10 August 2022 in IEEE/ASME Transactions on Mechatronics
Soft grippers are receiving growing attention due to their compliance-based interactive safety and dexterity. Hybrid gripper with soft actuators enhanced by rigid constraints is receiving growing attention in soft gripper design. With rigid structural components actuated by soft actuators, they could achieve excellent grasping adaptability and payload while also being easy to model and control with conventional kinematics. However, existing works were mostly focused on achieving superior payload and perception with simple planar workspaces, resulting in far less dexterity compared with conventional grippers. In this work, we took inspiration from the human metacarpophalangeal (MCP) joint and proposed a new hybrid gripper design with eight independent muscles. It was shown that adding the MCP complexity was critical in enabling a range of novel features in the hybrid gripper, including in-hand manipulation, lateral passive compliance, as well as new control modes. A prototype gripper was fabricated and tested on our proprietary dual-arm robot platform with vision-guided grasping. With very lightweight pneumatic bellows soft actuators, the gripper could grasp objects over 20 times its weight with lateral compliance. Using the dual-arm platform, highly anthropomorphic dexterous manipulations were demonstrated using two hybrid grippers, from tug of war on a rigid rod to passing a soft towel between two grippers using in-hand manipulation. Matching the novel features and performance specifications of the proposed hybrid gripper, the underlying modeling, actuation, control, and experimental validation details were also presented, offering a promising approach to achieving enhanced dexterity, strength, and compliance in robotic grippers.
17 February 2020 in IEEE Robotics and Automation Letters
Proprioception is the ability to perceive environ-mental stimulations through internal sensory organs. Enabling proprioception is critical for robots to be aware of the environmental interactions and respond appropriately, particularly for high-payload grippers to ensure safety when handling delicate objects. State-of-the-art robotic grippers with soft actuators are typically equipped with pressure sensors for pneumatic regulation and control, but very few utilized them for proprioceptive purposes. This lack of environmental awareness was largely compensated by their inherent compliance and conformity, but also due to the generally limited force capabilities. Targeting at this gap, this work proposes a novel Proprioceptive Origamic Soft Actuator (POSA) joint, and a corresponding hybrid robotic gripper design with high-payload soft origamic actuators and rigid supporting frames, achieving up to 564.5N actuator output force or 302.4N finger gripping force at 150kPa low pneumatic pressure and 3.2kg self-weight. Despite the substantially higher force capability over state-of-the-art soft grippers, the proposed hybrid gripper could retain the excellent inherent compliance thanks to the novel soft origamic actuators. Moreover, a novel scheme of multi-actuator proprioception is proposed by only using the embedded pneumatic pressure sensors, to enable the hybrid gripper with environmental awareness, achieving real-time position and force estimations of errors at <1% and 5.6%, respectively. The principles, design, prototyping, and experiments of the proposed hybrid high-payload gripper were presented in this paper. Combining soft robotic compliance, high payload, and proprioception, the gripper could both hold a pealed grape and crack a walnut, with positio
17 January 2025 in IEEE Robotics and Automation Letters
Pneumatic actuated soft robots attract increasing interest of the researchers due to the availability and simplicity in actuation. The soft robots driven by soft pneumatic actuators (SPAs) of various active volumes demand pneumatic systems with various range of flow rate. However, the usually bulky and hard-to-carry pneumatic actuation systems restrict the portability, and the air pumps provide constant flow rate which constrained the applications such as soft wearable devices and scenarios require fine flow rate control. In this work, aiming for simplicity, high portability, continuous and small flow rate regulation, the pneumatic actuation system consists of identical integrated soft robotic drivers (iSoRD) modules is proposed, obtaining positive and negative pressure output (-53 ∼ 83 kPa) in each module using one-pump-one-valve (4-way/2-position solenoid) design. With the check valves installed and the modular design, pressure holding and flow independence are achieved in each pneumatic branch. The heat generation (37.7°C) and power consumption (2.95 W per-channel) are measure to verify usability. The continuous and fine flow rate regulation (15 mL/s) is achieved by applying the PID controller on the pump motor, which shows superior performance in signal tracking in comparison with the non-continuous Bang-Bang and Varia-speed Bang-Bang algorithms. With the same control, the iSoRD system reduces the error by 37.5% in comparison to our previous two-pump system. The portability, versatility in wearing, practicality and adaptivity of the system are validated by driving three wearable soft robots, a small gripper and a pollination device. Comparing with the existing, the iSoRD is capable of fine flow rate regulation in both negative and positive pressure range with low power consumption, portability and versatility, which will benefit the pneumatic soft robotic systems with broadened application potential.