Among the most selective catalytic systems for the hydroisomerization of C16+n-paraffins, catalytic systems based on SAPO-11 are quite promising. In order to increase the activity and selectivity of these bifunctional catalysts, it is necessary to reduce the diffusion restrictions for the reacting molecules and their products in the microporous structure of SAPO-11 by reducing the crystal size. To solve this problem, we have studied the influence of different templates (diethylamine, dipropylamine, diisopropylamine, and dibutylamine) on the physicochemical properties of reaction gels and SAPO-11 silicoaluminophosphates during their crystallization. Using XRD, SEM, and NMR techniques, we found that regardless of the template used, the reaction gel after the aging process at 90 °C is an AlPO4·2H2O hydroaluminophosphate. At the same time, the nature of the template affects the morphology and crystal sizes of the intermediate alumophosphate, AlPO4·2H2O, and the molecular sieves, SAPO-11. The acidic properties and the porous structure characteristics of SAPO-11 are also affected by the template. A template was proposed to enable the synthesis of nanoscale SAPO-11 crystals. The influence of the morphology and crystal size of SAPO-11 on the catalytic properties of a bifunctional catalyst based on SAPO-11 in the hydroisomerization of hexadecane was investigated.
The formation of the initial reaction gels using boehmite and Al isopropoxide, as well as their subsequent crystallization into AlPO4-11 molecular sieves, were studied by XRD, IR and Raman spectroscopy, SEM, TEM, and N2 adsorption-desorption methods. It was shown that the reactivity of the aluminum source significantly affects the chemical and phase compositions of the initial gels. The influence of the properties of the reaction gels on the phase composition of the crystallization products, morphology, and secondary pore structure of AlPO4-11 molecular sieves was demonstrated. Ways to control their morphology and secondary pore structure were proposed.
The study investigated the effects of the concentration of secondary amines with various molecular weights (specifically, diethylamine, di-n-propylamine, diisopropylamine, and di-n-butylamine), which were used as templates, on the crystallization performance of AlPO4-11 molecular sieves. For this purpose, various analytical methods such as XRD, SEM, and N2 adsorption/desorption were employed. The template concentration (more specifically, the template/Al2O3 ratio) was shown to have a major effect on the phase composition of the crystallization products. However, for each template under study, a high-phase-purity AlPO4-11 could be synthesized only within a narrow range of template/Al2O3 ratios. The study demonstrated the effects of template type on the morphology and dispersion of AlPO4-11 molecular sieves.
The rational design of highly efficient bifunctional SAPO-11 catalysts for hydroisomerization of n-C16 requires unprecedented control over both acidic properties and diffusion characteristics. This work systematically investigates the influence of the SiO2/Al2O3 molar ratio (0.1–0.4) in the initial gel on the physicochemical and catalytic properties of SAPO-11. Using a combination of characterization techniques (XRD, SEM, TEM-SAED, 29Si MAS NMR, and IR-Py), it was established that this parameter serves as a simple tool for crystal engineering. The concentration of Brønsted acid sites and the external surface area demonstrate a non-linear dependency, reaching their maximum at SiO2/Al2O3 = 0.3. Further increase in silicon content reduces both crystallinity and acidity due to the transition to the dominant SM2 + SM3 incorporation mechanism and the formation of silicon islands. Notably, varying the SiO2/Al2O3 ratio enables control over crystal morphology—progressing systematically from truncated cones (SiO2/Al2O3 = 0.1) to flat prismatic platelets (SiO2/Al2O3 = 0.2) and ultimately hierarchical spherical aggregates (SiO2/Al2O3 = 0.4). In n-C16 hydroisomerization, the Pt/SAPO-11(0.2) catalyst demonstrated the highest yield of i-C16 compared to other samples reaching 81%. The platelet morphology ensures a minimal diffusion path (<100 nm), effectively suppressing secondary hydrocracking. This finding underscores that morphology optimization is more critical than maximizing acidity for achieving high selectivity in the context of n-C16 hydroisomerization over Pt/SAPO-11.
Catalytic systems based on SAPO-11 molecular sieves are known for their superior selectivity in the hydroisomerization of higher (C16+) n-paraffins. However, further improvement of SAPO-11-based catalysts is impeded by the lack of effective tools for controlling the morphology and size of silicoaluminophosphate crystals. The present study investigates the effects of the DPA/Al2O3 molar ratio in reaction gels on the nature of intermediate phases and on the physicochemical properties of SAPO-11 molecular sieves. SAPO-11 has been found to crystallize through the formation of different phases depending on the DPA/Al2O3 ratio: an AlPO4·2H2O intermediate at DPA/Al2O3 = 1.0, a mixture of AlPO4·2H2O and a layered silicoaluminophosphate at DPA/Al2O3 = 1.4, and a layered silicoaluminophosphate alone at DPA/Al2O3 = 1.8. Proper adjustment of this ratio provides an effective tool to control the crystal morphology, crystal size, and the porous structure characteristics of the SAPO-11 molecular sieves. It has been identified that, at DPA/Al2O3 = 1.0, cubic and lamellar SAPO-11 nanocrystals 200–400 nm in size are formed. These nanocrystals have the following textural properties: SBET = 286 m2/g; Vmicro = 0.06 cm3/g; and Vmeso = 0.21 m3/g. Furthermore, the effects of the morphology and size of SAPO-11 molecular sieve crystals on their catalytic performance in the hydroisomerization of n-hexadecane have been demonstrated. Promising catalytic systems based on SAPO-11 nanocrystals have been proposed for the hydroisomerization of C16+n-paraffins.