7 December 2022 in Bridges and tunnels: Theory, Research, Practice
Мета. Метою даної роботи є вивчення досвіду використання майна наплавного залізничного мосту НЖМ-56 для технічного прикриття важливих транспортних споруд та швидкого відновлення руху автомобільного транспорту через водні перешкоди на постраждалих в наслідок ведення бойових дій територіях України, з огляду на виклики військового сьогодення. Методика. Вивчення досвіду наведення та експлуатації автомобільних понтонних переправ споруджених з майна наплавного залізничного мосту (НЖМ-56) підрозділами Державної спеціальної служби транспорту через річку Десна в Чернігівській області. Результати. Результатом даної роботи є зібрані данні про переваги та проблемні питання, що виникли при наведені та експлуатації наплавних автомобільних мостів споруджених із майна наплавного залізничного мосту. Використання наявного матеріального ресурсу, а саме майна наплавного залізничного мосту (НЖМ-56), для побудови на ближньому обході від зруйнованих в наслідок ведення бойових дій мостів мостових переходів з наплавними мостами дало можливість в стислі терміни відновити рух автомобільного транспорту на дорогах державного значення. Виявлені слабкі сторони при експлуатації наплавних мостів, це дерев’яне мостове полотно, яке не витримує інтенсивне колісне навантаження та незначна відстань між плавучими опорами (понтонами) по фасаду, що вимагає безперервного догляду за переправою. Відпрацьовані напрямки подальших досліджень для покращення технічних та експлуатаційних характеристик. Запропоновано розглянути можливість використання сталезалізобетонних прогонових будов високого відсотку заводського виготовлення для перекриття прогонів наплавних мостів. Наукова новизна. Наукова зацікавленість полягає в тому, що для швидкого та якісного відновлення руху через широкі та глибокі водні перешкоди, був використаний наявний матеріальний ресурс, майно наплавного залізничного мосту (НЖМ-56), для наведення автодорожніх переправ, що значно покращило транспортну логістику постраждалих в наслідок бойових дій регіонів України. Практична значимість. Спираючись на вивчений досвід наведення наплавних (понтонних) мостів (переправ) можливо зробити висновок, що наплавні мости є ефективним способом забезпечення транспортної логістики в складних місцевих умовах повноводних річок із суттєво змінним протягом року рівнем води, мають низьку переваг, тому використання даних конструкцій може забезпечити швидкісне та якісне відновлення руху.
20 June 2017 in Science and Transport Progress
Purpose. The staged connections of the beams of railway bridge track-way have the simplest design, but some design flaws result in numerous defects. The purpose of the given work is to research the actual stress-train state of the point of connection of the stringers with the floor beams on condition of their staged interposition. It is also necessary to determine possible effect of coupled work of deck beam grid and booms on their stress-strain state. Methodology. To reach the purpose of the study the testing of the existing bridge was conducted. To measure strains (stresses) in the span elements we used the strain gages glued to flange angles of stringers and floor beams and to fillets of lower flange angles of stringers in the points of their support on floor beams. To measure deflections of the truss, stringers and floor beams from static loads we used Aistov’s and Maksimov’s deflectometers, that were installed on lower boom in the middle of span 0-1, as well as on both stringers and floor beams in the middle of the span. Deflectometers were fastened to the span and, by wire communication, to the ground surface. Findings. Stress-strain state of the point of connection of the stringers with the floor beams on condition of their staged interposition was obtained and analyzed. Analysis indicates that, apart from vertical bending of the stringers and beams, there is a significant effect of horizontal bending of floor beams and their torsion, that occur due to the coupled work of track-way beams and top booms, both for P0 beam and for other beams. Originality. Research of stress-strain state of metal track-way staged beams while considering their coupled work with bearing trusses. Practical value. While testing the span under the train load, there are significant additional stresses from horizontal bending of floor beams and their torsion in the floor beam flanges. The appearance of these stresses is caused by inclusion of stringers into coupled work with top booms. Appearing flaws in stringers are caused by local stress concentration due to design features of staged track way.
