14 July 2017 in Journal of Materials Chemistry A
The immobilization of homogeneous catalysts within nanoporous membranes gives access to multi-functional composites, e.g. for use in flow reactors. Here, we report the fabrication of catalytically active porous block copolymer membranes prepared via non-solvent induced phase separation of amphiphilic block copolymers. Keggin-type polyoxometalates (POMs) [PV2Mo10O40]5− were immoblilized on the membrane by electrostatic interactions between the POM anions and the cationic surface charges of the hydrophilic poly(amino methacrylate) units. Morphological studies show that the original pore structure is retained in the functionalized hybrid membranes and the POMs are homogeneously distributed on the pore walls. The membranes were employed as heterogeneous composites for liquid-phase substrate oxidation with a focus on the oxidation of anthracene to anthraquinone and tetrahydrothiophene to tetrahydrothiophene oxide. The membranes show promising catalytic activity, can be re-used several times and deployed in prototype flow reactors. The results therefore demonstrate how highly tunable POM catalysts can be heterogenized on nanostructured block copolymer membranes, leading to advanced composite catalysts with potential relevance for industrial oxidation catalysis.
16 April 2015 in Advanced Materials Interfaces
1 August 2020 in AIP Advances
Stimuli-responsive surfaces are of practical importance for applications ranging from enhanced mixing of reagents in lab-on-a-chip systems until probing cellular traction forces. Non-destructive reversible bending of cilia-inspired magnetic pillars can be used for controlled transportation of non-magnetic objects and bio-inspired sensing. Magnetic actuation of micropillars suspended in liquids allows controlled mixing, propelling, and stirring of fluids as well as droplet manipulation, which are important for various applications including generation of cell spheroids and droplet coalescence in microfluidic systems. In order to expand their practical applications, fabrication processes capable of rapid prototyping have to be developed. Inspired by biological cilia and their functionalities, actuating hairy surfaces are herein fabricated and implemented to manipulate both microbeads and droplets. The artificial cilia are based on microscale magnetic pillar arrays made of flexible polydimethylsiloxane functionalized with magnetic microparticles. The arrays are fabricated by a new method using patterned molds that relies on cryogenic separation to produce transparent cilia-inspired arrays without requiring manual interference to clean the templates during the process. Magnetic actuation of the pillar arrays is demonstrated in isopropanol and silicone oil. Filling with oil yields magnetically responsive slippery lubricated surfaces allowing directional motion of droplets by repetitive bending and recovery of the flexible magnetic pillars. The achieved structures allow manipulation of microbeads and droplets which is uncommon even at the sub-mm scale; directional motion is demonstrated for 250 μm–550 μm sized droplets. Droplet transportation is facilitated by extremely low hysteresis and a high degree of omnidirectional bending of the pillar array.
4 December 2014 in Polymer Chemistry
We report on the synthesis of thiol-terminated, polyether-based amphiphilic block copolymers with a hydrophilic poly(ethylene oxide) (PEO) segment and a second crosslinkable block of either poly(furfuryl glycidyl ether) (PFGE) or poly(allyl glycidyl ether) (PAGE). Both block copolymers could be synthesized with narrow dispersities (Đ ≤ 1.07) via living anionic ring-opening polymerization (AROP). Introduction of the thiol-moiety enables the application of these block copolymers as ligands for the preparation of Au-nanoparticles (Au-NPs) by direct reduction of suitable precursors in N,N-dimethylacetamide (DMAc). The ligands of the obtained hybrid nanoparticles featuring an Au core and a block copolymer shell were crosslinked either via Diels–Alder reactions for the PFGE segment or via hydrosilylation chemistry targeting the PAGE segment. In this way, shell-crosslinked Au-NPs with enhanced stability against ligand exchange reactions in the presence of competitive ligands like alkyl thiols could be prepared.
15 January 2020 in Biomacromolecules
We show ionically crosslinked, temperature responsive reversible or irreversible hydrogels of anionic cellulose nanocrystals (CNCs) and methacrylate terpolymers by mixing them homogeneously in the initially charge-neutral state of the polymer, which was subsequently switched to be cationic by cleaving side-groups by UV-irradiation. The polymer is a random terpolymer poly(di(ethylene glycol) methyl ether methacrylate)-rnd-poly(oligo(ethylene glycol) methyl ether methacrylate)-rnd-poly(2-((2-nitrobenzyl)oxycarbonyl)aminoethyl methacrylate), i.e., PDEGMA-rnd-POEGMA-rnd-PNBOCAEMA. The PDEGMA and POEGMA repeating units lead to Lower Critical Solution Temperature (LCST) behavior. Initially, homogeneous aqueous mixtures are obtained with CNCs and no gelation is observed even upon heating to 60 oC. However, upon UV-irradiation the NBOCAEMAs are transformed to cationic 2-aminoethyl methacrylate (AEMA) groups, as 2-nitrobenzaldehyde moieties are cleaved. The resulting mixtures of anionic CNC and cationic PDEGMA-rnd-POEGMA-rnd-PAEMA show gelation for sufficiently high polymer fractions upon heating to 60 oC due to the interplay of ionic interactions and LCST. For short heating times the gelation is thermoreversible whereas for long enough heating times irreversible gels can be obtained, indicating importance of kinetic aspects. The ionic nature of the crosslinking is directly shown by adding NaCl, which leads to gel melting. In conclusion, the optical triggering of ionic interaction allows a new way for ionic nanocellulose hydrogel assemblies.