24 December 2021 in Vestnik of Nosov Magnitogorsk State Technical University
1 September 2022 in Russian Journal of Nondestructive Testing
We consider the features of using modern nondestructive methods for assessing structural degradation in the process of elastic-plastic cyclic loading of normalizing (average grain size 10 μm) and overheating (average grain size 45 μm) zones of the heat affected zone of St3 steel. In this case, the approaches of digital image processing of microstructures, fractal analysis, and ultrasonic and magnetic testing were used. The features of the stages of degradation of the structure under fatigue and the corresponding behavior of the numerical microstructure parameters such as fractal dimension and the concentration and fraction of defects and slip bands are analyzed, as well as changes in the elastic properties of the material under study (determining an acoustic parameter that takes into account the complex change in the velocities of longitudinal and transverse waves) and the coercive force. It has been established that cyclic loading of samples from the sections of the heat affected zone leads to the formation of a large number of structural defects in the form of deformation bands, discontinuities, and microcracks, the occurrence of which is accompanied by a considerable change in the numerical microstructure characteristics (a decrease in the value of fractal dimension) as well as elastic (a decrease in the values of acoustic parameters) and magnetic (an increase in coercive force) properties. It is also shown that cyclic loading of the material under study leads to an increase in microhardness. However, the nature of such an increase for overheating and normalizing zones is different. The results of the research can be applied to the problems of diagnosing premature destruction and monitoring the most loaded zones of St3 steel structures to determine the residual resource.
1 February 2023 in Inorganic Materials: Applied Research
The effect of hydrogen concentration on the structure and physicomechanical properties of the PT-7M titanium alloy has been studied. It is established that an increase in the amount of the TiHx hydride phase leads to embrittlement of the PT-7M grade alloy, which is confirmed by a decrease in the values of impact strength and an increase in microhardness. A method for a rapid ultrasonic testing of hydrogen embrittlement using bulk elastic waves has been proposed.
31 March 2023 in Chernye Metally
The paper considers the issues of structural degradation under alternating loading of 09Mn2Si steel samples obtained using wire arc additive manufacturing (WAAM). At the moment, an urgent task is to study the processes of accumulation of degradation of metal materials obtained by the WAAM method, as well as the search and testing by non-destructive testing of the damaged state of such materials. In the course of the work, an assessment of the mechanical properties of samples made of steel 09Mn2Si cut from the workpiece in the direction along and across the deposition of layers is given. The curves of low-cycle fatigue for longitudinally and transversely cut samples are studied. It was found that the mechanical properties (including fatigue) of samples cut along the direction of surfacing are up to 10 % higher than those of samples cut across. The structural changes taking place in the studied material during cyclic loading are shown. To assess structural changes, a method of digital analysis of microstructure images (determination of the fractal dimension index) obtained with different operating time was used. The change in the acoustic and magnetic characteristics of the printed material from the number of cycles under alternating loading and the relationship between operating time and coercive force are established. The results obtained in the work can be used to monitor the current state of printed parts and structures made of 09Mn2Si steel subjected to cyclic loading.The work was supported by the Russian Science Foundation grant No. 19-19-00332-P "Development of science-based approaches and hardware and software tools for monitoring the damage of structural materials based on artificial intelligence approaches to ensure the safe operation of technical facilities in the Arctic conditions".
27 September 2021 in Vestnik of Nosov Magnitogorsk State Technical University
AUAlekseev Nizhny Novgorod State Technical University
Alekseev Nizhny Novgorod State Technical University
+3
23 November 2020 in Russian Journal of Water Transport
The paper presents the results of the study of the relationship between the velocity of propagation of longitudinal waves in a metal with the values of impact toughness and hardness in a wide range of low temperatures. It’s been found that with a decrease of temperature, an increase of hardness, a decrease of impact toughness and an increase of the velocity of propagation of a longitudinal wave in the studied metals are observed, and the velocity of propagation of a longitudinal wave has a close correlation with the characteristics under consideration. An increase of the speed of sound with decreasing temperature, in our opinion, is explained by an increase of the thermal conductivity of metals. Thus, by the values of the speed of sound propagation in metals, it is possible to predict the level of its impact toughness, as well as hardness at low temperatures, and, consequently, the tendency to brittle fracture of structures.