Tatiana Kolesnikova

Tatiana Kolesnikova

Auto-generated profile, based on publicly available information

Tatiana Kolesnikova

Український державний університет науки і технологій, м. Дніпро

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 July 2021 in Internal Combustion Engines
Verified
Journal Article
Open access
PDF file
ТKТ. М. Kolesnikova
Т. М. Kolesnikova
VZV.G. Zarenbin
V.G. Zarenbin
OSO. P. Sakno
O. P. Sakno
The article considers one of the topical directions of increasing fuel economy and reducing the toxicity of exhaust gases, namely, cylinder disconnection of internal combustion engines (ICE) in idling and partial loads. Current internal combustion engines with cylinder disconnection have enough technical solutions to ensure high fuel economy and ecological indicators of the engine working process. Accordingly, such engines require solution of the following tasks: improvement of mass-size indicators, cost reduction and design improvement, increase of reliability, etc. One of the main tasks of transport vehicles is also reducing the level of engine vibrations. This task is especially relevant for internal combustion engines with disconnected cylinders. When cylinders are disconnected, the unevenness of total torque increases from working processes in active cylinders and, as a result, the unevenness of the engine stroke, which affects the dynamic characteristics of the vehicle as a whole. To solve this problem, the general provisions of torsional momentum unevenness of internal combustion engines were considered. Total torsional torque of different engines was processed and data on the unevenness of torsional torque was obtained. The method of investigating the influence of cylinder switching, particularly the number of active cylinders on the unevenness of total torque is developed. The notion of torsional torque change degree with cylinder disconnection is introduced and the equation for its determination depending on the number of active cylinders is proposed. The notion of torsional torque coefficient change at disconnection of cylinders is also introduced. The application of the calculation of a four-cylinder inline engine for the possibility to compare changes in the torsional momentum unevenness when the cylinders are disconnected in the given engine was made. As a result of the calculations it was found that the torque unevenness coefficient at operation of the engine with 3, 2 and 1 cylinders in the average increases in 1,5; 2 and 3 times. The results of calculations were analyzed and histograms for all possible values of the number of active cylinders have been provided.

23 December 2020
Verified
Book Chapter
Closed access
PDF file
OSOlha Sakno
Olha Sakno
DMDmytro Moisia
Dmytro Moisia
IMIevgen Medvediev
Ievgen Medvediev
TKTatiana Kolesnikova
Tatiana Kolesnikova
Andrii RogovyiAndrii Rogovyi
Andrii Rogovyi

1 January 2020 in The National Transport University Bulletin
Verified
Journal Article
Closed access
VSVolodymyr Sakhno
Volodymyr Sakhno
PVPoliakov V
Poliakov V
SOSakno O
Sakno O
KTKolesnikova T
Kolesnikova T
In the article, the car safety control is simulated because of the change of its technical condition during operation using the functional resonance analysis method. The object of the study is car safety control because of the change of its technical condition during operation using the functional resonance analysis method. The purpose of the article, based on the method of functional resonance analysis, is to simulate the car safety control because of the change of its technical condition, which affects the deterioration of steerability, stability, smoothness and unning characteristics during operation. The research method is simulation modeling. To ensure the proper technical condition of the car, the technology of its maintenance has been analyzed. The practical processing of statistics is implemented using the ResilienceDS tool. On the basis of statistical data, the reasons for changing the technical condition of the running gear of the car and their influence on the operational properties were analyzed. ResilienceDS hardware is used to achieve this goal. Such a tool allowed us to model the socio- technical system "Human-Car-Organization of maintenance system" and to form formal models for the continuous evaluation of the stability and conditions of increasing the operation of cars. The data collected on the service station of cars was used to develop a maintenance model by the functional resonance analysis method. The model consists of a set of features that describe the steps taken to service a car. Simulation of the influence of the running gear technical condition on the performance of the car by the functional resonance analysis method has certainly revealed that car maintenance is a complex activity. The model by the functional resonance analysis method gave an idea of how successful and high-quality car maintenance works depend on the complex interaction of several of its parts that work in the technical system. Relationships are so complex that they are almost impossible to perceive. Thus, the important socio- technical mechanisms of the system "Human-Car-Organization of maintenance system" that regulate the relationship between functions. These can be informal, human mechanisms or specific tools, such as the level of technical condition of the car, the technological process of service, instructions and regulations of the repair team. The simulation of the influence of the technical condition of the undercarriage on the performance of the car by the functional resonance analysis method showed that considerable attention should be paid to elemental diagnostics. The performance of these functions is based more on current knowledge of the design of a new generation car and its maintenance technology, thus, may be more volatile. KEYWORDS: VEHICLE, CONTROL, SAFETY, TECHNICAL CONDITION, MAINTENANCE SYSTEM, FUNCTIONAL RESONANCE ANALYSIS METHOD

