3 August 2018 in Science Advances
Droplet-based printing methods are widely used in applications ranging from biological microarrays to additive manufacturing. However, common approaches, such as inkjet or electrohydrodynamic printing, are well suited only for materials with low viscosity or specific electromagnetic properties, respectively. While in-air acoustophoretic forces are material-independent, they are typically weak and have yet to be harnessed for printing materials. We introduce an acoustophoretic printing method that enables drop-on-demand patterning of a broad range of soft materials, including Newtonian fluids, whose viscosities span more than four orders of magnitude (0.5 to 25,000 mPa·s) and yield stress fluids (τ0 > 50 Pa). By exploiting the acoustic properties of a subwavelength Fabry-Perot resonator, we have generated an accurate, highly localized acoustophoretic force that can exceed the gravitational force by two orders of magnitude to eject microliter-to-nanoliter volume droplets. The versatility of acoustophoretic printing is demonstrated by patterning food, optical resins, liquid metals, and cell-laden biological matrices in desired motifs.
1 February 2012 in The Journal of the Acoustical Society of America
The first five resonance modes for transport of matter in a line-focused acoustic levitation system are investigated. Contactless transport was achieved by varying the height between the radiating plate and the reflector. Transport and levitation of droplets in particular involve two limits of the acoustic forces. The lower limit corresponds to the minimum force required to overcome the gravitational force. The upper limit corresponds to the maximum acoustic pressure beyond which atomization of the droplet occurs. As the droplet size increases, the lower limit increases and the upper limit decreases. Therefore to have large droplets levitated, relatively flat radiation pressure amplitude during the translation is needed. In this study, using a finite element model, the Gor'kov potential was calculated for different heights between the reflector and the radiating plate. The application of the Gor'kov potential was extended to study the range of droplet sizes for which the droplets can be levitated and transported without atomization. It was found that the third resonant mode (H(3)-mode) represents the best compromise between high levitation force and smooth pattern transition, and water droplets of millimeter radius can be levitated and transported. The H(3)-mode also allows for three translation lines in parallel.
1 January 2012 in AIP Conference Proceedings
Acoustic levitation is a physical phenomenon that arises when the acoustic radiation pressure is strong enough to overcome gravitational force. It is a nonlinear phenomenon which can be predicted only if higher order terms are included in the acoustic field calculation. The study of acoustic levitation is usually conducted by solving the linear acoustic equation and bridging the gap with an analytical solution. Only recently, the scientific community has shown interest in the full solution of the Navier-Stokes' equation with the aim of deeply investigating the acoustic radiation pressure. We present herein a numerical model based on Finite Volume Method (FVM) and Dynamic Mesh (DM) for the calculation of the acoustic radiation pressure acting on a rigid sphere inside an axisymmetric levitator which is the most widely used and investigated type of levitators. In this work, we focus on the third resonance mode. The use of DM is new in the field of acoustic levitation, allowing a more realistic simulation of the phenomenon, since no standing wave has to be necessarily imposed as boundary condition. The radiating plate is modeled as a rigid cylinder moving sinusoidally along the central axis. The time-averaged acoustic force exerting on the sphere is calculated for different radii Rs of the sphere (0.025 to 0.5 wavelengths). It is shown that the acoustic force increases proportional to Rs 3 for small radii, then decreases when the standing wave condition is violated and finally rises again in the travelling wave radiation pressure configuration. The numerical model is validated for the inviscid case with a Finite Element Method model of the linear acoustic model based on King's approximation.
1 April 2011 in The Journal of the Acoustical Society of America