Luděk Strouhal

Luděk Strouhal

Auto-generated profile, based on publicly available information

Luděk Strouhal

CTU in Prague, Czech Republic

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 July 2018 in Stavební obzor - Civil Engineering Journal
Verified
Journal Article
Open access
PKPetr Kavka
Petr Kavka
LSLuděk Strouhal
Luděk Strouhal
BJBarbora Jáchymová
Barbora Jáchymová
Josef KrásaJosef Krása
Josef Krása
MBMarkéta Báčová
Markéta Báčová
MBMiroslav Bauer
Miroslav Bauer
Field observations and consecutive modelling of soil erosion events proved to be essential for understanding and predicting erosion and sediment transport. An experimental approach often utilizes a large variety of rainfall simulators. In this technical note a complex methodology is introduced, using a mobile rainfall simulator developed at the Czech Technical University in Prague. An experimental setup with two watered plots (16 + 1 m2) was established, which enables simultaneous measurements in two scales and monitoring of surface runoff, flow velocity, infiltration, sediment subsurface flow, vegetation cover effect suspended solids and phosphorus transport, surface roughness and surface evolution under rainfall and other variables. The simulator is built on a trailer transportable by car with folding arm carrying four FullJet WSQ nozzles operating independently. The configuration and water pressure 0.7 bar leads to the total watered area 2.4 x 9.6 m. Average drop size (d50) reaches 1.75 mm for 0.7 bar pressure. Christiansen uniformity index CU reaches 85%. A selection of experimental results highlights both the advantages and the weaknesses of the presented experimental setup.

28 February 2024 in Journal of Hydrology
Verified
Journal Article
Closed access
JKJan-František Kubát
Jan-František Kubát
LSLuděk Strouhal
Luděk Strouhal
PKPetr Kavka
Petr Kavka

5 July 2017 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Verified
Journal Article
Open access
PDF file
MLMartin Landa
Martin Landa
PKPetr Kavka
Petr Kavka
LSL. Strouhal
L. Strouhal
JCJ. Cepicky
J. Cepicky
Keywords: GIS, Open Source, Free Software, Deployment, Hydrology, GIS.lab, Gisquick Building a complete free and open source GIS computing and data publication platform can be a relatively easy task. This paper describes an automated deployment of such platform using two open source software projects – GIS.lab and Gisquick. GIS.lab (http: //web.gislab.io) is a project for rapid deployment of a complete, centrally managed and horizontally scalable GIS infrastructure in the local area network, data center or cloud. It provides a comprehensive set of free geospatial software seamlessly integrated into one, easy-to-use system. A platform for GIS computing (in our case demonstrated on hydrological data processing) requires core components as a geoprocessing server, map server, and a computation engine as eg. GRASS GIS, SAGA, or other similar GIS software. All these components can be rapidly, and automatically deployed by GIS.lab platform. In our demonstrated solution PyWPS is used for serving WPS processes built on the top of GRASS GIS computation platform. GIS.lab can be easily extended by other components running in Docker containers. This approach is shown on Gisquick seamless integration. Gisquick (http://gisquick.org) is an open source platform for publishing geospatial data in the sense of rapid sharing of QGIS projects on the web. The platform consists of QGIS plugin, Django-based server application, QGIS server, and web/mobile clients. In this paper is shown how to easily deploy complete open source GIS infrastructure allowing all required operations as data preparation on desktop, data sharing, and geospatial computation as the service. It also includes data publication in the sense of OGC Web Services and importantly also as interactive web mapping applications.

21 May 2013 in Selected Scientific Papers - Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
LSLuděk Strouhal
Luděk Strouhal
VDVaclav David
Vaclav David
The paper presents the essential differences in small catchment model behaviour depending on the assumed runoff procedure, i.e. infiltration or saturation excess. It suggests an appropriate model structure and a way to obtain the required boundary conditions. In order to design the flood mitigation measures in small catchments, there is a need of reliable prediction of their behaviour. Long time series of data are rather rare here and the simple models are usually not capable to reflect all the necessary variables and their distribution. However, more comprehensive models are usually very demanding with respect to input data. A model of Bykovicky stream catchment (6.3 km2) was built in the physically based distributed model GSSHA. Out of two years of rainfall-runoff data several events were used for model calibration. Gradually the model was changed in order to explain observed data better. First modelling outcomes suggested a significant influence of saturation excess on flood hydrographs in most of the scenarios. In order to reflect this, the model needs to contain groundwater related processes, but the data on groundwater table position was not available. Therefore a simple method how to obtain it was proposed and tested. The paper discusses the achievements of this modelling experiment.

13 December 2021 in Abstracts of the ICA
Verified
Journal Article
Open access
PDF file
PKPetr Kavka
Petr Kavka
LSLuděk Strouhal
Luděk Strouhal
JCJiří Cajthaml
Jiří Cajthaml

23 March 2020
Verified
Conference Paper
Open access
PKPetr Kavka
Petr Kavka
LSLuděk Strouhal
Luděk Strouhal
RKRomana Kubínová
Romana Kubínová
MKMarek Kaspar
Marek Kaspar
It this contribution partial results of the project, which is focused on hydrological modelling as a tool for designing small water management construction and soil conservation measure and in the landscape are presented. For the hydrological response, design rainfall and the initial condition, the current state of the river basin as well as the characteristics of the area under consideration are important. For the hydrological response, design rainfall, the current conditions of the catchment area as well as the characteristics of the solved area are important. Design precipitation in relation to initial conditions (soil moisture and surface condition) is one of the project goals. This data are important for hydrological modelling that is a tool for designing water management measures on small watercourses and in river basin areas is relevant for catchment size where long-term measurements and possible analogy cannot be used. The design of small hydrotechnical buildings based on hydrological modelling is used for catchments up to the area of ​​5 km2.Basic categorization of small catchments in the Czech Republic is presented. At present, the Czech catchments are categorized into four levels. From the main river catchment to the catchment of the category IV. order (small catchments). There are considerable differences in size in the fourth category. From catchment areas of over 20 km2 to supplementary catchment areas of less than 1 km2. The categorization of these catchments in terms of their potential hydrological response is described in the past. For the categorization of the territory of the Czech Republic at the level of small catchment areas in terms of hydrological response, the different size of the area is one of the hardly definable parameters.For these reasons, the project addresses also the delimitation of small catchments in the Czech Republic, which fall into the category of areas up to 5 km2 and significant areas outside the watercourse and their subsequent classification in terms of possible hydrological response. The activities were in this ongoing project focused on delimitation of these catchments and research of suitable data for their classification.Detailed model of terrain in the resolution 5x5 m and watercourse layer were used as input data for delimitation of small catchments. ArcGIS tools and Python scripting language were used for processing. As it is a relatively large data set, the following analyses were gradually repeated for the catchment III. order with the extension of the boundary, so as to ensure possible discrepancies between the delimitation of the basin and the distribution boards defined on the basis of a detailed terrain model.Nine categories were selected as significant areas ranging from contributing areas of 0,3 to 5,5 km2. In the category of the smallest catchments (categories from 0,3 to 0,7 km2) there are over 70 thousand areas defined in the Czech Republic. In the category from 4,5 to 5,5 km2 there are over 4 thousand catchments. A categorization both for individual classes and overall for the territory of the Czech Republic according to the largest contributing area is presented.