extreme strain rates.
30 March 2024 in Nature Communications
A method is developed for facile encapsulation of reactive organic bases with potential application for autonomous damage detection and self-healing polymers. Highly reactive chemicals such as bases and acids are challenging to encapsulate by traditional oil-water emulsion techniques due to unfavorable physical and chemical interactions. In this work, reactivity of the bases is temporarily masked with photo-removable protecting groups, and the resulting inactive payloads are encapsulated via an in situ emulsion-templated interfacial polymerization method. The encapsulated payloads are then activated to restore the organic bases via photo irradiation, either before or after being released from the core-shell carriers. The efficacy of the photo-activated capsules is demonstrated by a damage-triggered, pH-induced color change in polymeric coatings and by recovery of adhesive strength of a damaged interface. Given the wide range of potential photo-deprotection chemistries, this encapsulation scheme provides a simple but powerful method for storage and targeted delivery of a broad variety of reactive chemicals, promoting design of diverse autonomous functionalities in polymeric materials.
7 June 2024 in Journal of Dynamic Behavior of Materials