9 September 2021 in Journal of Mechanics
In this work, the Poincaré map numerical method was successfully developed to solve the fourth-order differential equation that describes the flexural vibrations of a beam, within the Timoshenko beam theory. The Euler-Bernoulli continuity conditions were considered, which are valid for frequencies smaller than the critical frequency. As an example, this method was used to design a complex elastic structure, characterized by a flexural frequency spectrum with a broad band gap. Such structure consists of two coupled phononic crystals, which were designed with filling factor values in such a way that in their bending frequency spectra, an allowed band of the first part, overlaps with a band gap of the second one and vice versa. The resulting composed system has a much wider effective gap than its original components, between 4 and 10.5 kHz. This system works as an elastic bending wave filter. Finally, these three structured elastic systems were constructed, and characterized by the acoustic resonance spectroscopy technique. The natural flexural frequencies as well as the corresponding wave amplitudes of each structured beam were measured. The experimental measurements show excellent agreement with the numerical simulation.
26 November 2019 in arXiv
Solid state physics deals with systems composed of atoms with strongly bound electrons. The tunneling probability of each electron is determined by interactions that typically extend to neighboring sites, as their corresponding wave amplitudes decay rapidly away from an isolated atomic core. This kind of description is essential to material science, and it rules the electronic transport properties of metals, insulators and other condensed matter systems. The corresponding phenomenology is well captured by tight-binding models, where the electronic band structure emerges from atomic orbitals of isolated atoms plus their coupling to neighboring sites in a cristal. In this work, a mechanical system that emulates dynamically a tightly bound electron is built. This is done by connecting mechanical resonators via locally periodic aluminum bars acting as couplers. When the frequency of a particular resonator lies within the frequency gap of a coupler, the vibrational wave amplitude imitates a bound electron orbital. The localization of the wave at the resonator site and its exponential decay along the coupler are experimentally verified. The quantum dynamical tight-binding model and frequency measurements in mechanical structures show an excellent agreement.