14 June 2022 in International Journal of Architectural Heritage
This paper comparatively addresses the numerical modeling techniques for simulating the nonlinear behavior of unreinforced masonry (URM) walls. An experimental test program including two specimens with and without opening was conducted to document the behavior of the specimens. Both specimens were subjected to constant axial load and monotonically increasing in-plane lateral load during the tests. Two different modeling approaches, macro and detailed micro modeling, were considered to develop the finite element models (FEMs) of URM walls. The numerical simulation was performed using ABAQUS finite element software. The results of both modeling strategies were compared with experimental results in terms of the lateral load–displacement response and crack pattern of URM walls. Based on the comparison, the approaches implemented for numerical analyses are found reasonably applicable for simulating the in-plane response of URM walls with and without opening under lateral load.
1 September 2017 in Engineering Failure Analysis
1 November 2021 in Teknik Dergi
This paper presents the results from experimental study on the actual behavior of header end-plate connections. To better understand the hysteretic behavior of these connections in terms of the stiffness and the strength, sixteen specimens were considered and subjected to cyclic loads. The effect of some parameters such as thickness of the header end-plate, depth of the connection and the number of bolt rows on the behavior of header end-plate connections has been investigated by the help of experimental tests and finite element (FE) analyses. The moment-rotation relations of the connections governed by three parameters such as, initial stiffness, moment capacity and rotation capacity were obtained. Results revealed that the moment capacity increases with the increase in end-plate thickness and depth of connection. However, for the equal connection depth, increasing the number of bolt rows has not influenced the connection behavior remarkably.
7 October 2022 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Dışmerkez çaprazlı çelik çerçeveler (DMÇÇÇ), deprem etkisinde plastik şekildeğiştirmelerin sadece bağ kirişlerinde oluştuğu ve yapı sistemine etkiyen deprem enerjisinin akmaya ulaşan bağ kirişlerinin dönme deformasyonları ile sönümlendiği yatay yük taşıyıcı sistemlerdir. DMÇÇÇ sistemlerde birleşimler, kolonlar, çaprazlar ve bağ kirişi dışında kalan kiriş bölümleri pekleşme etkilerinin de dikkate alındığı, bağ kirişinin plastikleşmesine neden olan yükleme durumu altında hesaplanan tasarım kuvvetlerini karşılayacak şekilde boyutlandırılmaktadır. Bağ kirişi dışındaki elemanların tamamen elastik kalmasının sağlanması amacıyla tasarım dayanımlarının; deprem etkileri altında hesaplanan iç kuvvetlerin tasarım büyütme katsayısı ile büyütülerek yük birleşimlerinde kullanılması ile elde edilmesi gerekmektedir. Tasarım büyütme katsayılarının hesabında esas alınan pekleşme etkileri, TBDY 2018’de tanımlanan pekleşme katsayıları ile dikkate alınmaktadır. Çalışma kapsamında Avrupa tipi I-enkesitli (dar başlıklı / IPE) ve H-enkesitli (geniş başlıklı / HEB) çelik profiller ile teşkil edilen bağ kirişleri için pekleşme katsayısının incelenmesi amaçlanmıştır. Bu kapsamda 280 adet bağ kirişinin doğrusal olmayan sonlu eleman modeli tekrarlı tersinir (çevrimsel) yükleme altında analiz edilerek, kısa, orta ve uzun bağ kirişleri için pekleşme katsayıları elde edilmiştir. Bu katsayılar değerlendirildiğinde, TBDY 2018 kapsamında 1,25 olarak belirtilen pekleşme katsayısının orta ve uzun bağ kirişleri için uygun bir değer olduğu, ancak kısa bağ kirişleri için bu değerin; IPE profil kullanılması halinde ortalama olarak 1,68, HEB profil kullanılması halinde ise, ortalama olarak 1,65 olması gerektiği sonucuna varılmıştır, ayrıca normalleştirilmiş bağ kirişi uzunluğuna bağlı olarak pekleşme katsayısı formülü geliştirilmiştir.
1 July 2022 in Teknik Dergi
En tr This paper presents the influence of gravity framing on the collapse risk of steel frame buildings with perimeter special moment frames (SMFs) designed in Turkey. For this, four- and eight-story buildings have been designed considering the related current specifications and codes. Header end-plate connections are used for the beam-to-column joints of the gravity frame system. A nonlinear analytical model that simulates the hysteretic behavior of header end-plate connections is calibrated with past experimental data. Nonlinear static pushover analysis (NSPA) and nonlinear response history analyses (NRHAs) were implemented for both four-story and eight-story SMFs with and without the gravity framing to quantify their collapse performance and monitor the system-level seismic response of the building through collapse. The advantage of presence of the gravity framing is investigated and differences in structural responses between the models are also examined. When the models were excited by different ground motions, median responses of the detailed models showed an increase in lateral force carrying capacity and a decrease in first-story drift demand, compared to the nonlinear static pushover analyses results. Furthermore, the results demonstrate that gravity frames in a structure profoundly decrease the possibility of collapse. This paper presents the influence of gravity framing on the collapse risk of steel frame buildings with perimeter special moment frames (SMFs) designed in Turkey. For this, four- and eight-story buildings have been designed considering the related current specifications and codes. Header end-plate connections are used for the beam-to-column joints of the gravity frame system. A nonlinear analytical model that simulates the hysteretic behavior of header end-plate connections is calibrated with past experimental data. Nonlinear static pushover analysis (NSPA) and nonlinear response history analyses (NRHAs) were implemented for both four-story and eight-story SMFs with and without the gravity framing to quantify their collapse performance and monitor the system-level seismic response of the building through collapse. The advantage of presence of the gravity framing is investigated and differences in structural responses between the models are also examined. When the models were excited by different ground motions, median responses of the detailed models showed an increase in lateral force carrying capacity and a decrease in first-story drift demand, compared to the nonlinear static pushover analyses results. Furthermore, the results demonstrate that gravity frames in a structure profoundly decrease the possibility of collapse.