The synchrosqueezing generalized S-transform (SSGST) is commonly used to generate an isofrequency component of a signal by squeezing the decomposed frequency components of the signal. However, for seismic signals, the single-trace process can have a lack of lateral information in the squeezed results and lead to some discontinuous geologic information that will mislead the interpreter. Thus, to improve the stability of SSGST, we have developed a multichannel seismic trace squeezing method. Multichannel SSGST (MSSGST) considers the decomposed frequency components of neighboring traces of the analysis seismic trace and then reconstructs the center trace. Therefore, compared with SSGST, the multichannel processing improves the stability of the squeezing and produces more laterally continuous results that properly follow the geologic phenomenon. The effectiveness of MSSGST is validated using various field data. We use the application to demonstrate the potential of multichannel squeezing to perform well at (1) improving the energy focusing and continuity of the decomposed frequency components, (2) depicting the boundaries of geologic structures, and (3) identifying the thin layers.
Sparse representation (SR)-based denoising method attenuates random seismic noise trace-by-trace, which may not be able to employ the coherency between neighboring traces. To address this, we propose a multiple measurement vector (MMV)-based algorithm for robust denoising of multichannel seismic gathers. Seismic reflectors in common offset gather (COG) is characterized by horizontal events, which satisfy the common sparsity assumption, making it ideal for the MMV approach. ℓ2,1-norm regularization, which enforces two constraints on source matrix, i.e., temporal sparsity and the horizontal continuity, is then adopted in the MMV model to stabilize the lateral variation between channels. Besides, ℓ2,1-norm regularization provides a reasonable intrinsic structure to reduce the multisolution of the algorithm. Celebrating the strengths of iteratively reweighted (IR), we present a novel MMV algorithm, IR ℓ 2,1 norm minimization (IR-ℓ2,1), that further improves the performance. The formulated IR-ℓ2,1 can be minimized by the alternating direction method of multipliers. Both synthetic and field data applications confirm the effectiveness of the proposed denoising method.
10 January 2024 in IEEE Transactions on Geoscience and Remote Sensing
Seismic resolution is a key indicator in seismic exploration technology and directly affects the reliability of seismic data interpretation. Seismic wavelet extraction plays a vital role in high-resolution seismic processing. Traditional seismic wavelet extraction methods, such as autocorrelation and homomorphic deconvolution, are limited to the minimum phase assumption. The wavelet extraction method that combines multitrace statistical wavelet extraction and logging data requires the reflection coefficients and wavelets of adjacent traces to be consistent. In view of these limitations, this study proposes a wavelet joint extraction method based on seismic velocity and acceleration signals. This method does not require assumptions regarding the phase of the wavelet, and an acceleration signal is introduced to avoid an excessive gap between adjacent traces. Independent component analysis (ICA) was used to reduce the influence of noise on the higher order cumulants. This method first performs ICA on the velocity and acceleration signals to obtain the preprocessed data and the corresponding high-order cumulants. The amplitude and phase spectra of the wavelet were then reconstructed using the amplitude and phase spectra of the high-order cumulant. Finally, a seismic wavelet was reconstructed based on the obtained amplitude and phase spectra. The theoretical model and actual seismic data were processed using the proposed method. The test results show that this method can extract a more accurate seismic wavelet and has feasibility and application potential for improving the resolution of seismic data.
Lithium is an important mineral resource and a critical element in the production of lithium batteries, which are currently in high demand. Oilfield brine has significant value as a raw material for lithium extraction. However, it is often considered a byproduct of oil and gas production and is either abandoned or reinjected underground. Exploration and development of oilfield brines can enhance the economic benefits of oilfields and avoid wasting resources. Current methods for predicting brine distribution rely on geological genetic analysis, which results in low accuracy and reliability. To address this issue, we propose a workflow for lithium brine prediction that uses seismic and logging data. We introduced waveform clustering control and used the mapping relationship between seismic waveforms and well-logging curves to predict high-quality reservoirs based on the electrical and physical properties of lithium brine reservoirs. In this workflow, the seismic waveforms were first clustered using singular value decomposition. The sample sets of well-logging properties were established for the target location. The target properties were divided into high- and low-frequency components and predicted separately. The predicted results of the high-quality reservoirs in the study area were verified using elemental content test results to demonstrate the effectiveness of the method. Our study indicates that well-logging property prediction constrained by waveform clustering can predict lithium brines in a carbonate reservoir.