1 May 2020 in Materials Research Bulletin
23 April 2020 in Crystal Growth & Design
CBCarolyne Martins Branco
18 July 2020 in Topics in Catalysis
28 January 2026 in ACS Omega
CBCleyton Alexandre Biffe
CCCarlos Alberto Rodrigues Costa
Carlos Alberto Rodrigues Costa
Long-term stability is a key challenge for Perovskite Solar Cells (PSCs). A promising strategy is to construct two-dimensional|three-dimensional (2D|3D) lead-halide perovskite heterostructures, which integrate the high efficiency of 3D phases with the high durability of 2D layers. These layers are constructed on 3D perovskites by spreading spacer solutions onto their surfaces, forming 2D|3D structures. Here, we systematically investigate the role of two alkylammonium spacers by using butylammonium iodide (BAI, a Ruddlesden–Popper spacer) and butyl-1,4-diammonium diiodide (BDAI2, a Dion-Jacobson spacer) in two different concentration regimes. At low spacer concentrations (5 mmol L–1 BAI and 0.5 mmol L–1 BDAI2), both spacers primarily acted as surface passivators, yielding efficiencies comparable to those of pristine methylammonium lead iodide perovskite. High spacer concentrations (50 mmol L–1 BAI and 5 mmol L–1 BDAI2) induced layered 2D|3D phases with contrasting effects. BAI promoted structural flexibility (by varying n from 1 to 2) and improved moisture resistance, thereby enhancing device stability. BDAI2 unexpectedly leads to rapid degradation under ambient processing conditions. Photoluminescence, conductive atomic force microscopy, and electrochemical impedance spectroscopy confirmed that excessive spacer incorporation introduces insulating barriers that hinder charge transport. Optimized concentrations suppress nonradiative recombination without compromising conductivity. Durability tests demonstrated that BAI consistently prolonged device lifetime, while BDAI2 devices degraded rapidly. These results reveal that spacer chemistry and concentration critically determine the trade-off between charge transport and environmental resilience in 2D|3D PSCs. By clarifying these mechanisms, this work establishes insights into the rational design of spacer-assisted perovskites, offering a pathway toward more durable and commercially viable perovskite photovoltaics.
18 August 2022 in ChemElectroChem
1 January 2025 in Journal of the Brazilian Chemical Society
Perovskite solar cells (PSCs) have attracted significant attention due to their high solarto-electrical energy conversion, low cost, and potential scalability. The main drawbacks of this technology are environmental and health aspects of its production that typically relies on harmful solvents, like dimethylformamide (DMF) and chlorobenzene. In this work, PSCs based on methylammonium lead iodide (MAPbI3) were prepared in laboratory ambient conditions using different ratios of ElectroGreen® (a commercial green solvent blend), DMF, and dimethyl sulfoxide (DMSO). Devices obtained using this solvent mixture reached up to 15.70% of solar-toelectric energy conversion, matching the efficiency of solar cells prepared without ElectroGreen®, while reducing the use of DMF by up to 50%. These results demonstrate the possibility of achieving an environmentally friendly PSC production using the green solvent without compromising photoconversion efficiencies (PCEs).