4 February 2019 in Nature Energy
25 June 2018 in Advanced Materials
4 January 2016 in Journal of Materials Chemistry A
Lead halide perovskite solar cells (PSCs) suffer from poor long-term stability, especially due to photo-induced degradation, as PSCs function under continuous sunlight. However, the origins of this instability have not been clearly explored. Herein, the photo-induced degradation of PSCs with mesoporous and planar architectures are investigated, respectively, and the main origin is proved to be correlated with the hole transport material (HTM)/metal (Au) electrode interface. The solar irradiation of PSCs causes significant deterioration of device performance, with the efficiency decreasing from approximately 18% to 2.46% for planar PSCs in 180 min. Electrical analysis of the PSCs and XPS measurements show that the deteriorated performance is induced by retarded carrier extraction from the HTM to the Au electrode, due to a broken interface binding. Accordingly, in situ renewal of the Au electrode was found to cause notable recovery (approximately 80%) of the device performance of both mesoporous and planar PSCs. In comparison, the material degradation of perovskite and the TiO2/perovskite interface were also studied; however, these showed minor effects on the photo-induced degradation of PSCs. These results indicate that the photo-induced degradation of PSCs is mainly caused by the HTM/Au interface. This study provides an important insight into the photo-induced degradation of PSCs, and is crucial for the fabrication of highly photo-stable PSCs.
14 December 2016 in Journal of Materials Chemistry A
The structure of the perovskite solar cells (PSCs) is either mesoporous or planar. Here, a novel structure for highly efficient and stable PSCs is proposed, i.e., an embedded structure, which combines the advantages of the mesoporous and planar structures. The embedded structure utilizes a TiO2 nanoparticle embedded perovskite (CH3NH3PbI3) film as the absorption layer. The presence of TiO2 nanoparticles in the perovskite film could improve the electron extraction, and promote the formation of a compact perovskite layer with large grains. Consequently, the performance of the PSCs is significantly improved with the efficiency increasing from 16.6% for the planar structure to 19.2% for the embedded structure, which is the best performance of the MAPbI3-based PSCs. Furthermore, the TiO2 embedded perovskite films present better long-term stability than the pristine perovskite films, and the corresponding PSCs, which have no other chemical modifications, also show excellent stability with efficiency approaching 80% (for average) or 90% (for the best) after being exposed to air for 28 days without encapsulation.
9 August 2022 in Journal of Materials Chemistry A
Based on previous experimental results, machine learning is employed to intelligently screen interface materials for use in PSCs at the atomic level. The results of the high-throughput predictions were validated via DFT calculations and experiments.
10 December 2018 in Nanoscale
Long-term stability of the perovskite materials and devices in high humidity could be improved by the moisture-tolerant supermolecules.