Controlled low strength material (CLSM), as defined by the American Concrete Institute (ACI) Committee, is a self-flowing cementitious material consisting typically of portland cement, fine aggregates, supplementary cementing materials, and water. In this present experimental study, industrial by-product, namely, ground-granulated blast-furnace slag, is used as a constituent material in CLSM. Mixture proportions were developed for CLSM containing the industrial by-product (GGBS) and were tested in the laboratory for flow and unconfined compressive strength properties. The cardinal aim is to analyze the experimental data generated to formulate a phenomenological model to arrive at the combinations of the ingredients to produce CLSM to meet the desired flow and strength. An independent set of data is generated to examine the validity of the phenomenological approach.
1 February 2019 in Journal of Materials in Civil Engineering
Environmental sustainability is the need of the hour. The dependency on natural river sand has to be decreased, and an environment friendly disposal of waste rubber tires needs to be promoted. The application-specific properties of concrete such as damping or vibration absorbing capacity can be enhanced, by the use of scrap rubber tires as aggregates in concrete. This paper evaluates the feasibility of using shredded waste rubber as a partial replacement to fine aggregate, with respect to mass, by conducting investigations on its mechanical properties. In addition, the effect of polymeric fibers which is incorporated in rubberized concrete is probed. The reuse of waste rubber and fiber resulted in improved ductility and damping ratio; however, it reduced the strength values. At a maximum of 7.5% replacement in both plain rubberized and fiber reinforced rubberized concrete, the loss in strength percentage is within acceptable limits making it suitable for use as vibration attenuators in applications such as road curbs and barriers, paving blocks, trench filling, and machine foundations.
Controlled low strength materials (CLSM), is a self-flowing cementitious backfill material, most suitable for sustainability objectives since it makes use of wastes in large quantities. Wasted gypsum wall boards (drywalls), a construction & demolition waste, are known to pollute atmosphere by releasing harmful H2S gas when dumped at landfills. Use of waste drywalls with flyash, as cement replacement in concrete and CLSM, have resulted in low strength mixes at initial & later ages, respectively. In this paper powdered drywalls with ground granulated blast furnace slag (GGBS), was used as secondary cementitious material along with stone dust as fine aggregates, to produce sustainable CLSM mixtures with varying binder ratios and water contents. Reduction in compressive strength at later ages was not observed for mixes with low water contents, hence use of GGBS instead of flyash with lesser water contents, is effective in resisting detrimental effects of sulfates present in drywalls