This experimental investigation aims to formulate quadratic regression based empirical model taking into account the parameters of friction stir welding (FSW) process for predicting the optimized process parameters to maximize the response (i.e., ultimate tensile strength) of the distinctive alloys of Mg joints. Parameters of FSW process taken into consideration includes tool’s traverse speed, axial force and rotational speed of tool and response being the fabricated joint’s tensile strength. A central composite rotatable category 3–factor, 5 level design based matrix was formulated and response surface methodology was used to obtain regression based models, to generate contour plots and to visualize the interactive impacts of parameters on the joint’s tensile strength. Formulated quadratic regression based model was validated employing analysis of variance. Comparison amidst the realistic and anticipated values of the response announced the superior fitting accuracy of the formulated quadratic model. For a constant tool’s rotational speed (of 1000 rpm to 1250 rpm), the tensile strength was observed to be highly sensitive to the axial force values than the tool traverse speed values. Mean tensile strength of the friction stir welded AZ31B, AZ80A, AZ91C, AM50A and ZK51A-T5 Mg joints during the employment of optimized process parameters were found to be 217.5 MPa, 251.4 MPa, 231.9 MPa, 192.1 MPa and 173.2 MPa respectively, thereby exhibiting perfect agreement with the anticipated values.
12 September 2024 in Journal of Materials Engineering and Performance
An endeavour was put forward to friction stir weld flat plates of AZ80A Mg alloy by employing the central composite based design technique of response surface methodology, taking into consideration the parameters namely tool rotational speed, traverse speed, tool’s tilt angle, and pin geometry of the employed tool. Numerical model was formulated to correlate the relationship amidst the employed parameters of FSW process and the responses, namely tensile strength and elongation percentage of the AZ80A Mg alloy joints. The formulated model was also optimized to attain AZ80A Mg alloy joints possessing highest value of tensile strength. Competency of the formulated numerical model was validated employing the analysis of variance and the observations of the affirmation experiments plotted in the form of scatter diagrams revealed an appreciable agreement with the values of the anticipated models. Response and contour plots generated from the established numerical model was employed to understand the interactive impacts of the parameters of FSW process on the variables of the response. AZ80A mg alloy joints fabricated during the employment of tool possessing straight cylindrical geometry at atilt angle of 0.630, rotational speed of 962.077 rpm, tool traverse speed of 2.105 mm sec−1 possessed the highest tensile strength of 195.299 MPa and was proven to be free from flaws.
The development of high-strength alloys, such as nonferrous alloys, has been driven by advancements in metallurgy and the increasing demand for robust materials across various industries. These alloys, however, pose significant challenges when machined using traditional methods. Conventional machining often leads to damage of both the workpiece and the tool due to the physical removal of material using a sharp cutting tool. In contrast, Non-Traditional Machining (NTM) processes remove material through the application of thermal, chemical, or electrical energy, or a combination of these energies, making them better suited for hard and brittle materials. Among the non-traditional techniques, Abrasive Water Jet Machining (AWJM) stands out for its flexibility and precise control over process parameters. This study employs a combination of experimental observations, multiple regression modeling, and Regression Neural Networks (RNN) to optimize AWJM process parameters for machining Aluminium 6061 alloy, Copper-Iron alloy, and Lead-Tin alloy. The findings indicate that the G method effectively determines the optimal AWJM process settings for these alloys.
This study investigates the mechanical and Viscoelastic properties of glass fibre reinforced polymer (GFRP) composites, focusing on improvements in performance due to the incorporation of glass fibres. The GFRP composites were fabricated using E-glass fibres embedded in an SC-15 epoxy resin matrix. Tensile, flexural, and dynamic mechanical analysis (DMA) tests were conducted to characterize the properties of the composites. The results showed a 30% increase in tensile strength and a 25% improvement in elastic modulus compared to neat epoxy resin. The tensile strength of the GFRP composite was found to be 489 MPa, while the modulus of elasticity increased to 24.5 GPa. In flexural testing, the GFRP composites exhibited a 20% increase in flexural strength, reaching 600 MPa, and a 15% improvement in flexural modulus, measured at 22 GPa. Additionally, the dynamic mechanical analysis demonstrated a 40% increase in storage modulus, with the composites maintaining stiffness across a temperature range from 30°C to 180°C. The glass transition temperature (Tg) increased by 10°C, indicating improved thermal stability. These enhancements are attributed to the effective load transfer between the glass fibres and the epoxy matrix, as well as improved fibre-matrix adhesion due to silane surface treatment. This study provides critical insights into the mechanical behaviour and thermal stability of GFRP composites, underscoring their potential for high-performance structural applications, including aerospace and marine engineering.