9 November 2023 in IEEE Photonics Journal
Ambient light interference stands as the primary source of noise encountered by the light detection and ranging (LiDAR) systems based on single-photon avalanche diode (SPAD), which seriously restricts the detection range and accuracy of sensors. Multi-event mode and time-gating method are extensively employed due to their effective suppression ability of the ambient light interference with easily implemented circuit structure. However, the current research on these two operational modes is limited to qualitative description, lacking a comprehensive theoretical analysis. This paper investigates the impact of the multi-event mode and time-gating method on enhancing the imaging capabilities of the sensor, employing a probability distribution perspective. A behavioral model is established, enabling the simulation of the comprehensive functionality of a SPAD-based LiDAR system in either first-hit mode or multi-event mode, including the histogramming, coincident detection, time- gating functions. The model can serve as a substitute for the actual circuit in system function validation and parameter optimization, thereby significantly reducing the design and simulation cycle.
5 April 2010 in Applied Physics Letters
A current-perpendicular-to-the-plane giant magnetoresistance is demonstrated at room temperature by using Co40Fe40B20 alloy with an exchange biased stack of IrMn/CoFeB/Cu/CoFeB. The GMR effect is significantly enhanced by inserting a Co75Fe25 layer between CoFeB and Cu spacer to adjust the interfacial resistance and improve the interfacial asymmetric spin scattering at the interfaces with spacer. Microstructure observation shows that boron of the top CoFeB layer prefers to be enriched at the interface with Ru capping layer after annealing.
8 July 2025 in IEEE Journal of Solid-State Circuits
Edge machine vision requires a vision chip to perform imaging and visual recognition with high speed, high accuracy, and compact size. Current vision chips adopt a two-stage workflow, which uses computer vision processing and a deep neural network (DNN) to perform signal enhancement and recognition, respectively. However, the two stages involve different operations and are separately optimized, which causes degraded recognition accuracy, low inference rate, and huge hardware overhead. To address it, we propose a vision chip that integrates a single-photon avalanche diode (SPAD) image sensor and a reconfigurable spiking neural network (SNN) processor. Inspired by the human visual system that employs a full SNN for signal enhancement and recognition, the vision chip acquires spike-based images and performs an end-to-end SNN embedding image signal enhancement (ISE) for object recognition. The ISE and recognition are trained jointly in a unified deep learning framework to increase recognition accuracy and inference speed. The vision chip only integrates an SNN processor to perform ISE and recognition by being reconfigured into the low-precision multiply-accumulation (MAC) mode or accumulation (ACC) mode, respectively, thereby avoiding a dedicated image signal processor (ISP). Based on a 55-nm CMOS technology, the fabricated vision chip integrates $128{\times }128$ pixels and can implement 4096 ACC/MAC components. The chip was measured to exhibit: 1) a 99.2% accuracy with 10000 inferences/s at 10 lx and 95.3% at 1.43 mlx on the MNIST dataset and 2) a 94.32% accuracy with color mosaic images on the ETH-80 dataset. Our chip maintains a relatively high recognition performance even under an illumination one order of magnitude lower than in prior vision chips.