8 March 2022 in ACS Omega
The instability and sealing difficulty confronted by gas drainage boreholes in a soft coal seam weakens the drainage efficiency. To address this problem, the instability characteristics of the sealing section of boreholes are investigated. On the basis of the findings of the mechanical properties of the borehole around the sealing section and in view of the physical and mechanical properties of the soft coal seam, a theoretical analysis was performed. A system consisting of the YYL200 electronic persistent creep test system and the DNS-200 electronic universal tester was used to observe the borehole under different filling conditions. The samples were subjected to a graded loading test, and the Kelvin–Voigt model was selected for parameter inversion and law analysis of the test results. The results show that the collapse of the broken area and the stress concentration and instability of the sealing section after the sealing of the soft coal seam are directly attributable to the instability of the soft coal seam and the sealing difficulty. The mechanical properties of the grouting sealing material are directly related to the loading of the hole-containing sample and dead load displacement. The maximal overall displacement of the sample in group B is close to 1.4 mm. The instantaneous deformation capacity and deformation space reflected by the generalized Kelvin model parameters E1, E2, and η are closely related to the mechanical properties of the filling material. The highly stress- and deformation-resistant sealing material can ensure the relative time-effect-based stability within the stress concentration area of the sealing section.
7 April 2022 in Shock and Vibration
Coal oxidation leads to coal fires prone to coal geohazard accidents. However, studies on carbon oxide gases being indicator gases in predicting spontaneous combustion of coal remain in the initial stage. To better investigate the stage characteristics of generating carbon oxide gases in the low-temperature oxidation process of coal, this study adopts STA-FTIR to experimentally determine the coal weight variation and exothermic condition and the generation law during the low-temperature oxidation process of coal (30–350°C). And, by employing the DFT method, the study determines the chemical reaction and activation energy generated by carbon oxide gases in coal molecules and ascertains the reaction characteristics at different temperatures. The research results indicate that the low-temperature oxidation phase of coal is divided into four main phases, namely, the physical-chemical adsorption phase, the desorption phase, the dynamic equilibrium phase, and the oxidative adsorption phase, each of which has different characteristics for the production of carbon-oxygen compounds, which is important for the prediction of coal spontaneous combustion and the prevention of coal geological disasters.