20 October 2020 in IEEE Transactions on Power Electronics
Bipolar LVdc distribution is a promising solution for better integration of renewables and enhancement of system efficiency and reliability, but it also faces the challenge of pole voltage imbalance. By simple modifications of the bidirectional CLLC dc/dc converter, this article presents a dc/dc converter with integrated pole voltage balance capability. The converter presents less number of semiconductors, smaller overall footprint, and lower power loss compared to the employment of additional pole voltage balancers. Operating principle of this dc/dc converter and its inherent pole voltage balancing capability are explained, while further control scheme is also developed to compensate the small pole voltage difference caused by the dead time effect. Simulation results with 150 kW/±375 V bipolar output demonstrate the effectiveness of the converter, and the experimental results from a 500 W/±50 V downscaled prototype further prove the proposed concept.
7 July 2020 in IEEE Transactions on Power Electronics
This paper presents a DC solid state transformer based on three-level power module (TL-DCSST) for interconnection of MVDC and LVDC distribution system. The proposed TL-DCSST adopts the low-voltage IGBTs with excellent switching characteristics to build medium voltage power module (PM) and reduces the number of medium frequency transformer (MFT). This topology features inherent anti-bias mechanism for MFTs on the primary side, which saves the resonant capacitor at primary side. Meanwhile, the active front end (AFE) is integrated to realize voltage and power regulation, low voltage ride-through (LVRT) and DC fault handling for MVDC side. In the paper, the topology, operation principle, interleaving modulation, circuit parameter design and control schemes are presents and analyzed comprehensively. At last, a prototype rated at 7kW has been built and tested, and the experimental results verify effectiveness of the proposed TL-DCSST.
21 August 2018 in IEEE Transactions on Power Electronics
In recent years, significant progress has been made in HVDC transmission, particularly the voltage-source-converter (VSC) technology using modular multilevel converters. There is increasing demand to develop high-power DC/DC converters to interconnect HVDC systems with different voltage levels. In this paper, a novel hybrid DC/DC converter topology is proposed by combination of a new three-switch sub-module (SM) circuit and series-connected thyristors and diodes. This topology presents less amount of semiconductors, very attractive capital costs, small footprint, and low power losses. Operating principles of this new three-switch SM and the DC/DC converter are explained, while the modulation and control schemes are also developed. Validity of the proposed topology is verified by simulation results based on a 150MW, 200kV/300kV DC/DC converter. Efficiency estimates indicate that this topology could have power losses as low as 0.3% rated power. A scaled-down prototype has also been built and tested to confirm its effectiveness.
6 August 2021 in IEEE Transactions on Power Electronics
In this letter, a high-power step-up dc/dc converter dedicated to dc offshore wind farms is proposed, with the combination of half-bridge submodules, thyristors, diodes, and transformer. Compared with the other promising dc/dc topologies, the device numbers, costs, losses, and energy storage requirement are greatly reduced. The operation principle is introduced. The effectiveness and validity are confirmed by simulation and experimental results.
5 August 2019 in IEEE Transactions on Power Electronics
Recently, remarkable progress has been made in the voltage source converter (VSC) based high voltage direct current (HVDC) transmissions. For the upcoming need to interconnect multiple DC transmission lines with different voltage levels, high voltage and large power DC/DC converters are necessary. This paper investigates a non-isolated bidirectional DC/DC converter which is composed by cascaded half-bridge SMs, series connected diodes, and mechanical disconnectors. This hybrid topology presents very attractive features such as low cost, high efficiency, and light weight. Operation principle, parameter design, and dedicated control strategies are developed. Simulation of a 150MW, 200kV/300kV DC/DC converter has been performed to verify its performance and evaluate the efficiency. Moreover, a downscaled three-phase prototype rated at 500V/300V 4.5kW has been built and tested. The experimental results further confirm the effectiveness of the proposed DC/DC converter.
15 June 2020 in IEEE Transactions on Power Electronics
With the rapid development of voltage source converter (VSC) based high voltage direct current (HVDC) transmission, it is an irresistible trend that HVDC grid will come into being. High-voltage and high-power DC/DC converters will serve as DC transformers in HVDC grid to interconnect DC lines with different voltage ratings. This paper proposes a monopolar symmetrical DC/DC converter which is composed of cascaded half-bridge sub-modules (SMs) and series-connected IGBTs. This hybrid topology features low capital costs, high efficiency, small footprint, and bidirectional power transfer capability. Operation principle, parameter design, and the control strategies of this topology are introduced. A 480MW, ±500kV/±160kV monopolar symmetrical DC/DC converter is simulated to verify its performance and evaluate the efficiency. In addition, a downscaled prototype rated at 2.4kW, ±300V/±100V has been built and tested. Experimental results further validate the effectiveness of the proposed DC/DC converter.