21 February 2024 in Theory and practice of metallurgy
Verified
Journal Article
Open access
PDF file
MBM.M. Boyko
M.M. Boyko
VYV.V. Yefimenko
V.V. Yefimenko
TMT.A. Makhorkina
T.A. Makhorkina
NPN.V. Polyakova
N.V. Polyakova
SZS.V. Zhuravlova
S.V. Zhuravlova
TKT.M. Kolesnikova
T.M. Kolesnikova
Purpose. One of the most critical challenges in the metallurgical industry is reducing dependence on natural gas used in the iron ore pellet firing process. The high cost and supply instability of natural gas have a significant impact on both the economy and the environment, particularly in the context of efforts to reduce CO2 emissions and other harmful substances. Replacing natural gas with biofuels, such as lignocellulosic biomass, could provide an effective solution to decrease fossil fuel consumption and improve the environmental performance of production. The primary objective of this study is to develop and optimize a method for using biofuels in the iron ore pellet firing process, aiming to achieve the required temperature regime while maintaining high product quality and minimizing the negative environmental impact. Methodology. Theoretical and experimental justification for the replacement of natural gas with biofuels in the iron ore pellet firing process was carried out using calculation formulas from relevant literature, as well as utilizing a web application for modeling and analyzing the results. Findings. The application of biofuels to replace natural gas in the iron ore pellet firing process revealed several important aspects. The introduction of biomass particles into the gas stream allowed for the partial replacement of natural gas without significantly affecting the thermal regime of the firing machine. This is because the combustion products of biomass, as well as the stoichiometric air volume required for complete biomass combustion, have a smaller volume compared to the combustion products and stoichiometric air volume required for natural gas. This helps to offset the lower calorific value of biomass. Based on the calculations and considering real-world experience with replacing natural gas with sunflower husks, it is proposed to burn 0.2 kg of sunflower husks, 0.125 kg of wood charcoal, 0.22 kg of sawdust, and 0.25 kg of straw for every 10% of replaced natural gas volume. Additionally, the combustion time of biomass particles was calculated depending on their initial diameter. The critical factor determining the combustion time of a particle is the volatile matter content, which in turn determines the amount of the particle’s coke residue. The combustion of the coke residue is the longest stage in the overall particle combustion time. The obtained combustion rates, from the highest to the lowest, are as follows: straw, sunflower husks, wood, and wood charcoal. This indicates that straw, as the fuel with the highest combustion rate, can have the largest particle size that meets the technological requirements for use in the firing machine burner. Originality. The combustion products of biomass have a smaller volume, which compensates for its lower calorific value and minimizes the impact on the thermal regime of the firing machine. Optimal biomass ratios have been proposed for replacing every 10% of the natural gas volume, including sunflower husks, wood charcoal, sawdust, and wheat straw. Additionally, based on the calculations of the combustion time of biofuel particles, it was found that straw has the highest combustion rate, allowing for the use of larger particle sizes in the firing machine burner, thus meeting technological requirements. Practical value. The calculations carried out in this work enable the replacement of 40 to 60 vol.% of natural gas with various types of plant-based fuels. Additionally, these calculations provide the means to assess the required granulometric composition of the fuel for use in the iron ore pellet firing process.

1 July 2018 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Verified
Journal Article
Closed access
TKT.N. Kolesnikova
T.N. Kolesnikova
OSO.P. Sakno
O.P. Sakno
OLO.V. Lysyi
O.V. Lysyi
NVN.O. Velmagina
N.O. Velmagina
Mathematical modeling of the operating process of the engine and means of increasing service life of vehicles