21 August 2024 in Eastern-European Journal of Enterprise Technologies
The object of this paper is a helical blade in a shredding drum from a sweep surface. Such drums are used in harvesters for crushing plant mass. If the flat blades are installed on the drum, cutting of the plant mass occurs simultaneously along the entire length of the blade. This could cause a pulsating dynamic load. If a flat knife with a straight blade is installed at an angle to the axis of the drum, then the distances from it to the points of the blade will be different, as well as the cutting conditions along the blade. The elliptical shape enables the same distance from the axis of rotation to the points of the blade, but this does not solve the problem. Many short flat knives with a straight blade can be mounted on the drum, placing them in such a way that the time between the individual knives is minimized. However, all these disadvantages can be eliminated by a helical knife with a blade in the form of a helical line. The design of a helical knife from an unfolding helicoid has been considered. In differential geometry, the bending of unfolded surfaces of zero thickness is considered. Bending of the workpiece into a finished product occurs with minimal plastic deformations, the magnitude of which depends on the thickness of the workpiece sheet. The methods of differential geometry of unfolding surfaces were applied to the analytical description of the surface of the helical knife. The parametric equations of the unfolding helicoid were derived according to the given structural parameters of the knife in space and on the plane. That has made it possible to mathematically describe the contour lines that cut the knife from the surface and on its sweep. Formulae for calculating a flat workpiece through the structural parameters of the knife have been derived. Thus, with the specified structural parameters of the knife R=0.25 m, τ=20°, φ=65°, according to the resulting formula, we find the radius of the knife blade on a flat workpiece: R0=4.8 m.
16 June 2021 in Modern problems of modeling
NINational Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute»
National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute»
Computer study of processes of various nature requires the creation of a mathematical model of a natural experiment. The study process is greatly simplified when there is a visual component of such a process. The difficulty of developing a general mathematical model for the propagation of electromagnetic waves is associated with the dependence of the process on the medium. For example, in an aqueous environment, they are transmitted weaker than in an air environment, which makes their use in transmitting waves between objects in different environments inconvenient. Existing approaches to simulation of acoustic signal are considered in the work. Such methods include models of hydrodynamics in combination with Maxwell's equations, oscillating electrical circuits, methods for modeling the process of propagation and attenuation of sound under water, and others. The theoretical basis for constructing algorithms for modeling the propagation of acoustic oscillations in the marine environment is considered. Mathematical and traditimic models of acoustic oscillations are based on preliminary tests and take into account the computer capabilities of technology. This constraint imposes additional conditions and complicates the mathematical model being created. The methods in question do not create mathematical models of the propagation and attenuation of sound signals, taking into account such user conditions as: variable speed of sound, geometry and bottom profile, surface state, medium temperature. Thus, there is a need to develop a methodology for modeling hydroacoustic signal components that describe the generation of signals and adapt to the task. The analysis indicates the feasibility of using the methods of beam theory and the parabolic equation to describe a model for which the depth is variable. Keywords: mathematical modeling, acoustic waves, wave equation, hydroacoustics, Helmholtz equation, beam method, normal modes, parabolic equation.
24 May 2021 in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
During the intensive development of information systems, the volumes of data necessary for storing and processing information, in particular graphic images, grow. One of the reasons for this phenomenon is the desire to continually improve the quality of the content we receive. The ever-growing demand for image quality requires the development of new and improvement of existing approaches to information compression. Compression algorithms use the presence of so-called surplus in the data, which can be eliminated during data storage and restored during playback. Currently in demand methods are based on storing only low-frequency components. Such methods are used in JPEG, MPEG compression algorithms. The disadvantage of such algorithms is not a large compression ratio. In this regard, methods have emerged based on fractal data compression. The main idea of the method is to store the image as affine transformations, which leads to its compression. The paper proposes preliminary processing of graphic data for storing them in the form of a file with the * .json extension. The application of a further fractal compression algorithm to the already obtained file allows to reduce the processing time of data, computational calculations. The resulting file will have the advantages of fractal compression such as decompression speed, better compression ratio and higher resolution compared to * .jpeg and * .bmp. Despite all the advantages, fractal compression of graphic information is used quite rarely. This is due to the complexity of the algorithm, the lack of a sufficient number of specialists on this issue and the estimate of the licensed software. The improvement is aimed at simplifying the algorithm and its implementation will avoid these drawbacks and expand the scope of fractal compression.