24 May 2019 in Scientific Reports
Sufficiently high voltage applied between two metal electrodes, even in ultra high vacuum conditions, results in an inevitable discharge that lights up the entire gap, opening a conductive channel through the vacuum and parasitically consuming large amounts of energy. Despite many efforts to understand the processes that lead to this phenomenon, known as vacuum arc, there is still no consensus regarding the role of each electrode in the evolution of such a momentous process as lightning. Employing a high-speed camera, we capture the entire lightning process step-by-step with a nanosecond resolution and find which of the two electrodes holds the main responsibility for igniting the arc. The light that gradually expands from the positively charged electrode (anode), often is assumed to play the main role in the formation of a vacuum arc. However, both the nanosecond-resolution images of vacuum arc evolution and the corresponding theoretical calculations agree that the conductive channel between the electrodes is built in the form of cathodic plasma long before any significant activity develops in the anode. We show evidently that the anode illumination is weaker and plays a minor role in igniting and maintaining the conductive channel.
23 August 2016 in Journal of Applied Physics
Research on sheath expansion is critical to the understanding of the dielectric recovery process in a vacuum interrupter after interruption of vacuum arcs. In this paper, we investigated how residual plasma affects breakdown in the sheath expansion period after the current zero. To simulate sheath expansion and breakdown, we developed a fully kinetic particle-in-cell Monte Carlo collision model with one spatial dimension and three velocity dimensions. The model accounted for various collisions, including ionization, excitation, elastic collisions, charge exchange, and momentum exchange, and we added an external circuit to the model to make the calculations self-consistent. The existence of metal vapor slowed the sheath expansion in the gap and caused high electric field formation in front of the cathode surface. The initial residual plasma, which was at sufficiently low density, seemed to have a limited impact on breakdown, and the metal vapor dominated the breakdown in this case. Additionally, the breakdown probability was sensitive to the initial plasma density if the value exceeded a specific threshold, and plasma at sufficiently high density could mean that breakdown would occur more easily. We found that if the simulation does not take the residual plasma into account, it could overestimate the critical value of the metal vapor density, which is always used to describe the boundary of breakdown after interruption of vacuum arcs. We discussed the breakdown mechanism in sheath expansion, and the breakdown is determined by a combination of metal vapor, residual plasma, and the electric field in front of the cathode surface.
22 October 2020 in Journal of Physics D: Applied Physics
Vacuum breakdown, also known as vacuum discharge, is a common phenomenon in nature and is gaining an increasingly important role in modern technologies. In spite of a remarkable advance in our understanding of the nature of the breakdown, the role of the anode, i.e. the positively charged electrode, in the development of the breakdown is still completely unclear. In this paper, we employ a streak camera with picosecond time resolution to observe precisely the evolution of anodic glow from different anode materials. The results show that the choice of the anode material does not affect either the delay time between the cathodic and anodic flares or the formation of the conductive channel. Furthermore, we show that the heating of the anode surface by runaway electron currents is not sufficient to evaporate enough atoms for the anodic glow. On the other hand, we show that the neutrals for the anodic flare can be produced by the ions from the expanding cathode plasma by sputtering. Finally, the coincidence in time of the voltage collapse and the anode glow is consistent with the fast expansion of the cathode plasma, which causes both the voltage collapse and the anode glow when it reaches the anode, and densifies by sputtering and reflection. However, the two events are not in direct dependence of one another, since the order of their appearance is random, implying that a fully conductive channel can be established without any light emission from the anode.
16 August 2021 in Journal of Materials Science
17 July 2020 in IEEE Transactions on Plasma Science
The distribution and dissipation of neutral atoms are crucial for understanding the dielectric recovery process after interrupting direct current (DC) vacuum arcs. This article aims to investigate the dissipation of copper atoms after a forced extinction of the vacuum arc experimentally, adopting the plane laser-induced fluorescence method. The change in the 2-D distribution of copper atoms with time is presented. The results show that the magnetic fields, the axial magnetic field (AMF), and the transverse magnetic field (TMF) have a limited effect on the initial density of copper atoms. For both the AMF and the TMF, the copper atom densities at current zero (CZ) vary in the range (6-8) x10¹⁷ m⁻³ when 3-kA vacuum arcs are forced to 0 in 0.2 ms. Contrary to the TMF case, in the AMF case, the evaporation on the anode after the CZ results in long-existing atoms near it. Consequently, the atom density of the TMF decays faster than that of the AMF, which indicates that a vacuum interrupter with the TMF contacts has a better performance when interrupting a DC load. The difference between the two magnetic fields originates from the arc control patterns. Namely, the AMF tends to keep vacuum arcs in a stable mode, which is unfavorable for a DC interruption; on the contrary, the TMF drives the vacuum arcs to move at high velocities resulting in faster dissipation of copper atoms after the CZ. In addition, the composition proportion of CuCr contacts has a limited effect on the diffusion of copper atoms when a low-vacuum arc is interrupted.
9 January 2020 in Journal of Physics D: Applied Physics
Vacuum breakdown (also known as arc or discharge) occurs when a sufficiently high electric field is applied between two electrodes in vacuum. The discharge is driven by the formation of an intensively glowing plasma at the cathode, which is followed by the ignition of an anode flare that gradually expands and fills the gap. Although it has been shown that the anode electrode does not play a significant role in the breakdown initiation, the nature of the anodic glow is of paramount importance for understanding the breakdown evolution. In this work, we use time- and space-resolved spectroscopy to study the anode flare. By using different anode and cathode materials, we find that excitations from both anode and cathode ions and neutrals contribute to the anodic glow. This implies that the cathodic plasma expands towards the anode without emitting any detectable light and starts glowing only when it reaches and interacts with the anode electrode. This interaction causes the introduction of anodic species in the plasma. The latter starts producing an expanding glow which contains spectra from both the cathode and anode materials and gradually fills the gap as the plasma equilibrates. Finally, we observe that after a breakdown, cathode material deposits on the anode electrode, gradually coating it. After hundreds of breakdowns, this coating covers the anode, resulting in the decay and possible elimination of the anode material signal in the spectra.