In this work, we investigate the structural, optical, ferroelectric, and photo-response properties of Bi[Formula: see text]La[Formula: see text]Ti 3 O[Formula: see text] (BLT) films prepared by the sol–gel method, deposited by dip-coating on glass, indium tin oxide (ITO)-coated glass, and Pt-coated Si substrates with a thickness of approximately 170 nm. In the precursor solution, acetic acid served as the solvent, and ethanolamine was a stabilizing agent. The structural analysis of the films, performed using X-ray diffraction, revealed that the resulting BLT films exhibited a polycrystalline orthorhombic phase with a crystallite size of approximately 97 nm. Scanning electron microscopy (SEM) images showed that the BLT films deposited on Pt-coated Si substrates had a more compact structure than those grown on ITO-coated glass substrates. The optical properties of the BLT films were determined via ultraviolet-visible (UV–Vis) spectroscopy, using reflection and transmission spectra, which were fit to optical models to obtain the refractive index, extinction coefficient, and BLT film thickness. The calculated energy band gap was 3.63 eV. The ferroelectric properties of the deposited films were obtained from hysteresis measurements, and we analyzed the photo-response by measuring current–voltage (I–V) curves in darkness and under ultraviolet (UV) illumination. The films deposited on a Pt-coated Si substrate show a significant difference in I–V measurements between dark and illuminated conditions, exhibiting characteristic diode behavior and a high contrast in photo-response under UV illumination compared to dark conditions, making them a good candidate for photodetectors in the ultraviolet region.