1 March 2017 in Metrology and Measurement Systems
The spindle rotational accuracy is one of the important issues in a machine tool which affects the surface topography and dimensional accuracy of a workpiece. This paper presents a machine-vision-based approach to radial error measurement of a lathe spindle using a CMOS camera and a PC-based image processing system. In the present work, a precisely machined cylindrical master is mounted on the spindle as a datum surface and variations of its position are captured using the camera for evaluating runout of the spindle. TheCircular Hough Transform(CHT) is used to detect variations of the centre position of the master cylinder during spindle rotation at subpixel level from a sequence of images. Radial error values of the spindle are evaluated using the Fourier series analysis of the centre position of the master cylinder calculated with the least squares curve fitting technique. The experiments have been carried out on a lathe at different operating speeds and the spindle radial error estimation results are presented. The proposed method provides a simpler approach to on-machine estimation of the spindle radial error in machine tools.
1 October 2019 in Journal of King Saud University – Engineering Sciences
1 February 2018 in Engineering Science and Technology, an International Journal
1 February 2016 in SAE International Journal of Advances and Current Practices in Mobility
This paper describes the design methodology and algorithm development towards the design of an automatic external gear-shifting and clutch-actuation system for a sequential gearbox with the aim of providing the drivers with easier and an efficient means of shifting gears. Automatically actuated manual transmission system bridges the gap between automatic and manual transmissions which provides the advantages of both type of transmissions. This would ideally leads to faster shifting time and provide significant benefits in the form of electronic-aids like launch control and traction control. Removal of mechanical clutching would reduce fatigue and lead to ergonomic benefit. Based on the benchmarking performed on an easily available ready-to-install aftermarket alternative, options will be considered for the actuating mechanism and the most feasible will be used to develop a shifting system. A total shift time of about 100ms for upshifts and 150ms for downshifts without acceleration flatlining is the desired output. The developed system should be usable on any similar engine with a sequential gearbox by making small modifications to the GCU code and actuator force. The system could also be used in autocross vehicles for reduced gear-shift times and increased driver concentration, leading to better lap-times.
1 January 2018 in Materials Today: Proceedings