Haibiao Chen

Haibiao Chen

Auto-generated profile, based on publicly available information

Haibiao Chen

Shanghai Jiao Tong University

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 July 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Songyan NiuSongyan Niu
Songyan Niu
QZQingyu Zhao
Qingyu Zhao
HCHaibiao Chen
Haibiao Chen
SNShuangxia Niu
Shuangxia Niu
LJLinni Jian
Linni Jian
Metal object detection (MOD) is indispensable for wireless electric vehicle charging (WEVC) systems for safety concerns. Most recently, interests are growing in MOD by electromagnetic (EM) sensing. However, current works based on EM sensing rarely target the systems with DD coils, a promising coil type for commercialization. Additionally, EM sensing schemes are mostly derived from a mindset, viz., cooperation between two sensing coils to obtain the voltage difference as a MOD criterion. Hence, undesired out-of-phase incident becomes an inherent problem jeopardizing the success rates of detection. In this article, noncooperative MOD, which solely relies on the voltages of individual sensing coils rather than cooperative ones, is proposed with absolute confidence in detection results. A unique sensing coil array is devised to suit the field characteristics of DD coils perfectly. Size-modulated patch coils are created to eliminate the undetectable zones with proper polarity configuration. Moreover, virtual double-layer sensing coils are constructed to enhance MOD's reliability. Tested by 13 different positions and three types of MOs using a 3.0-kW WEVC prototype, the induced voltages reach at least four times the threshold value. Moreover, the stability of the proposed method is verified successfully no matter the system operates in light-load or heavy-load conditions.

15 December 2022 in Energies
Verified
Journal Article
Open access
PDF file
Songyan NiuSongyan Niu
Songyan Niu
QZQingyu Zhao
Qingyu Zhao
HCHaibiao Chen
Haibiao Chen
HYHang Yu
Hang Yu
SNShuangxia Niu
Shuangxia Niu
LJLinni Jian
Linni Jian
Wireless charging systems (WCSs) are considered very appropriate to recharge underwater surface vehicles (USVs) due to their safe, flexible, and cost-effective characteristics. The small depth of immersion of USVs allows a WCS operated at an mm-level distance using a dock. Resultant tight coupling between the transmitter and receiver is conducive to high power, yet faces a challenge to alleviating misalignment sensitivity. In addition, considering USVs’ endurance, the weight of a WCS should be strictly limited. In this paper, a 6.0 kW underwater WCS is analyzed, designed, and optimized, which achieves a good balance of power capacity, misalignment tolerance, and onboard weight. A multi-receiving-coil structure is employed, which is crucial to large misalignment tolerance. On this basis, two types of coils adapting the hull shape of USV, viz., curved and quasi-curved coils, are devised and compared in case the hydrodynamic performance of USV is degraded. Finally, the weight of receiver is effectively reduced using bar-shaped ferrite without sacrificing the power capacity of WCSs. The results indicate a merely 8.73% drop in coupling coefficient with misalignment ranging from 0 to 100 mm. Moreover, ferrite use is reduced by 40.48 kg compared to a ferrite sheet, which accounts for 50.28% weight of the receiver.

27 March 2023 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Closed access
HCHaibiao Chen
Haibiao Chen
Songyan NiuSongyan Niu
Songyan Niu
ZSZiyun Shao
Ziyun Shao
LJLinni Jian
Linni Jian
In wireless electric vehicle charging systems, misalignments between ground-assembled transmitter and vehicle-assembled receiver are undesirable but inevitable, which may cause efficiency deterioration and even thermal risks. The recognition of horizontal misalignment, including that in the longitudinal and lateral direction, has been made gradual progress by previous works. While yaw angle, with rare attention, can also degrade the charging performance, especially for those employing non-centrosymmetric coupling coils, such as rectangular coils. In this paper, a data-driven strategy based on improved ResNet is proposed to recognize the above multi-type misalignments simultaneously, which is accurate, reliable, and of practical and general value. Large-scale data is sampled using the proposed detection coils by double-group cooperation, which features high sensitivity to the misalignments of all kinds, especially yaw angle. Benefit to the compression technique in the pre-processing phase, the number of training data and labels can be successfully reduced by 3/4. As the core algorithm of the overall strategy, the adaptive channel parameter recalibration ResNet (ACPR-ResNet) can effectively perceive slight differences among similar input samples and map them to proper labels. This is achieved by an adaptive operation of nonlinear transformation and recalibrated importance of channel features during the training process. The effectiveness of the proposed strategy is verified experimentally using a 6.6-kW prototype. Within the 24×24 cm range, 95.2% of the test cases have an error of less than 1.7 cm when recognizing horizontal misalignment, and 91.7% of the test cases have an error of less than 1.5° when recognizing yaw angle.

