27 September 2017 in Optics Letters
A tunable coffee-ring effect (CRE) that enables the patterned deposition of nanoparticles (NPs) is obtained on a designed superhydrophilic and superhydrophobic composite surface of a titanium substrate. Low-adhesion superhydrophobic surfaces with picosecond laser-induced periodic surface structure and micro–nano hierarchical structure are investigated. The NPs are not only deposited in a small area of , which is 265.56 times smaller than that of the original hydrophilic surface, but also in various patterns such as triangular, rectangular, and ecliptical besides the traditional circular shape. This controllable morphology of the CRE indicates a maneuvering capability of NPs in their common preservation form of suspension turbid liquid, even when the solution concentration reaches 1 mg/mL, which is promising for NP-printed circuit boards and site-specific delivery drugs.
7 January 2019 in Surface Engineering
Superhydrophobic (SH) surface has been found effective for drag reduction in wall-bounded turbulence for decades, especially the metallic durable SH surfaces are believed very promising for improving the velocity and voyage of marine vehicles. We present stainless steel SH surfaces with U-groove patterns that fabricated by ultraviolet laser texturing and coating modifier treatment. The drag-reducing effects of the SH surfaces are tested by a self-built gravity sliding speed improving evaluation device. The results show that the different drag-reduction performance of the SH surfaces can be achieved by adjusting the line spacing of the crossing U-groove patterns. With the line spacing equalling to 80 μm, the ultraviolet laser textured stainless steel SH surface acquires the static contact angle of 161.5° and the dynamic sliding angle of only 2°, which leads to the maximum speed improving rate of 29.7%.