1 April 2015 in Energy Procedia
The development of bioethanol production is being widely discussed both the development of methods and materials used. One of potential raw material for bioethanol production is white sorghum (Sorghum bicolor). It thrives in tropical countries and has fairly high starch content about 65%–71% typically. Thus, it can be used as raw material of bioethanol production. During this process, a simultaneous saccharification and fermentation reaction (SSF) produces more ethanol than conventional processes. The purpose of this study is to determine proper method for producing bioethanol from this raw material by comparing SSF reaction of NaOH-treated white sorghum seeds to untreated sorghum seeds. Beads biocatalyst was prepared by co-immobilization method of glucoamylase by the yeast (Saccharomyces cereviceae) in Na-Alginate 6%. They were varied with variable concentrations of yeast 5%, 7%, 9% and 25%, 35% of glucoamylase enzyme. The biocatalyst is more stable, producing more bioethanol and reducing contamination. The results indicated that white sorghum seeds with 0.1M NaOH treatment produced more bioethanol than untreated sorghum seeds using beads biocatalyst with concentration of yeast 9% and 35% of enzyme. Maximum production of ethanol was 11.48% with the value of Km and Vm are -0.0014g/mL and 0.00245g/mL.hour respectively. By overnight soaking in 0.1M NaOH solution, the purity of the starch in the white sorghum seeds increased
21 June 2017 in IOP Conference Series: Materials Science and Engineering
The Membranes Polymer Gel Electrolyte (MPGEs) based poly (vinylidene fluoride) (PVDF) was prepared by a phase inversion method using polyvinyl pyrrolidone (PVP) as a pore-forming agent and N, N-dimethyl acetamide (DMAc) as a solvent and water as non solvet. The membranes were then soaked in 1 M lithium hexafluorophosphate (LiPF6) in ethylene carbonate (EC) / dimethyl carbonate (DMC) / Diethyl carbonate (DEC) (4:2:4 %vol) solution in order to prepare polymer electrolyte membranes. The MPEGs PVDF/PVP/Nanoclay was applied using central composite design (CCD) experimental design to obtain a quantitative relationship between selected membranes prepared parameters namely (PVDF, PVP as pore forming agent and nanoclay filler concentration) and Ionic conductivity MPEGs. The model was used to find the optimum ionic conductivity from polymer electrolyte membranes. The polymer electrolyte membranes show good ionic conductivity on the order of 6.3 - 8.7 x 10-3 S cm-1 at the ambient temperatures. The ionic conductivity tended to increase with PVP and nanoclay concentration and decrease with PVDF composition. The model predicted the maximum ionic conductivity of 8.47 x 10-3 S cm-1 when the PVDF, PVP and nanoclay concentration were set at 8.01 %, 8.04 % and 10.12%, respectively. The first section in your paper.
1 March 2021 in IOP Conference Series: Materials Science and Engineering
NCA or LiNi0.8Co0.15Al0.05O2 (NCA) Battery is one lithium ion batteries (LIBs) that is often used in electric vehicles as an energy storage device due to its high capacity and energy density. But along with the popularity of electric vehicles, the production of NCA cathode materials has also increased so resulting in accumulation of LIBs waste in the future. The purpose of this study is to recycle NCA via hydrometallurgical route. The effect of reducing agent addition during the pretreatment process was investigated. Stearic acid, oxalic acid, citric acid and glucose were used as the reducing agent. Sulfuric acid and citric acid solution were used as the leaching agent. XRD analysis confirmed the occurrence divalent Ni due to reduction process. Based on the AAS analysis, it can be concluded that the reduction process affects the leaching behavior significantly. The highest leaching concentration of Ni and Co is obtained using glucose as the reducing agent during the pre-treatment.
30 July 2021 in Jurnal Presipitasi : Media Komunikasi dan Pengembangan Teknik Lingkungan
SNShofirul Sholikhatun Nisa
Shofirul Sholikhatun Nisa
+1
Spent nickel catalyst will be harmful to the environment if it is not processed or used properly. In fact, this waste still has a high nickel content. The treatment of spent nickel catalysts has been widely reported, but limited to nickel extraction. Since the lithium-ion batteries demand is continued to increase, then nickel is the most sought-after metal. Consequently, nickel from spent nickel catalysts could be developed as secondary source for lithium-ion battery cathode. This study aims to utilize spent nickel catalysts into more valuable materials. Nickel that has been extracted and mixed with Mn and Co has been used as raw material for nickel-rich cathode, namely NMC. Nickel extraction and NMC synthesis were using the acid leaching method followed by co-precipitation[WI1] [SSN2] . Based on the functional test performed in this work, nickel from spent nickel catalyst can be applied to Li-ion batteries. The sintering temperature that gives good characteristics and electrochemistry was found 820oC. The galvanostatic charge-discharge test gave specific capacity results for NMC of 110.4 mAh/g. The cycle test showed that NMC synthesized from spent nickel catalyst can be carried out up to 50 cycles with a capacity retention of 87.18%.