1 April 2019 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Mathematical and s-models of cargo oscillations during movement of bridge crane
16 November 2018 in MATEC Web of Conferences
The paper considers the algorithm for calculating the pneumatic transport systems of the main constructions: with high vacuum and with different pressures. The analysis of the dependence of all calculation elements on the design data of the transport system of the considered structures was carried out. In order to accelerate the calculation of such systems, the analytical dependence of the power of the compressor drive on the type of cargo, the coefficient of concentration of the transported mixture, the design productivity, and the geometric parameters of the route, the number and types of auxiliary devices (ells and shutters) are constructed. A graphical analysis of the dependence of compressor drive power of the pneumatic transport systems with high vacuum and with different pressures on the design data: the mixture concentration coefficient, the length of transportation, the design productivity for the transportation of cement with a given route configuration. The directions for further research have been determined.
2 July 2015 in Science and Transport Progress
INFLUENCE ANALYSES OF DESIGNED CHARACTERISTICS OF THE ELEVATOR TO THE PARAMETERS OF ITS DRIVE
29 April 2015 in Science and Transport Progress
Purpose. One of basic elements of band bucket elevators is their drive. For determination of power drive it is necessary to conduct calculations on standard by methods, in what it is needed to expend enough time. One of project parameters is productivity of elevator. It is necessary to build parametric dependence of power drive of elevator on its design capacity that takes into account a type and descriptions of load, lifting height, standard sizes and parameters of buckets and tapes. Methodology. Using the method of hauling calculation of band buckets elevators, the parametric dependences of power drive of high-speed elevators are built with deep and shallow buckets from their productivity at fixed type of load and height of getting up. Findings. It is set on the basis of the built parametric dependences that the change function of a size of elevator power from design capacity (at fixed to the lifting height, load type, rate of tape movement) is piecewise and droningly increasing. The intervals of project values of productivity, which provide the permanent size of elevator power drive are certain in a general view. As the example of application of the recived results the construction process of power drive dependence from design capacity of elevator of shotblasting room, which is intended for transporting of the metallic shot using for consolidating of carriage springs, is considered. For concrete type of load and lifting height of such elevator graphic dependence of power drive on productivity was built. Originality. Parametric dependences of elevator power drive on its design capacity were first built, which take into account a type and physical and mechanical descriptions of load, lifting height, standard sizes and parameters of buckets and tapes. Practical value. The use of the built dependences enables in relation to rapid determination of approximate value of power drive of vertical high-speed elevators with deep and shallow buckets on the stage of planning and to execute the high-quality selection of its basic elements at concrete project descriptions: type of load, productivity, lifting height.
25 February 2016 in Science and Transport Progress
RESEARCH OF DEPENDENCE OF BELT CONVEYER DRIVE POWER ON ITS DESIGN PARAMETERS
25 December 2016 in Science and Transport Progress
Purpose.One of the main elements of the inclined belt bucket elevators is their drive. To determine the drive power, it is necessary to carry out calculations according to standard methods, which are described in the modern literature. The basic design parameters are the productivity, lifting height, type and properties of the transported material, the angle of inclination. It is necessary to build a parametric dependence of the driving power of the elevator on its design parameters, which takes into account the standard sizes and types of buckets and belts. Methodology. Using the methodology of traction calculation of inclined belt bucket elevator there were built parametric dependences of efforts in specific points of the route of the elevator, as well as the parametric dependences of the drive power of high-speed elevators with deep and shallow buckets on their design parameters and characteristics. Findings. On the basis of constructed parametric dependencies, it was found that the function of changing the value of the elevator’s power from design capacity (at fixed lifting height, type of cargo, belt speed) is piecewise constant and monotonically increasing. It was built a graphical representation of elevator drive power on the angle of its inclination within acceptable limits of change. The resulting relationship is non-linear and monotonically decreasing. In general terms the intervals of project performance values, which provide a constant value of drive power of inclined elevator were defined. As an example of the obtained results it was observed the process of dependence construction of the drive power on design capacity and inclination angle of the elevator for transporting the fine coal. Originality. For the first time there were constructed the parametric dependences of drive power of inclined bucket elevator on its design parameters that take into account the standard sizes and types of buckets and belts. Practical value. Using the constructed dependencies enables relatively quick determination of the approximate value of the drive power of high-speed inclined elevators with deep and shallow buckets at the design stage and high-quality selection of its basic elements in the design of specific characteristics: type of cargo, productivity, lifting height, angle of inclination.