26 November 2024 in Bridges and tunnels: Theory, Research, Practice
Purpose. The purpose of this work is to investigate the topic of floating (pontoon) bridge systems as an option for overcoming water obstacles, a means of technical cover for national transport infrastructure facilities, and to analyze the current state of application of existing floating system property in order to determine the directions of further research in this area. Methodology. Research of existing floating (pontoon) bridge systems, their classification and technical characteristics, in the context of means of technical cover of important transport facilities and overcoming water obstacles in the conditions of modern warfare. Findings. Provision of temporary pontoon bridges is carried out during the creation of duplicate bridge crossings (ferry crossings) and the restoration of traffic in areas with destroyed transport facilities. Pontoons from sets of floating bridges can be used as platforms for installing special construction equipment during the construction (restoration) of transport facilities. A systemic analysis of floating (pontoon) bridges as an option for overcoming water obstacles for the technical cover of transport infrastructure facilities was conducted. All available floating (pontoon) means that can be used for their intended purpose were considered, and the need for modeling floating (pontoon) systems to expand their application possibilities was determined. Originality. The scientific interest lies in the fact that after conducting an analysis of the classification and technical characteristics of the available means of floating (pontoon) bridge systems, the main directions for further research and their simulations have been established, which will create conditions for their optimized application, taking into account the challenges of today in overcoming wide water obstacles, technical cover objects of the national transport infrastructure by laying duplicate temporary floating bridges (ferry crossings). Practical value. Pontoon systems for bridges are essential for providing technical cover for national transport infrastructure objects. Given the limited number of identical systems available for pontoon bridge systems, it is relevant to research the adaptation of different pontoon systems in one crossing, thereby expanding their application possibilities and providing all the necessary conditions for overcoming the widest water obstacles in Ukraine.
28 April 2022 in Eastern-European Journal of Enterprise Technologies
The technology of repairing reinforced concrete bridges typically involves closing traffic on one half of the structure and performing work on it when it is possible to move vehicles on the second part of this structure. The main process of interest to practitioners in terms of hardening concrete, which occurs in the beams of a span structure during the passage of a temporary moving load, is deformation. By the time the cement of freshly laid concrete of the overhead reinforcement slab is hardened, it is necessary to create the necessary conditions for this (temperature, humidity, immobility over time, etc.). Before concrete acquires strength, movements arising in the span structure cause the destruction of cement stone at the formation stage. It is necessary to investigate the presence of deformations, as well as their impact on the impossibility of forming a homogeneous structure of concrete and its adhesion to reinforcing elements that combine the existing slab with the new one. This study has established deformations induced by a temporary load from 1.61 to 5.83 mm, which have a negative impact on the process of solidification of concrete in the reinforcement slab for a span structure during the repair of a motorway bridge. The three-dimensional models were calculated by simulating a bridge of the M-04 highway. The results underlie the conclusions that the technology of repair work does not take into consideration the required conditions for high-quality concrete strength acquisition in an additional slab. The study results established that operations on concreting an additional overhead reinforcement slab in the presence of vibrational effects exerted by the temporary load on the span structure cannot be performed because of the destruction of concrete at the hardening stage. Given the above issue, several ways to address it have been devised and analyzed; the best of them is recommended
26 March 2024 in Science and Transport Progress
Purpose. The paper aims to highlight and substantiate the need to find rational design schemes for lattice tube concrete bridges with a ride on top based on the analysis of recent research and regulatory documents. Methodology. The current scientific research is analyzed to determine the current state of development of pipe concrete lattice structures. Methods for improving structures are presented. Combinations of filling the grating elements with concrete, variants of cross-sections of the grating elements, their advantages and disadvantages are analyzed. The state of building codes of Ukraine and other countries is considered in order to determine possible options for the design of pipe concrete bridge structures. Due to the lack of detailed research on this issue, the feasibility of implementing optimization studies for these structures and the steps necessary for this are determined. Findings. The optimization of pipe-concrete bridge structures is a relevant area of research, but it requires a multicomponent approach and the use of modern computer facilities. The method of linear optimization is proposed and its general steps for finding economic models are determined. It was found that the base of Ukrainian SCSs in the field of pipe and concrete structures is limited, but can be expanded by using European standards and other international regulations. Originality. The necessity of global development and improvement of pipe concrete gratings of bridge spans is highlighted. Attention is focused on the advantages of this area, which contributes to decision-making at the stage of selecting the type of bridge and detailed design of pipe-concrete lattice bridges. A methodology for finding the optimal grids is proposed, which can integrate existing methods of structural improvement and the requirements of regulatory documents. Practical value. The results of the study can be used to improve the design of pipe concrete bridges at the design stage. Optimization of gratings can help to increase the efficiency of construction and reliability of this type of bridge structure.
29 September 2014 in Bridges and tunnels: Theory, Research, Practice
Анотація Мета. Виявлення недоліків роботи проїзної частини поверхового типу отриманих при обстеженні прогонових будов. Методика. Для досягнення поставленої мети проведено аналіз підсилення балок поверхової проїзної частини Результати. Виявлено недоліки в конструкціях прогонових будов запроектованих ПСК. Наукова новизна. Об’єднані результати досліджень роботи балок проїзної частини поверхового типу Практична значимість. Досвід досліджень та виправлень недоліків в роботі балок проїзної частини на залізниці можливо використати для сучасного усунення цих проблем.