23 October 2017 in IEEE Journal of Selected Topics in Quantum Electronics
A kind of saturable absorber (SA) based on layered MoSe 2 nanosheets has been fabricated successfully by an ultrasound-assisted liquid phase exfoliation method. The as-prepared MoSe 2 SA was characterized and employed as Q-switch in a diode-pumped Tm-doped crystalline all-solid-state laser at around 2 μm. A stable passively Q-switched 2 μm laser with a maximum pulse repetition rate of 158 kHz and a minimum pulse width of 520 ns was successfully realized. A maximum average output power of 1.19 W, corresponding to a maximum pulse energy of 12.7 μJ and pulse peak power of 21.8 W, has been obtained. It was the first demonstration of MoSe 2 SA in realizing a solid-state 2 μm pulsed laser, to the best of our knowledge. The results confirmed the excellent ability and promising potential of MoSe 2 SA as an optical modulator in generating high repetition rate and short pulsed laser at the midinfrared spectral band.
12 March 2018 in IEEE Photonics Technology Letters
By transferring the colloidal suspensions of ferroferric-oxide (Fe 3 O 4 ) nanoparticles (FONPs) onto a quartz plate, zero-dimension FONPs saturable absorber (SA) is successfully fabricated and employed in a Tm:Lu 3 Al 5 O 12 (Tm:LuAG) bulk laser. The properties of the FONPs-SA including Raman response, nonlinear optical response, and broad-band spectral absorption from 1800 nm to 2500 nm are measured. With the as-prepared FONPs-SA, laser pulses with the shortest duration of 600 ns, a maximum repetition rate of 96 kHz and maximum pulse energy of $4.9~\mu \text{J}$ are obtained, corresponding to a maximum peak power of 8.2 W. This is the first experimental demonstration of the zero-dimension FONPs-SA as Q-switch in $2~\mu \text{m}$ spectral region and even longer wavelength mid-infrared spectral region, to the best of our knowledge, which indicates that the zero-dimension FONPs-SA can act as a promising optical modulator in mid-infrared spectral region.