Various slim robots, such as surgical robots or humanoid robot fingers, are remotely actuated using transmission cables. If pull–pull drive is applied to actuate them using circular driving spools regardless of the shape of the joints, the tension of the driving cable becomes difficult to be maintained properly. Fortunately, it is possible to solve such a cable slack problem by providing an appropriate cable actuation length to the joint structure of the robot from the cable driving unit. Therefore, we propose a harmonious nonlinear cable actuation mechanism suitable for driving noncircular shaped joints. The proposed cable driver can mechanically provide the required cable actuation length to suit the angle change of the target joint using a pair of noncircular pulleys without increasing the number of actuators. In this paper, a design methodology of a noncircular pulley that can be applied to pulleyless rolling joints (PR joints) as well as pulleyless hinge joints is shown. Moreover, a practical cable driver is designed for actuating a hyper-redundant discrete bending joint composed of PR joints, and its effectiveness is verified through experiments. This novel cable actuation mechanism using noncircular pulleys or gears is expected to be applicable to various miniature robots such as surgical robots and animal robots of continuum structure in the future.
In this paper, we investigate a motion-tracking system for robotic computer-assisted implant surgery. Failure of the accurate implant positioning may result in significant problems, thus an accurate real-time motion-tracking system is crucial for avoiding these issues in computer-assisted implant surgery. Essential features of the motion-tracking system are analyzed and classified into four categories: workspace, sampling rate, accuracy, and back-drivability. Based on this analysis, requirements for each category have been derived to ensure that the motion-tracking system meets the desired performance criteria. A novel 6-DOF motion-tracking system is proposed which demonstrates high accuracy and back-drivability, making it suitable for use in computer-assisted implant surgery. The results of the experiments confirm the effectiveness of the proposed system in achieving the essential features required for a motion-tracking system in robotic computer-assisted implant surgery.
19 January 2017 in International Journal of Control, Automation, and Systems