We describe the characteristics of thin HfAlO films deposited at low temperature by electron beam gun evaporation. As-deposited films thinner than 6 nm exhibit an effective dielectric constant (keff) of 9–11.5. The minimum quantum mechanical corrected effective oxide thickness is ∼1.45nm and the leakage currents are very low. Rapid thermal annealing in a N2 environment improves the leakage further and up to 750 °C does not affect keff. Higher annealing temperatures reduce keff, but even at 950 °C, it has a value of 6.5. These HfAlO films have the potential to serve as a substitute for SiO2 in small-scale metal-insulator-semiconductor structures.
18 February 2010 in IEEE Journal of Quantum Electronics
We numerically investigate the gain and phase recovery dynamics of quantum-dot (QD) semiconductor optical amplifiers (SOAs) by simultaneous consideration of the temporal and spectral variations. We solve 1088 coupled rate equations to simulate the carrier recovery dynamics of the inhomogeneously broadened QD ensemble, where QD electron and hole states are considered separately. The gain and phase recovery responses induced by an ultrafast pump pulse are calculated by considering different carrier relaxation time constants and spectral line shape functions involved in the successive carrier recovery process. The interband transition is assumed to have a Lorentzian line shape function and the intraband free-carrier absorption is described by the Drude model. We demonstrate that the actual behavior of the gain and phase recovery in QD SOAs can be clearly understood by simultaneously considering the temporal and spectral behavior of the gain and phase recovery responses, which are visualized by means of plots in the time and wavelength domains. We identify how the respective QD state-the ground state, the excited state, and an upper state-and quantum-well carrier reservoirs contribute to the gain and phase recovery of QD SOAs both temporally and spectrally.
We report on a chip scale parametric amplifier based on a GaInP photonic crystal waveguide. The amplifier operates with both pump and signal in the 1550 nm wavelength range and offers an on-chip gain of 11 dB (5 dB including the 6 dB coupling losses) when pumped at only 800 mW. It enables us, therefore, to incorporate the many advantages of parametric amplification within photonic chips for optical communication applications.
We present a simple technique of measuring the effect of the finite capture time of carriers in quantum well lasers on the homogeneity of the gain. The effect is measured using an extended cavity laser configuration in which we control the feedback level and compare the two extreme cases of a laser and a nonlasing amplifying gain medium. Broadband measurements of the spontaneous emission at energies near the top of the well and above the barriers show an inhomogeneous gain saturation which depends on the photon density inside the cavity. The results agree with a simple model for carrier injection in quantum well lasers.
23 August 2010 in IEEE Journal of Quantum Electronics
We describe a detailed model for carrier dynamics in tunneling injection quantum dot lasers. The model includes the spatial dependence of the mobile carriers and the coupling between mobile carriers and confined carriers. The Poisson and Schrodinger equations are solved together, which enables consideration of band structure modification due to an electron-hole interaction. The model is solved both in steady state and for temporal perturbations. Steady-state carrier distributions and the band structure are presented, as well as large and small signal modulation responses.
We describe time-resolved chirp measurements in InAs∕InP quantum-dash optical amplifiers operating at 1550 nm. We highlight the roles of gain saturation and of the saturating pulse duration relative to the gain recovery time. Using 10Gbit∕s data, we demonstrate a low transient α parameter of less than one which causes negative chirp at the leading edge and positive chirp during the trailing edge of the input pulse.