The X-ray fast imaging beamline at SSRF is a new beamline under construction and will provide X-ray micro-imaging on multiple time-scale from 100 ps, s and ms to study the following fast processes such as deformations and invalidations of materials under strong dynamic load and the high pressure/speed spray process of fuel in automobile engines. The beamline will have the capability of about 100 ps temporal resolution and micrometer scale spatial resolution. Including the researches of dynamic impact of materials, high speed fluid dynamics and the calibration of the streak camera could be done on this beamline. In addition, X-ray dynamic micro-CT is also available on the beamline, which is a powerful tool for the researches of the deformation mechanism in the invalidation dynamics processes of light-weight high-strength alloys and the formation mechanism of the defects in the solidification processes of these alloys. Using the dynamic micro-CT technique, the research of soft matter system including granule, foam and colloid also could be carried out to establish the links between its microscopic structure, kinematics and macroscopic appearance. A cryogenic permanent magnet undulator (CPMU) cooled by liquid nitrogen will be selected as the light source providing the X-ray photons with energy range of 8.7-30 keV, whose smallest magnet gap is 6 mm. With the periodic length of 18mm and 170 periods, the total length of the undulator is 3.06 m. The beamline will provide pink beam mode and monochromatic beam mode with a liquid nitrogen cooled double-crystal monochromator. The first crystal of DCM can be moved in or out of the beam, making the monochromatic or pink beam available. For the fast imaging, a millisecond-shutter (water cooled) and a microsecond-shutter are used to control the exposure time of imaging detectors and reduce unwanted heat of the pink beam. The experimental endstation will provide multiple X-ray imaging detectors to meet the different requirements of spatial and temporal resolution. In-situ devices include small gas gun, compression/tension Hopkinson bar, high speed spray set-up, furnace with electric/magnetic field and stretching devices. Up to now, the construction of the beamline and two-turn small beam current commissioning has been completed. The test results show the the design technical indexes have been reached. The beamline will be in test operation in 2022.
Based on the brightness temperature observed by the Fengyun-4A satellite, around eight hundred mesoscale convective systems (MCSs) are identified in the middle reaches of the Yangtze River Basin during the warm seasons (April–September) of 2018–2021, which are categorized into the quasistationary (QS) type and the outward-moving (OM; i.e., vacating the source region) type. Afterward, the initiations of the MCSs are backward tracked using a hybrid method of areal overlapping and optical flow. Then, the main features of QS and OM MCSs and their respective synoptic circulations and environmental parameters are analyzed. The QS MCSs primarily occur in July and August and are mainly initiated in the afternoon. The OM MCSs mostly occur in June and July with two initiation peaks appeared at noon and late night, respectively. The QS MCSs are mainly initiated in mountainous areas, and they are primarily caused by local thermal effects. In contrast, the OM MCSs are mainly initiated in plain areas under synoptic forcings. Circulations of a total of 285 days (without direct influencings from tropical cyclones) are objectively classified into three patterns by using the k-means algorithm. Pattern-I (128 days) which is closely related to low-level jets, shows the most similar features to those of typical Mei-yu fronts, and it acts as the most favorable circulation type for MCSs’ initiations. Pattern-II (66 days) is dominated by northwesterlies, with a relatively stable layer in the low-level troposphere. Pattern-III (91 days) features a dry-adiabatic or even a superadiabatic layer that contributes to lowering the layer stability.
Based on the brightness temperature observed by the Fengyun-4A satellite, eight hundred mesoscale convective systems (MCSs) are identified in the middle reaches of the Yangtze River Basin during the warm seasons of 2018–2021, and these MCSs are categorized into the quasistationary (QS) type and the outward-moving (OM) type. Afterward, the initiations of the MCSs are backward tracked using a hybrid method of areal overlapping and optical flow. Then, the intensity, evolution and distribution of cloud-to-ground (CG) lightning and radar composite reflectivity (CR) associated with MCSs are explored.The QS-MCSs primarily occur in July and August and are mainly initiated in the afternoon. The OM-MCSs mostly occur in June and July with two initiation peaks at noon and late night, respectively. The QS-MCSs are mainly initiated in mountainous areas. In contrast, the OM-MCSs are mainly initiated in plain areas. Compared to the OM-MCSs, the QS-MCSs show notable diurnal variation in intensity and develop more rapidly. The geographical distribution of CG lightning associated with MCSs shows that the highest occurrence tends to appear over the transition zone of the Poyang Lake Plain and the surrounding mountains. The CG lightning associated with MCSs features a relative lower proportion of negative CG lightning occurrences. An overall negative correlation between brightness temperature and the peak current of CG lightning is documented with seasonal variations. The advection of ice particles associated from convective cores into nearby stratiform regions caused by relatively stronger mid-to-upper-level winds, may explain the positive correlations in May and September. A time lag of 0–2 h between the CG lightning occurrence peak and the MCS extent maximum is found. As the MCS develops, the proportion of convective clouds decreases, the proportion of nonprecipitating anvil increases, and the proportion of stratiform consistently maintains 50%–60% of the MCS extent, dominating throughout its life span. The main region for stratiform is primarily in the southern part of the MCS, while convective clouds are mainly in the northern part, possibly due to the influence of the Meiyu front.