23 July 2018 in Journal of Microelectromechanical Systems
Parylene C is a thin-film polymer used as a biocompatible barrier layer in biomedical implants and implantable MEMS; free-film Parylene C may serve as both the substrate and insulation in polymer-based microdevices, a growing branch of biomedical technology. The adhesion of vapor deposited Parylene C, particularly when exposed to wet, in vivo environments, is a critical determinant of device lifetime for such polymer-based implants. This paper explores several novel strategies for improving the adhesion of multi-layer Parylene structures, including thermal annealing and the use of several chemical interposer layers. Interfacial adhesion of Parylene-Parylene and Parylene-platinum-Parylene films was examined using a standard T-peel test to quantify adhesion and measure film integrity under chronic exposure to saline up to two years. Improved adhesion and barrier properties in Parylene-Parylene films resulted from the inclusion of diamond-like carbon and ethylene glycol diacrylate layers. Thermal annealing improved Parylene film integrity in wet environments but was insufficient for improving the integrity of Parylene-platinum interfaces. A 100-fold increase in adhesive strength at such interfaces was achieved using a commercially available adhesion promoter, and the corresponding improvements in resistance to moisture driven delamination were observed. X-ray diffraction and X-ray photoelectron spectroscopy results are provided to highlight the role of film morphology and surface composition in adhesion integrity. [2018-0076]
6 November 2023 in bioRxiv
Large scale monitoring of neural activity at the single unit level can be achieved via electrophysiological recording using implanted microelectrodes. While neuroscience researchers have widely employed chronically implanted electrode-based interfaces for this purpose, a commonly encountered limitation is loss of highly resolved signals arising from immunological response over time. Next generation electrode-based interfaces improve longitudinal signal quality using the strategy of stabilizing the device-tissue interface with microelectrode arrays constructed from soft and flexible polymer materials. The limited availability of such polymer microelectrode arrays has restricted access to a small number of researchers able to build their own custom devices or who have developed specific collaborations with engineering researchers who can produce them. Here, a new technology resource model is introduced that seeks to widely increase access to polymer microelectrode arrays by the neuroscience research community. The Polymer Implantable Electrode (PIE) Foundry provides custom and standardized polymer microelectrode arrays as well as training and guidance on best-practices for implantation and chronic experiments.