In this article, we propose a method for the optimal dimensional synthesis of planar parallel manipulators covering a specified workspace. The proposed method aims to reduce the dimensions of the links, while maximizing the dexterity index over the workspace and it improves the rate of forces transmission and the manipulator stiffness. We study the stiffness of the manipulator through the analysis of deformations based on the finite elements method. The optimization is performed using genetic algorithms, particle swarm optimization and a hybrid method based on the combination of both methods. As study cases, we apply the propose method to the dimensional synthesis of two planar parallel manipulators. Compare to the results obtained analyzing a manipulator with links length within the design space, yet not optimal, the obtained manipulators through the proposed method meet the requirements of workspace while also showing an improved performance in terms of dexterity, forces transmission and stiffness.
10 July 2019 in Journal of Mechanical Science and Technology
The main objective of this study is to apply a dynamic parameter identification methodology to a double-wishbone type front suspension of a race car. Two methodologies for identification are presented: the first one is based on the Singular Value Decomposition (SVD) and elimination by means of the relative standard deviation of each parameter, while the second comprises three consecutive steps: the elimination of those less contributive parameters, the application of SVD method and elimination by relative standard deviation. The physical feasibility of the obtained parameters is taken into account. Both methodologies are validated with collected data of virtual simulation in a computational package program.
In this paper the dimensional synthesis of a spherical four link mechanism that can be used as a solar tracker is presented. With a spherical mechanism it is possible to have a tridimensional movement with one grade of freedom. The dimensional synthesis was based on fi nding the lengths of the components so that the paths required could be traced as close as possible. Diff erent options were analyzed: crank, coupler, rocker and rocker pivot. It was possible to obtain an adjustable coupler for two trajectories within a small error to the application.
En este trabajo se presenta la evaluación de los efectos causados por variaciones de la relación de compresión, el material de la culata y la composición del combustible sobre la velocidad del motor, el consumo de combustible, el tiempo de calentamiento y las emisiones de un motor de encendido por chispa enfriado por aire, bajo una metodología de diseño de experimentos. El objetivo del trabajo ha sido determinar la sensibilidad de las respuestas del motor operando en vacío, así como la combinación óptima entre los parámetros mencionados. De los tres factores evaluados bajo los límites de las pruebas realizadas, la relación de compresión es el factor que ha ejercido la mayor influencia sobre el desempeño del motor bajo el régimen de marcha en vacío. Las temperaturas de estado estacionario del motor bajan con el aumento de la relación de compresión, con la mayor conductividad del material y con el mayor contenido de etanol.