Kan Zha

Kan Zha

Auto-generated profile, based on publicly available information

Kan Zha

Sandia National Laboratories

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2014 in International Journal of Engine Research
Verified
Journal Article
Closed access
SBStephen Busch
Stephen Busch
KZKan Zha
Kan Zha
PMPaul C Miles
Paul C Miles
Various pilot–main injection strategies are investigated in a single-cylinder optical Diesel engine. It is observed that as the dwell between a single pilot and the main injection is decreased toward zero, combustion noise passes through a minimum, and a reduction of 3 dB is possible. The injection schedules employed in the engine are analyzed with a hydraulic injection analyzer to provide rate shapes for each of the dwells tested. Two distinct injection events are observed even at the shortest dwell tested, and various rate shaping effects are observed with the main injection event as the dwell is adjusted. High-speed elastic scattering imaging of liquid fuel is performed in the engine to examine initial spray penetration rates. These compare favorably to the measured rates of injection, thus providing evidence that rate shaping of the initial phase of the main injection occurs in the engine and that this rate shaping is consistent with the injection rate data. However, experimental evidence suggests that these changes are not responsible for the observed trend in combustion noise as dwell changes. The combination of thermodynamic data and rate of injection data supports the theory that the main injection interacts with the pilot mixture field and influences its heat release process, thus playing a role in decreasing combustion noise. The relative phasing of the pilot and main heat release may play a significant role in reducing combustion noise; further studies will focus on combustion phasing effects.

14 April 2015 in SAE International Journal of Engines
Verified
Journal Article
Closed access
PDF file
SBStephen Busch
Stephen Busch
KZKan Zha
Kan Zha
PMPaul C. Miles
Paul C. Miles
AWAlok Warey
Alok Warey
FPFrancesco Pesce
Francesco Pesce
AVAlberto Vassallo
Alberto Vassallo
A pilot-main injection strategy is investigated for a part-load operating point in a single cylinder optical Diesel engine. As the energizing dwell between the pilot and main injections decreases below 200 μs, combustion noise reaches a minimum and a reduction of 3 dB is possible. This decrease in combustion noise is achieved without increased pollutant emissions. Injection schedules employed in the engine are analyzed with an injection analyzer to provide injection rates for each dwell tested. Two distinct injection events are observed even at the shortest dwell tested; rate shaping of the main injection occurs as the dwell is adjusted. High-speed elastic scattering imaging of liquid fuel is performed in the engine to examine initial liquid penetration rates. The penetration rate data provide evidence that rate shaping of the initial phase of the main injection is occurring in the engine and that this rate shaping is largely consistent with the injection rate data, but the results demonstrate that these changes are not responsible for the observed trend in combustion noise.A zero-dimensional model is created to investigate the causes of the observed combustion noise behavior. The trend in simulated combustion noise values agree well with the experimentally determined trend, which is associated with two main factors: relative changes in combustion phasing of the pilot and main heat release events and suppression of the pilot apparent heat release for dwell times near the minimum-noise dwell. Two possible mechanisms by which the relative phasing between the pilot and the main heat release events impacts combustion noise are proposed.

14 April 2015 in SAE International Journal of Engines
Verified
Journal Article
Closed access
PDF file
KZKan Zha
Kan Zha
SBStephen Busch
Stephen Busch
PMPaul C. Miles
Paul C. Miles
SWSameera Wijeyakulasuriya
Sameera Wijeyakulasuriya
SMSaurav Mitra
Saurav Mitra
PSP. K. Senecal
P. K. Senecal
Flow field asymmetry can lead to an asymmetric mixture preparation in Diesel engines. To understand the evolution of this asymmetry, it is necessary to characterize the in-cylinder flow over the full compression stroke. Moreover, since bowl-in-piston cylinder geometries can substantially impact the in-cylinder flow, characterization of these flows requires the use of geometrically correct pistons. In this work, the flow has been visualized via a transparent piston top with a realistic bowl geometry, which causes severe experimental difficulties due to the spatial and temporal variation of the optical distortion. An advanced optical distortion correction method is described to allow reliable particle image velocimetry (PIV) measurements through the full compression stroke.Based on the ensemble-averaged velocity results, flow asymmetry characterized by the swirl center offset and the associated tilting of the vortex axis is quantified. The observed vertical tilting of swirl center axis is similar for tested swirl ratios (2.2 and 3.5), indicating that the details of the intake flows are not of primary importance to the late-compression mean flow asymmetry. Instead, the geometry of the piston pip likely impacts the flow asymmetry.The PIV results also confirm the numerically simulated flow asymmetry in the early and late compression stroke: at BDC, the swirl center is located closer to the exhaust valves for swirl-planes farther away from the fire deck; near TDC, the swirl center is located closer to the intake valves for swirl-planes farther away from the fire deck. It is evident from experimentally determined velocity fields that the transition between these two asymmetries has a different path for various swirl ratios, suggesting the influence of intake port flows.

