Waste incineration is a crucial component of waste management as it is the final stage of circular utilization and the initial phase of disposal. Effective waste management prioritizes energy recovery from waste and substantial waste volume reduction while committing to minimizing air pollutant emissions, particularly nitrogen oxides (NOx). This study involves an in-depth analysis of operational data from 44 incineration facilities in South Korea spanning 5 years, supplemented by empirical measurements from 14 sites. This study aimed to assess three key aspects of these incineration facilities: (1) waste volume reduction characteristics, (2) energy recovery capabilities, and (3) NOx emission reduction performance. We examined how these elements interact within the policy framework governing incinerator management in South Korea. Quantitatively, incinerating 100 tons of municipal waste resulted in a gain of 338.7 m3 in landfill capacity and recovery of 637.5 GJ of energy in the form of heat or electricity. Notably, South Korean incineration facilities significantly extend the lifespan of landfill sites, aligning closely with the objectives of the South Korean Ministry of Environment’s “No More Direct Landfilling of Household Waste Policy”. This positive outcome is further reinforced by the “Incineration Tax Reduction Policy”, which incentivizes active efforts toward energy recovery during incineration. Our study provides decision-makers with valuable insights for achieving a harmonious equilibrium between environmental sustainability and resource utilization, thereby contributing to the continuous improvement of policies aimed at South Korea’s vision of achieving a circular economy.
11 February 2017 in Journal of Material Cycles and Waste Management
Solid Refuse Fuel (SRF) manufacturing facilities process 4.72 million tons of waste annually. The residues generated after manufacturing SRF products account for 35–40% of the input waste, and most of them are finally disposed of in landfills. The process flow and management status of SRF manufacturing facilities were investigated, and the residues generated from SRF manufacturing facilities using municipaland industrial waste, respectively, were separated by particle size. The appropriate separation conditions for the residues according to the characteristics of the input raw materials were presented through the analysis of loss on ignition (LOI), organic foreign substance content, heating value, and carbon content. Based on this, the appropriate management criteria (draft) for the subsequent treatment of final residues were derived to improve recyclability. Residues generated in the SRF manufacturing process need to be additionally separated into combustibles and incombustibles through cylindrical rotary separating devices before subsequent the final disposal process.
The landfill mining and reclamation (LFMR) project is increasingly recognized as crucial for achieving sustainable waste management and supporting global environmental goals, such as the United Nations Sustainable Development Goals related to clean energy, responsible consumption, and sustainable cities. This study evaluated the potential of combustible polymer composites (CPCs) derived from landfill mining waste for energy recovery and chemical recycling as well as resource recovery potential of soil-like fractions (SLFs). Through physico-chemical analysis and pyrolysis reaction with catalytic upgrading process, the study evaluates the suitability of CPCs for energy recovery as a solid recovered fuel (SRF) and chemical recycling feedstock. For assessing the SLFs for potential use as recycled aggregates and cover materials, total organic carbon, heavy metal concentration, and biodegradability were investigated. CPCs exhibited varied SRF and chemical feedstock qualities depending on site-specific polymer composition, while SLFs met environmental criteria for both inert waste and stabilization soil classification. The findings not only highlight technical feasibility, but also provide a transferable evaluation framework supporting ‘circular economy’ policies. Therefore, LFMR projects can contribute to sustainable waste management and energy production and provide solutions for effective material recycling, aligning with global environmental and resource conservation goals.
18 November 2020 in Waste Management & Research: The Journal for a Sustainable Circular Economy
Korea’s Ministry of Environment has implemented the Framework Act on Resource Recirculation to activate waste resource recovery. However, industrial waste treatment facilities have some problems related to diversity of waste received for proper management of wastes. Waste incineration facilities are required to receive and process combustible waste and are forbidden to re-consign waste to other waste treatment facilities without any processing. In reality, a large amount of incombustibles is injected into the incinerator because it is impossible to completely separate the incombustible materials. Therefore, it is necessary to develop additional management criteria for optimal operation of the incineration facility. This study was conducted to improve institutional management of incineration facilities in Korea. Through a literature review and statistics study, incombustible waste management trends were investigated. The characteristics of waste entering incineration facilities were surveyed. Physical composition and proximate analysis of incoming waste were conducted, and properties of the incombustibles mixed in feedstocks to waste incineration facilities were examined. As a result of this study, incombustibles mainly consisting of the construction and demolition waste, such as soil, glass, and metals, should be separated from feed sent to incinerators. A mechanical screening technique that sorts particles of 30–40 mm in size can be used to separate the incombustibles. Also, management criteria could be proposed to sort and re-consign the incombustibles.