30 December 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
HCHaibiao Chen
Haibiao Chen
SLShiyuan Li
Shiyuan Li
ZWZe-Ming Wu
Ze-Ming Wu
LWLixiao Wang
Lixiao Wang
LXLi Xiaochun
Li Xiaochun
QLQing Huo Liu
Qing Huo Liu
Pixel antennas expressed in the form of discrete variable’s structure (DVS) demonstrate immense potential in electromagnetic (EM) performance, but the design process relies on a huge full-wave simulation dataset. To efficiently design pixel antennas with high degrees of freedom (DoFs), in this study, a multi-head discrete action calibration proximal policy optimization (MDAC-PPO) reinforcement learning (RL) method is proposed. Specifically, a sophisticated multi-head discrete mechanism is developed to generate the placement status of all metal patches in a probabilistic form. Furthermore, a coupling calibration mechanism that considers local metal density is proposed to break down the intricate optimization target, expediting the iterative process. Additionally, to delve deeper into potential designs that might otherwise be neglected, an exclusive OR (XOR) operation state update manner is integrated into the PPO agent. Three design examples on a pixel antenna with a 2 256 -sized solutions space, including optimization targets on impedance matching, gain, efficiency, and related bandwidth, are presented to show the optimization efficiency and performance of the MDAC-PPO method. The measured |S11| of the fabricated prototypes aligns well with simulations, further validating the reliability of the MDAC-PPO method in practical applications. Meanwhile, this method also provides a new perspective for designing other EM devices with DVS.

8 January 2025 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
ZWZe-Ming Wu
Ze-Ming Wu
ZLZheng Li
Zheng Li
HCHai-Biao Chen
Hai-Biao Chen
LXLi Xiaochun
Li Xiaochun
HZHai-Bing Zhan
Hai-Bing Zhan
KNKen Ning
Ken Ning
This article proposes a microstrip-to-microstrip (MS-to-MS) vertical transition with pixel structures and then proposes a knowledge-assisted proximal policy optimization (PPO), which is a reinforcement learning (RL) for the design of this transition. The transition requires fully connected structures and a novel mechanism to generate the pixel structures with fully connected shape is proposed and incorporated into PPO. The proposed method is compared with the particle swarm optimization (PSO) and the genetic algorithm (GA) and demonstrates benefits in improving design efficiency. The designed MS-to-MS transition is fabricated using the PCB process. Measurement results indicate that the designed MS-to-MS vertical transition operates in the band from 3.4 to 14.8 GHz with low insertion loss.

16 March 2026 in Optics Express
Verified
Journal Article
Closed access
HCHaibiao Chen
Haibiao Chen
RZRui Zhang
Rui Zhang
ZWZeming Wu
Zeming Wu
XLXiaochun Li
Xiaochun Li
QLQing Huo Liu
Qing Huo Liu
Vanadium dioxide-based (VO 2 ) reconfigurable metasurfaces (RM) rely on the precise engineering of meta-atoms to achieve dynamic manipulation of electromagnetic (EM) waves. However, designing these structures inversely is physically challenging due to the complex mapping required to simultaneously coordinate spectral responses across different phase-transition states. To address the scarcity of high-performance designs in dual-state scenarios, we present a Jones matrix theory-guided spectral design framework tailored for VO 2 integrated meta-atoms. By synergizing a conditional variational autoencoder with a generative adversarial network (CVAE-GAN), our approach efficiently utilizes the vast design space to locate structures that satisfy rigorous spectral requirements in both insulating and metallic states. Furthermore, by integrating a novel prescreening mechanism, our method evaluates and optimizes candidate solutions, reducing target deviation by 6.25% and maximizing the fidelity of the generated structures. We numerically validate three representative THz functionalities—switchable polarization conversion, switchable absorbers, and dual-function switchable RMs integrating both—confirming the capability of the method to tailor multi-state optical responses within a unified design process. The proposed framework offers a practical route for the inverse design of RM, particularly in scenarios where multi-state or multi-function spectral targets challenge conventional optimization approaches.