Este trabalho teve como objetivo usar técnicas dendrocronológicas para recuperar o crescimento diamétrico e a idade média de espécies arbóreas estabelecidas sob um povoamento de Araucaria angustifolia implantado em 1949 na Floresta Nacional de Irati, Paraná. Foram amostradas 30 árvores da espécie regenerante Araucaria angustifolia, 24 da espécie regenerante Cedrela fissilis, 24 da espécie regenerante Clethra scabra, 22 da espécie regenerante Ilex paraguariensis e 18 da espécie regenerante Ocotea puberula. O modelo de Chapman-Richards foi utilizado para descrever as curvas de crescimento em diâmetro por espécie, construindo-se curvas de incremento médio anual (IMA) e incremento corrente anual (ICA). As espécies estudadas apresentaram grande potencial para estudos dendrocronológicos e o uso dessa técnica permitiu determinar que a regeneração natural iniciou-se em 1958 e que tinha, em média, 34 anos. A técnica possibilitou também recompor o crescimento em diâmetro por espécie, gerando taxas de crescimento anuais, com as quais se identificaram os anos característicos de alto e baixo crescimento.
Este trabalho teve como objetivo desenvolver modelos de crescimento e produção em classes de diâmetro para plantios de Eucalyptus grandis submetidos a desbastes. Os dados utilizados na modelagem foram provenientes de plantios de Eucalyptus grandis localizados no Município de Telêmaco Borba, Estado do Paraná, e oriundos de parcelas permanentes, temporárias e de inventário pré-corte, com idades variando de 2,5 a 26,5 anos. A função de densidade de probabilidade Weibull foi utilizada para gerar a distribuição diamétrica. O processo de modelagem de atributos do povoamento foi dividido em etapas, considerando-se os estágios de desenvolvimento do povoamento. Dessa maneira, dois sistemas de prognose foram gerados para predizer os atributos na idade do primeiro desbaste, segundo desbaste ou para o corte final. Os atributos modelados foram aqueles necessários para recuperação dos parâmetros da função Weibull nas idades de intervenção pelo método dos momentos. Para avaliação das prognoses, utilizaram-se o teste de aderência de Kolmogorov-Smirnov e o teste de identidade L&O proposto por Leite e Oliveira (2002). Os dois sistemas de prognose apresentaram boas estimativas de ajuste e precisão. A metodologia empregada possibilitou simular o crescimento e produção em plantios de Eucalyptus grandis ao longo da rotação, gerando resultados adequados, principalmente, para o corte final, quando são colhidas as melhores árvores com maiores valores agregados.
Pinus forests have been implanted in the South of Brazil since the 1960s in different spacing and harvested in shorter terms to increase wood yield. Reducing the rotation period and changing the spacing of forest plantations can influence the wood’s physical and mechanical properties, as they are younger trees that do not yet have a significant amount of mature wood in their composition. In this context, this research aimed to study the influence of three levels of planting spacing (3.0 × 2.0 m, 4.0 × 2.0 m, and 2.0 × 2.0 m) and two ages (13 and 15 years old) on growth characteristics and physical-mechanical properties of wood, as well as the relationship between them. Apparent density, latewood percentage, rings per inch, strength and stiffness in static bending as well as compression parallel to the grain, and shear strength were evaluated. The evaluated planting spacings did not cause statistically significant changes in the mechanical properties of juvenile Pinus taeda L. wood. The studied ages did not influence the wood’s apparent density. However, changing the cutting age from 13 to 15 years significantly increased the strength and stiffness of the wood. There was a statistically significant correlation between tree growth characteristics and strength, and stiffness in bending and parallel compression, around 0.500 R2, which suggests that this parameter can be used to assist in estimating those properties. The wood of Pinus taeda L used in this study can be classified as structural wood, class C20 for 13 years-old trees and classes C25 and C30 for 15 years-old trees, according to NBR 7190/97 requirements.
This study proposed to generate information related to the abundance and the structural characteristics of hollows at the tree and species levels in an area of managed forest in the Amazon. A database was used that was composed of 29,899 trees from thirty-eight species that were inventoried, harvested, and measured in ten annual production units that were managed between 2008 and 2017 in the Tapajós National Forest, state of Pará, Brazil. The data was tabulated and reported in absolute and percentage values. Contingency tables were created to identify patterns of occurrence of hollows in commercial stems. A total of 24% of the harvested trees had hollows in at least one section of the commercial stem, and species had different propensities for hollow occurrence. It was found that the larger the tree diameter the greater the possibility for occurrence of hollows, and these hollows were proportionally larger. Most of the hollows in harvested trees were small. Patterns of occurrence in commercial stem hollows were observed, and these were dependent on tree species and size. Most trees had hollows distributed along the entire stem or only at the base of the stem. Study Implications: The presence of hollows in managed native forest trees in the Amazon depends on the species, and trees with larger diameters have a greater probability of having hollows. Furthermore, trees with larger diameters have hollows that have larger diameters, lengths, and volumes. Commercial trees have different patterns of hollows along the stem, and these patterns are dependent on tree species and size. The results of this study will contribute to management of trees with hollows in the Amazon Forest as well as to serve as a base for future studies related to this theme.