We report experimental observation of narrow-band coherent Cherenkov radiation driven by a subpicosecond electron bunch traveling along the axis of a hollow cylindrical dielectric-lined waveguide. For an appropriate choice of dielectric wall thickness, a short-pulse beam current profile excites only the fundamental mode of the structure, producing energetic pulses in the terahertz range. We present detailed measurements showing a narrow emission spectrum peaked at from a 1 cm long fused silica capillary tube with submillimeter transverse dimensions, closely matching predictions. We demonstrate a 100 GHz shift in the emitted central frequency when the tube wall thickness is changed by . Calibrated measurements of the radiated energy indicate up to per 60 ps pulse for an incident beam charge of 200 pC, corresponding to a peak power of approximately 150 kW.
First measurements of the breakdown threshold in a dielectric subjected to wakefields produced by short (30–330 fs), 28.5 GeV electron bunches have been made. Fused silica tubes of inner diameter were exposed to a range of bunch lengths, allowing surface dielectric fields up to to be generated. The onset of breakdown, detected through light emission from the tube ends, is observed to occur when the peak electric field at the dielectric surface reaches . The correlation of structure damage to beam-induced breakdown is established using an array of postexposure inspection techniques.
30 January 2014 in IEEE Transactions on Electron Devices
We present the first vacuum electronic traveling wave amplifier to incorporate an interaction circuit fabricated by ultraviolet (UV) photolithography and electroforming, demonstrating over 60 W of output power at 214.5 GHz from a 12.1 kV, 118 mA electron beam. The tube also achieved an instantaneous bandwidth of ~15 GHz in G-band in the small signal regime. The all-copper circuit was fabricated in two layers using a UV-transparent polymer monofilament embedded in the photoresist to form the beam tunnel prior to electroforming. Effects arising from fabrication errors and target tolerances are discussed. This microfabrication technique and demonstration paves the way for a new era of vacuum electron devices that could extend into the 1-2 THz range with advances in high-current-density electron guns.
Recent proposals for using plasma wakefield accelerators (PWFA) as a component of a linear collider have included intense electron beams with densities many times in excess of the plasma density. The beam’s electric fields expel the plasma electrons from the beam path to many beam radii in this regime. We analyze here the motion of plasma ions under the beam fields, and find for a proposed PWFA collider scenario that the ions completely collapse inside of the beam. Simulations of ion collapse are presented. Implications of ion motion on the feasibility of the PWFA-based colliders are discussed.
Recent studies of 110 GHz microwave discharges in air at atmospheric pressure have demonstrated formation of a large array of quarter-wavelength-spaced plasma filaments. Here we present measurements showing that as pressure is decreased from atmosphere to a few torr, the discharge transitions from a well-defined array to a smeared-out array and finally to a diffuse plasma. Despite the distinct nature of breakdown phenomena at high microwave frequencies, the pressure dependence of the breakdown threshold field is seen to follow a Paschen-type curve. Data for air and argon at 110 GHz are compared with previous low-frequency data.
23 April 2014 in IEEE Transactions on Electron Devices
The general electromagnetic properties and design methodology for serpentine/folded-waveguide (FW) amplifiers are presented. In addition, hybrid-waveguide circuit topologies, which permit greater design flexibility than the basic serpentine/FW topologies, are also introduced, and their dispersion characteristics are discussed. Experimental validation of design methodology and tools is provided via test results of the recently demonstrated wideband 220-GHz serpentine amplifier, which embodies the design methodology described herein. Particular attention will be paid to the comparison between code prediction and experimental data, which are in excellent agreement.