16 April 2012 in SAE International Journal of Fuels and Lubricants
Verified
Journal Article
Closed access
PDF file
XYXin Yu
Xin Yu
KZKan Zha
Kan Zha
RFRadu Florea
Radu Florea
MJMarcis Jansons
Marcis Jansons
Due to the single fuel concept implemented by the US military, the soot production of diesel engines fueled with JP-8 has important implications for military vehicle visual signature and survivability. This work compares in-cylinder soot formation and oxidation of JP-8 and ULSD in a small-bore, optical diesel engine. Experimental engine-out soot emission measurements are compared to crank-angle resolved two-color measurements of soot temperature and optical thickness, KL. A 3-D chemical kinetic-coupled CFD model with line of sight integration is employed in order to investigate the soot distribution in a 2-D projection associated with the imaging plane, as well as to aid in interpreting the third dimension along the optical depth which is not available within the experimental work. The study also examines the effect of volatility on soot emission characteristics by CFD simulation.With the same injection pressure and timing for both fuels considered, heat release analysis shows JP-8 has more energy release than ULSD, however two color measurements indicate JP-8 produces less in-cylinder soot throughout the cycle as well as lower engine out measurements compared to ULSD. Furthermore, JP-8 is found to have a lower soot temperature and less high temperature areas than ULSD. A line of sight integration technique is applied to the CFD (Reaction Design FORTE) output to compare the simulation results with experimental high speed images. The model has good agreement with the experimental results, as does the predicted soot temperature and KL factor with the two color experimental measurements. However, interpretation of the two-color line of sight images obtained from the CFD simulation indicated that the measurement of the KL factor will be affected by the amount of radiation intensity available to a camera characterized by a finite dynamic range. Finally, the effect of fuel volatility is investigated using the CFD model by varying fuel evaporation properties. It is observed that the high volatility fuels, such as JP-8, exhibit lower engine out soot emissions due to better fuel mixing and increased local equivalence ratio homogeneity.

16 April 2012 in SAE International Journal of Engines
Verified
Journal Article
Closed access
PDF file
RFRadu Florea
Radu Florea
KZKan Zha
Kan Zha
XYXin Yu
Xin Yu
MJMarcis Jansons
Marcis Jansons
DTDinu Taraza
Dinu Taraza
NHNaeim Henein
Naeim Henein
As a result of recent focus on the control of Low Temperature Combustion (LTC) modes, dual-fuel combustion strategies such as Reactivity Controlled Compression Ignition (RCCI) have been developed. Reactivity stratification of the auto-igniting mixture is thought to be responsible for the increase in allowable engine load compared to other LTC combustion modes such as Homogenous Charge Compression Ignition (HCCI). The current study investigates the effect of ethanol intake fuel injection on in-cylinder formaldehyde formation and stratification within an optically accessible engine operated with n-heptane direct injection using optical measurements and zero-dimensional chemical kinetic models. Images obtained by Planar Laser Induced Fluorescence (PLIF) of formaldehyde using the third harmonic of a pulsed Nd:YAG laser indicate an increase in formaldehyde heterogeneity as measured by the fluorescence signal standard deviation. The experimental observations are complemented by a discussion regarding definitions of “reactivity”.

14 April 2015 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
FPFederico Perini
Federico Perini
KZKan Zha
Kan Zha
SBStephen Busch
Stephen Busch
PMPaul Miles
Paul Miles
RRRolf D. Reitz
Rolf D. Reitz
In this work computational and experimental approaches are combined to characterize in-cylinder flow structures and local flow field properties during operation of the Sandia 1.9L light-duty optical Diesel engine. A full computational model of the single-cylinder research engine was used that considers the complete intake and exhaust runners and plenums, as well as the adjustable throttling devices used in the experiments to obtain different swirl ratios. The in-cylinder flow predictions were validated against an extensive set of planar PIV measurements at different vertical locations in the combustion chamber for different swirl ratio configurations. Principal Component Analysis was used to characterize precession, tilting and eccentricity, and regional averages of the in-cylinder turbulence properties in the squish region and the piston bowl. Complete sweeps of the port throttle configurations were run to study their effects on the flow structure, together with their correlation with the swirl ratio. Significant deviations between the flows in the piston bowl and squish regions were observed. Piston bowl design, more than the swirl ratio, was identified to foster flow homogeneity between these two regions. Also, analysis of the port-induced flow showed that port geometry, more than different intake port mass flow ratios, can improve turbulence levels in-cylinder.