Deep-blue perovskite light-emitting diodes (PeLEDs) of high purity are highly sought after for next-generation displays complying with the Rec. 2020 standard. However, mixed-halide perovskite materials designed for deep-blue emitters are prone to halide vacancies, which readily occur because of the low formation energy of chloride vacancies. This degrades bandgap instability and performance. Here, we propose a chloride vacancy–targeting passivation strategy using sulfonate ligands with different chain lengths. The sulfonate groups have a strong affinity for lead(II) ions, effectively neutralizing vacancies. Our strategy successfully suppressed phase segregation, yielding color-stable deep-blue PeLEDs with an emission peak at 461 nanometers and a maximum luminance ( Lmax ) of 2707 candela per square meter with external quantum efficiency (EQE) of 3.05%, one of the highest for Rec. 2020 standard–compliant deep-blue PeLEDs. We also observed a notable increase in EQE up to 5.68% at Lmax of 1978 candela per square meter with an emission peak at 461 nanometers by changing the carbon chain length.
5 March 2019 in The Journal of Physical Chemistry Letters
Py-Benz-Py exhibits unique photophysical properties attributable to the reduction of the energy gap between two electronic states by ESM, leading to ICT dynamics.
1 July 2020 in Journal of Industrial and Engineering Chemistry
We have synthesized single-crystalline horizontal and free-standing monoclinic CoGe nanowire (NW) arrays on high-k dielectric Y-stabilized ZrO2 (110) substrates via a chemical vapor transport process without using any catalysts. Horizontal NWs are grown epitaxially on the substrate. Three-dimensionally (3D)-kinked NWs are grown from the tip of the horizontal NWs homoepitaxially initiated by rotational twinning. Electrical measurements show that both horizontal and 3D-kinked CoGe NWs have low resistivity. The 3D-kinked NWs as well as free-standing metallic CoGe NWs integrated on Y-stabilized ZrO2 substrates could find applications as effective on-chip interconnects and nanoelectrodes for highly integrated nanoelectronic devices and as platforms for fuel cells and as efficient catalysts.
We report the generation of gold nanoparticles (AuNPs) from the aqueous solution of chloro(2,2′,2″-terpyridine)gold(III) ion ([Au(tpy)Cl]2+) through X-ray radiolysis and optical excitation at a synchrotron. The original purpose of the experiment was to investigate the photoinduced structural changes of [Au(tpy)Cl]2+ upon 400 nm excitation using time-resolved X-ray liquidography (TRXL). Initially, the TRXL data did not show any signal that would suggest structural changes of the solute molecule, but after an induction time, the TRXL data started to show sharp peaks and valleys. In the early phase, AuNPs with two types of morphology, dendrites, and spheres, were formed by the reducing action of hydrated electrons generated by the X-ray radiolysis of water, thereby allowing the detection of TRXL data due to the laser-induced lattice expansion and relaxation of AuNPs. Along with the lattice expansion, the dendritic and spherical AuNPs were transformed into smaller, raspberry-shaped AuNPs of a relatively uniform size via ablation by the optical femtosecond laser pulse used for the TRXL experiment. Density functional theory calculations confirm that the reduction potential of the metal complex relative to the hydration potential of X-ray-generated electrons determines the facile AuNP formation observed for [Au(tpy)Cl]2+.