Efficient electrochemical splitting of water to hydrogen and oxygen using cheap and abundant metal ion based catalysts is of fundamental significance to solar devices. For an efficient water splitting reaction, the development of a highly active, robust and cost-effective catalyst is desirable. Herein, we report iron oxyhydroxide thin films as an efficient water oxidation catalyst. The films have been electrochemically deposited applying anodic potential in the presence of a nonaqueous solvent, using ferrocene as the metal ion precursor and exclude interference from the problems of precipitation of iron hydroxide during the deposition process. The as-prepared films exhibit high catalytic activity towards the oxygen evolution reaction under alkaline as well as under near neutral conditions. Long term testing results showed that the films were able to oxidize water for almost 8 h of continuous operation with a current density of 10 mA cm−2 at an overpotential of 600 mV under near neutral conditions. The facile method of electrodeposition reported here with outstanding catalytic efficiency is of great significance for the large scale production of hydrogen.
Graphite oxides were synthesized following the Hummer's method using three different graphite precursors. The role of the graphite precursor and sodium nitrate during graphite oxide synthesis has been investigated. Different analytical techniques, namely powder X-ray diffraction, thermal gravimetric analysis, infrared spectroscopy, and ultraviolet-visible absorption spectroscopy have been implemented to characterize the synthesized graphite oxides. The study revealed that a longer c-axis (axis perpendicular to the carbon layer) in the graphite crystallite favored basal plane oxidations over sheet edge oxidations on the graphitic sheets during graphite oxide synthesis. These basal plane oxidations caused a strain in the graphitic sheets. Due to this strain, graphitic layers were cracked along the a-axis (axis in the carbon layer planes) and also layers were peeled off along the c-axis. Hence, crystallite sizes of the synthesized graphite oxides were significantly reduced compared to their graphite precursors. Furthermore, basal plane oxidations and consequently reduction in the crystallite sizes were enhanced by the addition of sodium nitrate during the synthesis.
14 February 2017 in Chemistry – A European Journal
A novel, easy, quick, and inexpensive integrated electrochemical methodology composed of cyclic voltammetry and amperometry has been developed for the determination of the kinetic stability of higher oxidation states for inorganic complexes. In this study, ferrocene and its derivatives have been used as model systems and the corresponding ferrocenium cations were generated in situ during the electrochemical experiments to determine their kinetic stabilities. The study found that the ferrocenium cations decompose following the first-order kinetics at 27 ± 3 °C in the presence of ambient oxygen and water. The half-lives of the ferrocenium, carboxylate ferrocenium, and decamethyl ferrocenium cations were found to be 1.27 × 103, 1.52 × 103, and ≫11.0 × 103 s, respectively, in acetonitrile solvent having a 0.5 M tetrabutylammonium hexafluorophosphate electrolyte. These results are in agreement with the previous reports, i.e. the ferrocenium cation is unstable whereas the decamethyl ferrocenium cation has superior stability. The new methodology has been established by performing various experiments using different concentrations of ferrocene, variable scan rates in cyclic voltammetry, different time periods for amperometry, and in situ spectroelectrochemical experiments.