7 July 2023 in IEEE Transactions on Automatic Control
In this paper, a distributed observer is designed for the state reconstruction of continuous-time linear dynamical systems with unknown inputs. Specifically, a group of sensor nodes are employed to measure the output of such a system. Due to its limited measurement, a single node may fail to reconstruct the full state. By acting on a consensus cooperative strategy, however, each node can produce an accurate state estimate, regardless of the specific input signal. The attractive performance of distributed unknown input observer relies on nothing but common neighboring communication, as well as an adequate local measurement that overlaps the effect of the unknow input along system dynamics. Correspondingly, the required network connectivity and rank conditions are given, with their linkages to the classic result being discussed.
8 June 2023 in Systems & Control Letters
3 April 2025 in IEEE Transactions on Automatic Control
This paper investigates the design of distributed observers for a class of nonlinear systems. The designed distributed observers reside in a network of sensor nodes. The communication links in the network enable each sensor node to estimate all states of the nonlinear system, even though each one can only collect a small portion of the system's outputs. However, all inputs of the system are still needed at each node to carry out a correct state estimation. For this problem, the paper further proposes a distributed nonlinear observer without using global inputs, in which each sensor node only needs partial input information of the nonlinear system.
23 June 2020 in IEEE Access
In order to simplify the design procedure of traditional neural network backstepping and improve the robustness and precision of control, an improved scheme is studied for a class of nonlinear systems. To avoid reconstructing virtual control inputs in each recursive step, RBF neural networks are utilized as approximators to estimate the desired feedback control of the whole system only. Meanwhile, the integral action of tracking error is introduced into the backstepping design procedure, which not only participates in updating the neural network weight, but also serves as a component part of the control input. This design may benefit the parameter tuning and make controller perform better sometimes. Based on the Lyapunov synthesis approach, theoretical analysis and simulation results are provided to show the feasibility of the improved scheme.